Page 1
Operating and installation instructions Ceramic hobs with induction To avoid the risk of accidents or damage to the appliance it is essential to read these instructions before it is installed and used for the first time. en-GB M.-Nr. 09 055 450...
Contents Warning and Safety instructions Caring for the environment Guide to the appliance Before using for the first time Induction Tips on saving energy Settings Operation Safety features Cleaning and care...
Page 3
Contents Problem solving guide Optional accessories Safety instructions for installation Safety distances Installation notes Building-in dimensions Installing several ProLine elements Installation Electrical connection After sales service Product data sheets...
Page 16
Guide to the appliance CS 1222 Indicators ...
Page 17
Guide to the appliance Control symbols Symbol Description 1 – 9 Display Symbol Description / Cooking zones CS 1212-1 / CS 1212-2 Cooking zone Ø in cm* Rating in watts for 230 V** ...
Page 18
Guide to the appliance CS 1221-1 Ø in cm* Rating in watts for 230 V** Cooking zone CS 1222 Ø in cm* Rating in watts for 230 V** ...
Page 19
Before using for the first time Switching on the hob for the first time Cleaning the hob for the first time ...
Operation Cooking zone controls Switching off turned past B I or B I/II t o 0. Switching on Residual heat indicator ...
Page 26
Operation Auto heat-up Continued cook- Heat-up time ing level [min:sec] Activating clockwise and hold until set within 5 seconds of activating Aut will appear in Deactivating S...
Page 27
Operation Booster for a maximum of 10 minut duced power level and and ...
Page 28
Operation To switch on the Booster To switch off the Booster / Twin- Booster S wise past 9 t o 9. play, the “B” Boost To switch on the TwinBooster, level 1 wise past 9 t o 9. play, the “B” Boost To switch on the TwinBooster, level 2 ...
Page 29
Operation Setting the keeping warm function Keeping warm ...
Problem solving guide Problem Cause and remedy The cooking zones do C not heat up. A smell and vapours are given off when the new appliance is being used. is flashing in a cook- ing zone display. ...
Page 36
Problem solving guide Problem Cause and remedy flashes alternately with in a cooking zone e than 3 minut display. The cooking zone has switched off automatically. S appears in the cook- ing zone display. S appears in the display for several seconds ...
Safety distances Safety distance above the Pro- Line element mm must be maintained.
Page 40
Safety distances Safety distances to the sides and back of the hob Minimum distance between the back 50 mm Minimum distance between the right left 40 mm CS 1212-2 50 mm 100 mm 150 mm 200 mm 250 mm...
Page 41
Safety distances Minimum safety distances un- Interim shelf derneath the hob eave a gap of 10 mm at the back of shelf of 20 mm t oven 15 mm interim shelf 15 mm drawer 75 mm...
Page 42
Safety distances Safety distance when installing the appliance near a wall with additional niche cladding 50 mm - 15 mm = minimum safety distance of 35 mm combustible erials 50 mm non-combustible erials 50 mm - dimension x...
Installing several ProLine elements oLine element width less 8 mm oLine element width less 8 mm...
Page 47
Installing several ProLine elements Calculating the worktop cut-out left by 8 mm on each side. act 16 mm fr 288 mm + 288 mm + 380 mm = 956 mm - 16 mm = 940 mm e 288 mm, 380 mm or 576 mm wide depending on Spacer bars Installation with a downdraft extractor...
Installation Preparing the worktop Wooden worktops S osition the spring clamps spacer bars S e the spring clamps spacer bars with the 3.5 x 25 mm...
Page 49
Installation Natural stone worktops edges of the spring clamps the spacer bars Then fill gap bar Stick the tape osition the spring clamps spacer bars ...
Page 50
Installation Installing several ProLine elements Installation with a downdraft extractor Fitting the ProLine element S S ≤ R4) can be car...
Page 51
Installation Connecting the ProLine ele- ment C C Removing a ProLine element ...
Electrical connection Total power rating Connection Residual current device...
Page 53
Electrical connection Disconnecting from the mains Replacing the power cable special connection cable, type H 05 VV Safety fuses C Automatic circuit breakers Built-in circuit breakers C Residual current device (RCD) S...
Product data sheets Information for domestic electric hobs MIELE Model name/identifier 1. = Ø 100-160 mm 2. = Ø 160-230 mm 1. = 185,2 Wh/kg 2. = 168,9 Wh/kg 177,1 Wh/kg Information for domestic electric hobs MIELE Model name/identifier 1. = Ø 180-300 mm 1. = 170,3 Wh/kg...
Page 56
Product data sheets Information for domestic electric hobs MIELE Model name/identifier 1. = Ø 100-160 mm 2. = Ø 200 / 200x300 mm 1. = 185,2 Wh/kg 2. = 188,7 Wh/kg 187,0 Wh/kg...