Page 2
WARNING: THIS WARNING IS WARNING APPLICABLE FOR OTHER COUNTRIES. 1 Use the approved Power Cord (3-core To reduce the risk of fire or electric mains lead) / Appliance Connector / Plug shock, do not expose this apparatus with earthing-contacts that conforms to to rain or moisture.
Page 3
Canadian ICES-003. For the customers in Europe No caso de vazamento da pilha, evite o The manufacturer of this product is Sony contato com a mesma. Lave qualquer parte Corporation, 1-7-1 Konan, Minato-ku, do corpo afetado com água abundante.
Page 4
If voltage adaptation • Leave space around the unit (page 5). is required, consult with qualified Sony personnel. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified Sony personnel before operating it further.
Page 5
• Do not use the Security bar for the purpose • Avoid using the unit in a location where of preventing theft for transporting or the temperature or humidity is very high, installing the unit. If you lift the unit by the or temperature is very low.
Page 6
Sony personnel. • On cleaning the cabinet: Clean the cabinet gently with a soft cloth. Stubborn stains may be removed with a...
a message displayed on the projected image, even if the lamp normally lights. For carrying This unit is precision equipment. When carrying the unit, do not subject the unit to shocks, or fall. It may damage the unit. Precautions...
Pull out the battery compartment with a stick as shown in the illustration. AC power cord (1) HD D-sub 15 pin cable (1.8 m) (1) (1-967- 100-11/Sony) Insert a lithium battery. With the 3 (plus) side facing up. Quick Reference Manual (this manual) (1)
Selecting the Menu Language The factory setting for the language for displaying menus, messages, etc. is English. To change the on-screen language, proceed as follows: Plug in the AC power cord into a wall MENU SETTING Input-A outlet. Status Language English Turn on the projector.
Projecting an Image The size of a projected image depends on the distance between the projector and screen. Install the projector so that the projected image fits the screen size. For details on projection distances “Projection Distance” and projected image sizes, see Computer Video equipment Projector...
Adjusting the Projected image Focus Position Adjuster adjustment button Adjusting the tilt of the projector with the adjusters You can adjust the height of the projector using the adjusters. By changing the slope of the projector with adjusters, you can adjust the position of the projected image.
Page 12
Changing the aspect ratio of the projected image Press ASPECT on the remote commander to change the aspect ratio of the projected image. You can also change the setting in Aspect of the INPUT SETTING menu. Correcting trapezoidal distortion of the projected image (Keystone feature) Keystone feature may not work automatically when the screen is tilted.
Turning Off the Power Press the ?/1 key on the main unit or the Remote Commander. The message appears. Press it again according to the message. Unplug the AC power cord from the wall outlet. After step 1, the fan continues to run for a while to reduce internal heat, however, you may also unplug the AC power cord before the fan stops.
Page 14
Flashes in red The projector is in abnormal status. Symptoms are indicated by number of flashes. Address the problem in accordance with the following. If the symptom is shown again, consult with qualified Sony personnel. Flashes twice The internal temperature is unusually high. Check the items below.
Do not put your hands into the slot. • If the lamp breaks, contact qualified Sony personnel. Do not replace the lamp yourself. • When removing the lamp, be sure to pull it out straight, by holding the designated location.
Page 16
Insert the new lamp all the way in until Caution it is securely in place. Tighten the Disposal of the used lamp 2 screws. For the customers in the USA Lamp in this product contains mercury. Disposal of these materials may be regulated due to environmental considerations.
If the dust cannot be removed from the air filter even after cleaning, replace the air filter with a new one. For details on a new air filter, consult with qualified Sony personnel. Caution If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to a possible malfunction or fire.
Page 18
à la norme NMB-003 du Canada. Pour les clients en Europe Afin de réduire les risques d’incendie ou d’électrocution, ne pas exposer Le fabricant de ce produit est Sony cet appareil à la pluie ou à l’humidité. Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japon.