Advertisement
Quick Links
BLUETOOTH STEREO HEADSET
HA-W700BT -G
INSTRUCTIONS
Printed in China
© 2007 Victor Company of Japan, Limited
LNT0095-001B
Information for Users on Disposal of Old Equipment and
Batteries
[European Union only]
Products
These symbols indicate that equipment with these symbols should
not be disposed of as general household waste. If you want to
dispose of the product or battery, please consider the collection
systems or facilities for appropriate recycling.
Battery
Dear Customer,
This apparatus is in conformance with the valid European directives and
standards regarding electromagnetic compatibility and electrical safety.
European representative of Victor Company of Japan, Limited is:
JVC Technology Centre Europe GmbH
Company name changed in:
JVC Technical Services Europe GmbH
Postfach 10 05 52
61145 Friedberg
Germany
This product's performance would be degraded under a strong electro-static
environment. And the function would be self-recoverable after the above case.
This product's performance would be degraded since the disturbance from the mains
cord. And the function would be self-recoverable after the above case.
Declaration of Conformity with regard to the R&TTE Directive 1999/5/EC
0678
Hereby, JVC, declares that this HA-W700BT is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC.
Thank you for purchasing this JVC product.
Before you begin operating this unit, please read the operating instructions carefully to be sure
you get the best possible performance.
If you have any questions, consult your JVC dealer.
CAUTION
1. To reduce the risk of electrical shocks, fire, etc.:
● Do not remove screws, cover or cabinet.
● Do not expose this appliance to rain or moisture.
2. For your safety...
● Never use the unit when driving a car, motorcycle, or bicycle. This could result in an accident.
● Pay special attention to traffic around you when using the headphones outside. Failure to do
so could result in an accident.
● Be careful not to turn up the sound volume too high. Your hearing can be damaged from
listening to sounds at excessive volume for long periods.
● Do not disassemble or modify the unit.
● Do not allow flammable, water or metallic objects to enter the unit.
● If you find skin problems where the headphones are in contact with the skin, stop using the
headphones; otherwise, it may cause inflammation or irritation to the skin.
● In dry air such as in winter, you may feel a static shock when using the headphones.
3. Avoid using the headphones...
● in places subject to excessive humidity or dust
● in places subject to extremely high (over 40°C or 104°F) or low (under 0°C or 32°F) temperatures
4. DO NOT leave the unit...
● exposed to direct sunlight
● near a heater
5. To protect the unit, DO NOT...
● allow them to get wet
● shake them or drop them against hard objects
6. For using the headphones...
● Attach the ear pieces firmly when replacing them; otherwise, the ear pieces may be left in your
ears when taking the headphones off. If the ear piece is left in your ear, be careful not to push it
deep into the ear canal.
Be careful not to apply the power that exceeds the headphones' input capacity. This may result in
sound distortion and could damage the oscillation board.
Grasp and pull the plug itself to disconnect the headphones. Do not pull on the cord.
When the ear pieces get dirty, detach the ear pieces and wash them in water-diluted detergent.
After washing, dry the ear pieces and attach to the headphones.
Replace the ear pieces when: they lose its elasticity; they are stained badly; they are broken or
deformed.
The ear pieces will deteriorate with age even in normal use and maintenance.
Store the ear pieces in a place where children cannot reach to avoid the risk of the accident such
as swallowing them.
● When using canal type headphones, you may hear the sound of cord rubbing together or the
sound of vibrations which travels through your body when walking.
7. For safe use of battery...
● Use only the supplied charging unit to charge the battery.
● Be sure to use the supplied AC adaptor.
● There are no serviceable parts inside. Consult your dealer to replace the built-in battery.
● When discarding batteries, environmental problems must be considered and the local rules
or laws governing the disposal of these batteries must be followed strictly.
Features
This unit is a wireless stereo headset using Bluetooth® wireless technology.
As Bluetooth Stereo Headset
Music & Call
Music
Call
Control
Control
Control
Bluetooth cell phone
Bluetooth cell
iPod with Bluetooth
with music player
phone
Transmitter (AA-T100BT)
About Bluetooth
Bluetooth is a short-range wireless radio communication technology for the mobile device such as
cellular phones, portable PCs, and other devices. The Bluetooth devices can be connected without
cables and communicate each other.
