hit counter script
Panasonic NV-GS80E NV-GS80EB Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Camcorder
  5. NV-GS80EB
  6. Service manual

Panasonic NV-GS80E NV-GS80EB Service Manual

Hide thumbs Also See for NV-GS80E NV-GS80EB:
Table of Contents

Advertisement

Quick Links

Download this manual
Digital Video Camcorder
NV-GS80E NV-GS80EB
NV-GS80EE NV-GS80EF
NV-GS80EG NV-GS80EK
NV-GS80EP NV-GS85EE
NV-GS85GC NV-GS88GK
Vol. 1
Colours
(S)...................Silver Type
© 2007 Matsushita Electric Industrial Co., Ltd. All
rights
reserved.
distribution is a violation of law.
ORDER NO. VM0702004CE
Unauthorized
copying
and

Advertisement

Table of Contents
loading

Related Manuals for Panasonic NV-GS80E NV-GS80EB

Summary of Contents for Panasonic NV-GS80E NV-GS80EB

  • Page 1 ORDER NO. VM0702004CE Digital Video Camcorder NV-GS80E NV-GS80EB NV-GS80EE NV-GS80EF NV-GS80EG NV-GS80EK NV-GS80EP NV-GS85EE NV-GS85GC NV-GS88GK Vol. 1 Colours (S)....Silver Type © 2007 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying distribution is a violation of law.

  • Page 2: Table Of Contents

    CONTENTS Page Page 1 Safety Precautions 9.1. Cleaning Lens, Viewfinder and LCD Panel 1.1. General Guidelines 9.2. How to use the DVC Head Cleaning Tape / VFK1451 2 Warning 10 Block Diagrams 2.1. Prevention of Electro Static Discharge (ESD) to 11 Schematic Diagrams Electrostatically Sensitive (ES) Devices 11.1.

  • Page 3: Safety Precautions

    1 Safety Precautions 1.1. General Guidelines 1. IMPORTANT SAFETY NOTICE There are special components used in this equipment which are important for safety. These parts are marked by in the Schematic Diagrams, Circuit Board Layout, Exploded Views and Replacement Parts List. It is essential that these critical...

  • Page 4: Warning

    2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Electrostatically Sensitive (ES) Devices. Examples of typical ES devices are integrated circuits and some field-effect transistors and semiconductor "chip"...

  • Page 5: Caution For Ac Cord (Vja0940 Type)

    A replacement fuse cover can be purchased from your local Panasonic Dealer. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 6: How To Replace The Lithium Battery

    "Disassembly and Assembly Instructions.") NOTE: This Lithium battery is a critical component. (Type No.: CGR-F/202AW Manufactured by Panasonic.) (Not supplied) It must never be subjected to excessive heat or discharge. It must therefore only be fitted in equipment designed specifically for its use.

  • Page 7: Service Navigation

    3 Service Navigation 3.1. Introduction This service manual contains technical information which will allow service personnel´s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, this information will be followed by supplement service manual to be filed with original service manual.

  • Page 8: Specifications

    4 Specifications...

  • Page 9: Service Mode

    5 Service Mode 5.1. Error Display "PUSH THE RESET SWITCH" is displayed automatically on the EVF or the LCD Monitor when an undesirable condition has occurred. Fig. 1 Note: When "PUSH THE RESET SWITCH" is displayed repeatedly, service is required. Check the Error Code which is listed in the Service Menu.
  • Page 10 To perform the factory setting After repairing, perform this operation to clear the Mechanism lock code and Lens motor lock code. 1. Set to Service Menu. 2. Press [JOYSTICK CONTROL UP/DOWN] to select item [1]. 3. Press [JOYSTICK CONTROL RIGHT] to display [NO/YES] screen. 4.

  • Page 11: Service Fixture & Tools

    6 Service Fixture & Tools 6.1. Service Fixture and Tools...

  • Page 13: Service Position

    6.2. Service Position 6.2.1. Extension Cables for Service Position Using the following Extension Cables, place the unit as shown for check and service. Note: 1. The LCD open/close Switch is for changing between LCD Display and EVF Display. When turning on EVF Display, close the LCD Shaft so that LCD open/close Switch stays ON.
  • Page 14 Fig. 3...

