Table of Contents
Advertisement
Flat ("SQ-1")
Rock ("SQ-2")
General features
Top 40 ("SQ-3")
System Q
You can recall the best audio setting preset for different types
of the music.
Switching the Preset Sound Setting:
Each time you press the Q button, the preset sound setting
switches as follows:
Scan of Flat – Easy ("SCAN/SCAn")
(Default setting)
Flat ("FLAT/SQ-1")
Rock ("ROCK/SQ-2")
Top 40 ("TOP 40/SQ-3")
As you proceed, each indicator would go on.
NOTE
The System Q function changes the values of the following
sound quality parameters:
Scan of Flat, Rock – Easy
Bass center frequency, bass level, bass quality factor, bass
(Default setting)
extend, middle center frequency, middle level, middle quality
factor, treble center frequency, and treble level.
Flat
Note that some of these parameters cannot be controlled by the
audio control setting feature.
User memory*
Their setting values are different depending on the setting of the
Rock
mobile preset plan mode.
Audio Control Setting
Adjust various parameters of sound quality.
1
Press the AUD button for at least one second to enter the
control mode.
2
Selecting mode
Press either the FM or AM button.
Each time the button is pressed, the adjustment mode will
change as follows:
Easy ("SQ-6")
Jazz ("SQ-5")
Pops ("SQ-4")
Easy ("EASY/SQ-6")
Jazz ("JAZZ/SQ-5")
Pops ("POPS/SQ-4")
Easy
Jazz
Pops
*User memory:
The unit returns to the state
Top 40
adjusted the last time with
the audio control setting feature.
Pressing the FM button advances the display, and pressing the
AM button reverses it.
Fader
Bass
Middle
Balance
Treble
NOTE
Source tone memory
Flat ("SQ-1")
Each source (CD, MD, FM, AM and disc changer) has its own
Rock ("SQ-2")
memory in which to store the bass, middle, and treble tone
settings.
Top 40 ("SQ-3")
The settings made for a particular source are recalled
automatically whenever you use that source (for example, FM
mode uses the tone settings made for FM, AM for AM, etc.).
3
Adjust each mode
Press the 4/¢ button.
Look at the table to adjust the mode being displayed.
Adjustment
mode
(Display)
Bass ("BAS")
Bass decreased.
Middle("MID") Middle decreased.
Treble("TRE")
Treble decreased.
Balance
Left channel emphasized.
("BAL/BL")
Fader
Rear channel increased.
("FAD/FD")
4
Press the AUD to end the control mode.
NOTE
Determining the parameters in the audio control setting would
clear all the adjustments made in the System Q and they are
replaced with the values in the audio control setting.
— 10 —
Scan of Flat – Easy ("SCAn")
Easy ("SQ-6")
Jazz ("SQ-5")
Pops ("SQ-4")
Operation of Audio control button
4 button
¢ button
Bass increased.
Middle increased.
Treble increased.
Right channel emphasized.
Front channel increased.
Hide quick links:
Advertisement
Table of Contents