About Bluetooth Profile
Bluetooth Profile designates the way of communication between Bluetooth devices. The system
supports the following Bluetooth Profiles.
A2DP: Advanced Audio Distribution Profile
The profile controls sending/receiving the high-quality audio contents.
AVRCP: Audio/Video Remote Control Profile
The profile controls the functions of audio/video devices such as playing, stopping, pausing and
volume control.
HSP: Headset Profile
The profile controlling the cell phone, and controlling the connection between the devices.
HFP: Hands-Free Profile
The profile controls the hands-free call with cell phone.
Parts name
2
345 6
1
q
8
9
p
Battery charging
Charge the built-in lithium-ion rechargeable battery first to use this unit.
1 Connect the AC adaptor to the charging unit.
• Do not use any AC adaptor other than the supplied one.
2 Connect the AC adaptor to the AC outlet.
3 Put the unit on the charging stand.
The red lamp lights up when the charging starts.
The blue lamp will light up when the charging is finished (the red lamp will turn off).
• When the unit is turned off, it takes five hours to charge the battery to full when it is empty.
• Disconnect the AC adaptor from the AC outlet when you do not use the charging unit for a
extended period of time.
• Do not pull the cord when disconnecting the AC adaptor.
• Do not handle the power cord with wet hands!
• Do not bend the power cord sharply.
As Bluetooth Receiver
Connection cord
(supplied) 0.7 m (2.3 ft)
Music
Audio in
AC adaptor
Bluetooth audio source
About pairing
Pairing creates a unique and encrypted link between two Bluetooth devices and lets them
communicate with each other. Bluetooth devices will not work if the devices have not been paired.
Cautions on Bluetooth communication
• Microwaves emitted from Bluetooth devices may affect the operation of electronic medical
devices. Turn off this unit and other Bluetooth devices in hospitals, airplanes, trains, or crowding
places.
• Bluetooth devices use 2.4 GHz band, which is the same as that used by wireless LAN devices and
microwave oven. Interference may occur near these devices and cause noise, disconnectivity, or
a decrease of communication speed.
• Connection with all Bluetooth devices cannot be guaranteed. Connectivity, operation, display
indication or function may differ depending on the characteristics and specification of the
devices.
• Some Bluetooth devices take more time to establish connection.
• To use the Bluetooth functions, the Bluetooth devices are required to be compatible with the
same Bluetooth profiles as this unit is. However, the functions may not be available depending
on the specifications of the Bluetooth device even when it is compatible with the same profiles.
1
(CALL) button
Controls the cellular phone calling through this unit.
2 Strap hole
3 Control switch (6 button, +/– buttons)
• 6 button: Controls the music player connected with this unit.
• +/– buttons: Adjusts the volume level. When you press + or – button with
the highest or lowest volume level, beep sound is heard.
7
4 Red lamp
Indicates the battery status of this unit.
5 Blue lamp
Indicates the communication status between this unit and Bluetooth device.
6 Microphone
Picks up your voice when calling through this unit.
7 Stereo mini jack
8 Headphones
9 Battery charge terminal
p Clip
q POWER switch
Slides to turn on or off this unit.
Battery charge
terminal
• Checking the battery charge
Press the 6 button while holding the CALL button. (Press the 6 button within two seconds
after pressing CALL button.) The red lamp lights or flashes to show the battery remains.
• The red lamp starts slow flashing automatically when the battery become nearly empty.
Red lamp
Battery level
●
Full
●-●-●-●-●-●-●
Halfway
●-●------------●-●
Low
●---------------●
Need to charge
Optional (not supplied)
Bluetooth Transmitter
(AA-T100BT)
Advertisement
Related Manuals for JVC HA-W700BT-G
Summary of Contents for JVC HA-W700BT-G
- Page 1 The profile controls the functions of audio/video devices such as playing, stopping, pausing and devices. Hereby, JVC, declares that this HA-W700BT is in compliance with the essential volume control. • Some Bluetooth devices take more time to establish connection.
- Page 2 • Do not take off the battery from its case when you dispose of the battery. The device shows the list of Bluetooth devices found. The unit is recognized as “JVC HA-W700BT”. Repeat from Step 1 again when • Do not cut two cords at the same time since it may cause a short-circuit.