  • Page 15: Removal/Installation Of F.p.c. From Non Zif

    6.3. Removal/Installation of F.P.C. From Non ZIF (Zero Insertion Force) Connector Removal/Installation of F.P.C. from the Non ZIF (Zero Insertion Force) connector: 1. The Non ZIF connectors and the ZIF connectors are used on the unit. And there are 2 types (Type A, Type B) of Non ZIF connectors.

  • Page 16: Method For Loading/Unloading Of Mechanism

    6.4. Method for Loading/Unloading of Mechanism CAUTION: If loading does not start after DC Power Supply is applied, DO NOT continue to apply DC Power. Apply +3 VDC Power Supply to the Loading Motor terminals. Loading: DC (-) to Portion "a," DC (+) to Portion "b" Unloading: DC (+) to Portion "a,"...

  • Page 17: Special Note

    6.6. Special Note All integrated circuits and many other semiconductor devices are electrostatically sensitive and therefore require the special handlings techniques described under "ELECTROSTATICALLY SENSITIVE (ES) DEVICES" section of this service manual.

  • Page 18: Disassembly And Assembly Instructions

    7 Disassembly and Assembly Instructions 7.1. Cabinet Section 7.1.1. DISASSEMBLY FLOWCHART This flow chart indicates the disassembly steps of the cabinet parts and the P.C.Boards in order to gain access to item (s) to be serviced. When reassembling, perform the step (s) in the reverse order.
  • Page 19 7.1.2. Disassembly Method MAIN PARTS PORTION STEP Ref. Section NOTE PART REMOVE Bottom Unit 6(519), (537) 2(519), 3(537), Front Case Ass'y FP6501 2(518), 3(519), Side R Shaft Unit & LCD Ass'y FP81 2(519), (537), EVF Unit FP91 2(537), FP31, Lens Ass'y FP71, FP72 Battery Case Unit 2(519), FP11...
  • Page 20 Note: MAIN PARTS SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2. The parts indicated by the dotted line are for Ass'y only and are not supplied.
  • Page 21 FRONT CASE PORTION STEP Ref. Section NOTE PART REMOVE Front P.C.B. 5(537) ----- Front Case Unit How to read chart shown above: A: Order of Procedure steps. When reassembling, perform steps(s) in reverse order. B: Ref No. C: Part to be removed or installed. D: Section No.
  • Page 22 Note: FRONT AND BOTTOM CASE SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2. The parts indicated by the dotted line are for Ass'y only and are not supplied.
  • Page 23 SIDE R SHAFT & LCD PORTION STEP Ref. Section NOTE PART REMOVE LCD Case A 2(519), 8(L-1) Side R Shaft Unit FP8101 LCD Case B 3(L-2) (533), 3(L-3), LCD Backlight FP8102 P.C.B LCD Panel Ass'y 3(L-4) LCD Shield Case STEP Ref.
  • Page 24 Note: SIDE R SHAFT UNIT AND LCD SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2.
  • Page 25 CCD & LENS PORTION STEP Ref. Section NOTE PART REMOVE CCD P.C.B 2(536) Filter Rubber ----- Optical Filter ----- STEP Ref. Section NOTE PART REMOVE Lens Angle (533) Zoom Motor Unit 2(538),Unsolder Focus Motor Unit 2(538),Unsolder How to read chart shown above: A: Order of Procedure steps.
  • Page 26 CCD AND LENS SECTION Note: 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2. The parts indicated by the dotted line are for Ass'y only and are not supplied.
  • Page 27 EVF PORTION STEP Ref. Section NOTE PART REMOVE EVF Earth Plate 2(519), 2(L-1) EVF Base Frame FP8901 EVF Spring (519), 2(L-2) EVF Backlight ----- F.P.C. STEP Ref. Section NOTE PART REMOVE Eye Cap 2(533) EVF Lens Unit ----- Eye Sight Lever ----- How to read chart shown above: A: Order of Procedure steps.
  • Page 28 Note: EVF SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2. The parts indicated by the dotted line are for Ass'y only and are not supplied.
  • Page 29 Notes in chart 1. Removal of Bottom Unit 3. Removal of Side R Shaft Unit & LCD Ass'y 1) Release the Hand Strap. 1) Remove the 5 Screws (518, 519). 2) Remove the 7 Screws (519, 537). 2) Disconnect the F.P.C. from Connector FP81. Installation of Side R Shaft Unit &...
  • Page 30 4. Installation of EVF Unit 6. Removal of Battery Case Unit 1) Connect the F.P.C. to Connector FP91. 1) Open the Cassette Cover to remove the 2 Screws 2) Insert EVF Earth Plate into the gap, and tighten the 3 (519).
  • Page 31 7. Installation of Main P.C.B. 9. Replacement of Mechanism Chassis Ass'y When replacing the Main Chassis Ass'y or the Cylinder Take care not to damage the F.P.C.s. Unit, be sure to perform the Envelope Output Adjustment. 1) Connect the F.P.C.s to the connectors on the Main Refer to "ENVELOPE OUTPUT ADJUSTMENT"...
  • Page 32 10. Installation of Front P.C.B. 12. Installation of LCD Backlight P.C.B., LCD Panel Ass'y, Install the Front P.C.B. with the 5 bosses, and tighten the LCD Shield Case Unit and LCD Case B 5 Screws (537). Use extreme care regarding LEDs when handling the LCD Backlight P.C.B.
  • Page 33 13. Installation of LCD Panel, Reflect Sheet, Lead Light Reflect Sheet Panel, Diffusion Sheet, BEF Sheet, BEF Sheet A and Panel Holder Unit a. When replacing the LCD Panel, the Diffusion Sheet, the BEF Sheet and the BEF Sheet A, make sure to remove the Protection Sheets.
  • Page 34 14. Removal of CCD P.C.B., Filter Rubber and Optical Filter 16. Installation of EVF Backlight F.P.C., EVF Spring, EVF CAUTION: Base Frame and EVF Earth Plate 1) When removing the CCD P.C.B., take care that the Take care not to damage the F.P.C. and the Switch. Optical Filter does not fall out.
  • Page 35 17. Removal of Eye Cap Remove the Eye Cap after removing the 2 Screws (533). 18. Handling Cautions of EVF Lens Unit Use extreme care when handling the EVF Lens Unit to avoid damage, dust, and spots (especially fingerprints, etc.) Installation of EVF Lens Unit, Eye Sight Lever 1) Install the Eye Sight Lever into the EVF Case hole in the direction shown.

