Table of Contents
Advertisement
7-2. SCHEMATIC DIAGRAMS
Note:
•
All capacitors are in µF unless otherwise noted.
•
All electrolytic capacitors are rated at 50V unless otherwise
noted.
•
All resistors are in ohms.
kΩ = 1000Ω, MΩ = 1000kΩ
•
Indication of resistance which does not have rating electrical
power is as follows.
Pitch: 5 mm
Rating electrical power 1/4W (CHIP: 1/10W)
•
: nonflammable resistor.
•
¢
: internal component.
•
: panel designation or adjustment for repair.
•
All variable and adjustable resistors have characteristic curve
B unless otherwise noted.
•
Readings are taken with a color-bar signal input.
no mark
: Common
(
)
: PAL
[
]
: NTSC 3.58
•
Readings are taken with a 10MΩ digital multimeter.
•
Voltage are dc with respect to ground unless otherwise
noted.
•
Voltage variations may be noted due to normal production
tolerances.
•
All voltages are in V.
•
∗
: Cannot be measured.
•
Circled numbers are waveform references.
•
: B + bus.
•
: B – bus.
•
÷
: signal path.
Reference information
RESISTOR
: RN
METAL FILM
: RC
SOLID
: FPRD
NONFLAMMABLE CARBON
: FUSE
NONFLAMMABLE FUSIBLE
: RS
NONFLAMMABLE METAL OXIDE
: RB
NONFLAMMABLE CEMENT
: RW
NONFLAMMABLE WIREWOUND
: ✽
ADJUSTMENT RESISTOR
COIL
: LF-8L
MICRO INDUCTOR
CAPACITOR
: TA
TANTALUM
: PS
STYROL
: PP
POLYPROPYLENE
: PT
MYLAR
: MPS
METALIZED POLYESTER
: MPP
METALIZED POLYPROPYLENE
: ALB
BIPOLAR
: ALT
HIGH TEMPERATURE
: ALR
HIGH RIPPLE
Note:
The component identified by shading and
mark ! are critical for safety. Replace only
with part number specified.
All manuals and user guides at all-guides.com
– 49 –
KV-DR29N93
RM-992
Advertisement
Chapters
Table of Contents
