Dismantling The Filter Silencer; Fig. 33: Dismantling The Filter Silencer - ABB A200-L Operation Manual
Turbocharger
Hide thumbs
Also See for A200-L:
- Assembly instructions manual (20 pages) ,
- Operation manual (148 pages)
Table of Contents
Advertisement
Operation Manual / A200-L
9 Disassembly and assembly / 9.5 Dismantling the filter silencer
9.5
Dismantling the filter silencer
9.5.1
Design variants
The turbocharger is equipped with one of the following filter silencer variants:
¡
Welded filter silencer
¡
Cast filter silencer
The filter silencers differ in terms of the fixing eyelets for the lifting gear. The relevant vari-
ant must be taken into consideration for disassembly and assembly.
9.5.2
Dismantling the filter silencer (welded)
Dismantle the insulation if necessary.
u
Fig. 33: Dismantling the filter silencer
1. Attach lifting gear to the eyelets of the filter silencer (81000).
2. Loosen nuts (72004) and remove with washers (72003).
3. Remove and put down filter silencer.
© Copyright 2021 ABB. All rights reserved.
HZTL4036_EN
Rev.T
December 2021
- Quick Links:
- Introduction
Hide quick links:
Advertisement
Chapters
Table of Contents
