Table of Contents
Advertisement
5
" PDP-508XC
MONITOR
OUT
WOOFER
SUB
(Rear view)
MONITOR
SUB
OUT
WOOFER
Stereo audio
cable
AV amp
HDMI compliant cable
(HDMI cable having the
HDMI mark)
BD player
DVD recorder
Example 1: When an AV amplifier that supports
HDMI Control is connected
Check that the following conditions are met:
• The connected equipment must support the HDMI
Control function.
• The equipment must be connected to the INPUT
connector that has been selected in "Input Setting" on
the HDMI Control Setting menu.
• The connections must be made properly, as shown in the
above figures (in a case where an AV device, such as an
AV amplifier, and a DVD recorder/BD player are
connected, in a case where only a DVD recorder/BD
player is connected, and in a case where an AV device,
such as an AV amplifier, which does not support
HDMI-CEC, is connected).
• When an AV device that supports the HDMI Control
function is connected, it must be connected between the
PDP and a DVD recorder/BD player.
• The HDMI Control function must be activated on the
connected equipment (DVD recorder, BD player, AV
device [AV amplifier, etc.]).
(Refer to the instruction manual of the connected
equipment.)
5
6
(Rear view)
MONITOR
SUB
OUT
WOOFER
Stereo
audio cable
HDMI compliant cable
(HDMI cable having the
HDMI mark)
AV amp
Example 2: When an AV amplifier that does
not support HDMI Control is connected
PDP-508XG
6
7
MONITOR
SUB
OUT
WOOFER
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
" Confirmation of the number of connected devices
Check that the number of connected devices does not
exceed the maximum number for guaranteed operations.
Equipment
DVD recorder
BD player
AV System
" Confirmation of settings
Check that the settings for the HDMI Control function are
properly made. (For details, refer to "Setting the HDMI
Control" in the Operating instructions.)
Check that the following conditions are met:
• "Input Setting" on the HDMI Control Setting menu must
be set to the same input as that to which the equipment
that supports the HDMI Control function is connected.
• When Power Off Control, Power-On Ready, or Hold
Sound Status are to be used, their settings must be On.
7
8
MONITOR
OUT
WOOFER
SUB
(Rear view)
HDMI compliant cable
(HDMI cable having the
HDMI mark)
DVD recorder
Example 3: When an AV amplifier
is not connected
Maximum
Number
2
2
1
8
A
B
C
D
E
F
33
Hide quick links:
Advertisement
Table of Contents
