Table of Contents
Advertisement
9.7
Communication Connections
NOTE
i
i
Be aware of the safety instruction in chapter
If you do not connect cables to the communication connectors, Siemens recommends covering the connec-
tors with a cap or dummy plug (not included in the delivery) to prevent the contacts from becoming dirty.
Ethernet Interface
[le_Q100_communication _connections, 1, --_--]
Figure 9-15
(1)
Ethernet interface Z
The device is equipped with 1 Ethernet interface. The data are exchanged via the RJ45 plug connector.
Further Technical data see chapter
The device features an internal Ethernet switch. It is therefore possible to connect a Y-cable to the Ethernet
interface in order to cascade devices with an Ethernet interface. You can enable or disable the internal
Ethernet switch in the parameterization. If you use a Y cable and the internal Ethernet switch, the device can
be connected with a SICAM I/O Unit. This device combination can be connected with the process control via
the second connector of the Y cable and an external Ethernet switch.
SICAM, SICAM P850/P855 7KG85X, Manual
E50417-H1040-C482-A9, Edition 03.2022
Communication Interface, Ethernet Interface
12.1.3 Communication
Safety Notes, Page
188.
Interfaces.
Commissioning and First Steps
9.7 Communication Connections
207
Advertisement
Table of Contents
Troubleshooting