  • Page 36: Mechanism Section

    7.2. Mechanism Section Item / Part Fig. Removal (Screw, Connector, Flex. & Other) Cassette Up Unit Fig. M1 Move the mechanism into Eject position (For Battery) Fig. M2 4-Tabs Cylinder Unit Fig. M3 1-Screw (A) 3-Screw (B) <Eject Position> Battery Fig.
  • Page 37 Screw (A) Cylinder Unit Screws (B) Fig. M3...

  • Page 38: Measurements And Adjustments

    8 Measurements and Adjustments 8.1. Mechanical Adjustment 8.1.1. ENVELOPE OUTPUT ADJUSTMENT When replacing the Main Chassis Unit or the Cylinder Unit, be sure to perform the Envelope Output Adjustment as shown below. 1. Remove the Bottom Case Unit. (Refer to "Disassembly and Assembly Instructions") 2.
  • Page 39 Fig. E1-2...

  • Page 40: Electrical Adjustment

    8.2. Electrical Adjustment 8.2.1. Initial Guideline The table below shows which adjustments are necessary according to the unit parts and individual parts to be replaced. Make sure to perform these adjustments shown below as necessary.
  • Page 41 6. When EEPROM data has been saved, the menu will 8.2.2. Installation of USB-SERIAL driver appear. Execute the "Setup.exe" file in "ComMass" folder by double To perform each adjustment, display the adjustment menu clicking to install the USB-SERIAL driver. by selecting from "Camera Adjust" or "VCR Adjust" and 8.2.3.

