Hardware Overview; Front Panel - D-Link DXS-3600-16S Quick Installation Manual
3 fan, ac power supply, 1 expansion slot, 8-port 10gbase-x sfp+, l3 management stacked switch
Hide thumbs
Also See for DXS-3600-16S:
- Manual (695 pages) ,
- Hardware installation manual (36 pages) ,
- Hardware installation manual (55 pages)
Table of Contents
Advertisement
Available languages
Available languages
Hardware Overview
Front Panel
Port
SD Card Slot
Management port (MGMT)
Console Port
Ports 1-8
Expansion Module Slot
Description
This port can be used to insert an external SD memory card. The maximum
capacity SD card that can be inserted into this port is 32 Gb.
This is a 10/100/1000 Mbps Out-Of-Band management port that can be used to
configure this switch without being connected to the network.
This port is an RJ-45 connection port that can be used to connect to the Command
Line Interface (CLI) of this switch for configuration, management and monitoring.
This port uses a special console cable (included with the packing) with a DB-9
interface to connect the Switch to a PC's COM port.
This switch is equipped with SFP/SFP+ ports. These ports can operate at 10 Gbps
speeds and support a vast collection of SFP, WDM SFP, SFP+, WDM SFP+ and
QSFP+ transceivers.
This slot can be equipped with several kinds of additional modules. These modules
are not included and should be bought separately:
• DXS-3600-EM-4XT (Four 10GBase-T Copper ports).
• DXS-3600-EM-8T (Eight 1000Base-T Copper ports).
• DXS-3600-EM-4QXS (Four 40Gbps QSFP+ transceiver slots).
• DXS-3600-EM-8XS (Eight 10Gbps SFP+ transceiver slots).
3
Advertisement
Table of Contents