  • Page 42: Maintenance

    9 Maintenance 9.1. Cleaning Lens, Viewfinder and LCD Panel Do not touch the surface of the lens, Viewfinder and LCD Panel with your hand. When cleaning the lens, use air-blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and gently wipe the surface. Note: Lens cleaning paper and lens cleaner are available at camera shops, etc.

  • Page 43: Block Diagrams

    10 Block Diagrams OVERALL BLOCK DIAGRAM MAIN P.C.B. SIDE L OPERATION UNIT IC1001, 1002, ETC FP61 IC6001 +3.3V RESET SW BATTERY CASE UNIT ACCESS LED ON(L) UNREG/NOREG IC6003 LED DRIVE ACCESS LED SERIAL DATA/CLOCK POWER SW BATTERY EEPROM POWER SW +2.5V P1203 FP11...

  • Page 45: Schematic Diagrams

    11 Schematic Diagrams 11.1. SCHEMATIC DIAGRAM & CIRCUIT BOARD LAYOUT NOTES 1. Important safety notice 3. Parts marked "PT" are not used in any models included in this service model. Components identified by the sign have special characteristics important for safety. When replacing any C6011 C6011 R6097...

  • Page 46: Front Schematic Diagram

    11.2. FRONT SCHEMATIC DIAGRAM FRONT SCHEMATIC DIAGRAM NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, PARTS MARKED "PT" ARE NOT USED. REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 47: Lcd Backlight Schematic Diagram

    11.3. LCD BACKLIGHT SCHEMATIC DIAGRAM LCD BACKLIGHT SCHEMATIC DIAGRAM NOTE: NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, ALL INDIVIDUAL PARTS EXCEPT D8102, D8104, D8107, D8109 AND D8111 PARTS MARKED "PT"...

  • Page 48: Evf Backlight / Evf Fpc / Battery Case

    11.4. EVF BACKLIGHT / EVF FPC / BATTERY CASE SCHEMATIC DIAGRAMS NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, PARTS MARKED "PT"...

  • Page 49: Ccd / Side L Operation / Lcd Sw Schematic

    11.5. CCD / SIDE L OPERATION / LCD SW SCHEMATIC DIAGRAMS NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, PARTS MARKED "PT"...

  • Page 50: Interconnection Schematic Diagram

    11.6. INTERCONNECTION SCHEMATIC DIAGRAM INTERCONNECTION SCHEMATIC DIAGRAM NOTE: For placing a purchase order of the parts, NOTE: NOTE: be sure to use the part number listed in the parts list. FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, PARTS MARKED "PT" ARE NOT USED. REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 51: Printed Circuit Board

    12 Printed Circuit Board 12.1. FRONT P.C.B. FRONT P.C.B. LSEP8363B1 NV-GS80EG/EF/E/EP/EB/EK/EE NOTE: NOTE: FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. REFER TO BEGINNING OF SCHEMATIC SECTION. FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, LSEP8363C1 NV-GS85EE/GC, NV-GS88GK PLEASE REFER TO THE SCHEMATIC DIAGRAM AND PARTS LIST.

  • Page 52: Lcd Backlight P.c.b

    12.2. LCD BACKLIGHT P.C.B. LCD BACKLIGHT P.C.B. LSEP8367A1 NOTE: NOTE: NOTE: FOR SCHEMATIC DIAGRAM AND CIRCUIT BOARD LAYOUT NOTES, ALL INDIVIDUAL PARTS EXCEPT D8102, D8104, D8107, D8109 AND D8111 CIRCUIT BOARD LAYOUT SHOWS COMPONENTS INSTALLED FOR VARIOUS MODELS. FOR PROPER PARTS CONTENT FOR THE MODEL YOU ARE SERVICING, REFER TO BEGINNING OF SCHEMATIC SECTION.

  • Page 53: Exploded Views

    13 Exploded Views 13.1. MAIN PARTS SECTION Note: MAIN PARTS SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2.

  • Page 54: Front And Bottom Case Section

    13.2. FRONT AND BOTTOM CASE SECTION Note: FRONT AND BOTTOM CASE SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2.

  • Page 55: Side R Shaft Unit And Lcd Section

    13.3. SIDE R SHAFT UNIT AND LCD SECTION Note: SIDE R SHAFT UNIT AND LCD SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list.

  • Page 56: Ccd And Lens Section

    13.4. CCD AND LENS SECTION CCD AND LENS SECTION Note: 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2.

  • Page 57: Evf Section

    13.5. EVF SECTION Note: EVF SECTION 1. Parts with no Ref. No. in "EXPLODED VIEW" are not supplied. And some Ref. No. will be skipped. Be sure to make your orders of replacement parts according to the parts list. 2. The parts indicated by the dotted line are for Ass'y only and are not supplied.

  • Page 58: Mechanism Section

    13.6. MECHANISM SECTION MECHANISM SECTION NOTE 1 NOTE 1 NOTE 1 : When replacing the Main Chassis Unit (Ref. No. 201) or Cylinder Unit (Ref. No. 202), be sure to perform the Envelope Output Adjustment. Refer to "ENVELOPE OUTPUT ADJUSTMENT" in Mechanical Adjustment.

  • Page 59: Packing Parts And Accessories Section

    13.7. PACKING PARTS AND ACCESSORIES SECTION PACKING PARTS AND ACCESSORIES SECTION IMPORTANT SAFTY NOTICE: COMPONENTS IDENTIFIED BY THE SIGN HAVE SPECIAL CHARACTERISTICS IMPORTANT FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS, USE ONLY THE SPECIFIED PARTS. not supplied (NV-GS85EE-S/GC-S, NV-GS88GK-S) not supplied (NV-GS80EB-S, NV-GS85GC-S)

  • Page 60: Replacement Parts Lists

    1. Parts with mark "SPC" in the Remarks column are supplied from Spare Parts Center of Panasonic AVC 2. IMPORTANT SAFETY NOTICE Company. Components identified by the sign have special 2.

  • Page 61: Electrical Replacement Parts List

    Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks L6HA66NB0008 FOCUS MOTOR UNIT LSEP8361P1 MAIN P.C.B. 80EG/EF LSGQ0223 GRIP BELT /E/EP/E VPF1129 POLY BAG LSPG2339 PACKING CASE,PAPER 80EG/EF LSEP8361R1 MAIN P.C.B. /E/EP/E 80EK/EE B/EK LSEP8361Q1 MAIN P.C.B.
  • Page 62 RESISTORS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks LSEP8363B1 FRONT P.C.B. 80EG/EF R4802 ERJ3GEYJ472V MGF CHIP 1/16W 4.7K /E/EP/E R4803 ERJ3GEYJ223V MGF CHIP 1/16W 22K B/EK/EE R4804 ERJ3GEYJ333V MGF CHIP 1/16W 33K LSEP8363C1 FRONT P.C.B.
  • Page 63 COILS CAPACITORS Ref. Part No. Part Name & Description Remarks Ref. Part No. Part Name & Description Remarks L7801 G1C100KA0055 COIL CHIP 10UH C8104 ECJ1VC1H390J C CHIP 50V 39PF C8105 ECJ1VC1H390J C CHIP 50V 39PF FPC CONNECTOR C8106 ECJ1VC1H390J C CHIP 50V 39PF Ref.

  • Page 64: Voltage Chart

    15 Voltage Chart MAIN P.C.B. MODE MODE MODE MODE MODE MODE MODE PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. PIN NO. FP11 -0.7 FP72 FP61 FP21 FP24 FP81 FP31 -0.2 -0.2 -6.1 -6.1 11.9 FP71 FP22 FP41 FP91...

This manual is also suitable for:

Nv-gs80ee nv-gs80efNv-gs80eg nv-gs80ekNv-gs80ep nv-gs85eeNv-gs85gc nv-gs88gk

Table of Contents