Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for AEG L 98485 FL
Summary of Contents for AEG L 98485 FL
- Page 1 L 98685 FL WASHING MACHINE USER MANUAL L 98485 FL...
-
Page 2: Table Of Contents
CONTENTS 4 SAFETY INFORMATION 6 ENVIRONMENT CONCERNS 6 TECHNICAL INFORMATION 7 PRODUCT DESCRIPTION 7 INTERIOR ACCESSORIES 8 CONTROL PANEL 13 WASHING PROGRAMMES 18 BEFORE FIRST USE 19 USING THE APPLIANCE 19 ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME 19 LOADING THE LAUNDRY 20 USING THE DETERGENT AND ADDITIVES 23 STARTING A PROGRAMME 23 AT THE END OF PROGRAMME... - Page 3 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it.
-
Page 4: Safety Information
SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property • To help the environment • For the correct operation of the appli- ance. Always keep these instructions with the appliance also if you move or give it to a different person. -
Page 5: Water Connection
To replace the internal lamp, con- tact the service centre. Disconnect the mains plug from the mains socket before the re- placement of the internal lamp. INSTALLATION • The appliance is heavy, be careful when you move it. • Do not transport your appliance with- out the transit bolts, you can damage internal components and cause leak- ages or malfunctions. -
Page 6: Environment Concerns
ENVIRONMENT CONCERNS PACKAGING MATERIALS Recycle the materials with the symbol Put the packaging in applicable contain- ers to recycle it. ECOLOGICAL HINTS To help the environment, use less water and energy, obey these instructions: • Set a programme without the prewash phase to wash laundry with normal soil. -
Page 7: Product Description
PRODUCT DESCRIPTION Worktop Detergent dispenser Control panel Door handle Internal lamp Rating plate Drain pump INTERIOR ACCESSORIES Spanner To remove the transit bolts. Plastic caps To close the holes on the rear side of the cabinet after the removal of the transit bolts. -
Page 8: Control Panel
CONTROL PANEL Glätten Auffrischen Energiesparen Super Eco 20Min. - 3kg Jeans Spülen Schleudern/ Pumpen Auto Off Auto Off button Programme knob Display Dampf touch button Memory touch buttons Start/Pause touch button Zeitvorwahl touch button Zeit Sparen touch button Extra Spülen touch button Flecken/Vorwäsche/Einweichen touch button Spin reduction touch button (U./Min.) - Page 9 DISPLAY The text bar: • Guides you in the use of the appliance. • Shows the programme status and phase. • Shows alarm messages. Refer to 'Troubleshooting' . The symbols appear on the display when the related phase or function is set. Child lock Door locked You cannot open the door when the symbol is on.
- Page 10 • The time of delay – When you set the delayed start the time of the programme end in- creases by steps of 30 minutes till 10 hours and by steps of one hour till 20 hours. • The end of the programme The display shows a zero.
- Page 11 Rinse hold 1) Only available for Spin/Drain programme. The default temperature of the programme. Cold wash DAMPF BUTTON Touch button to set the steam level. This is possible only with programmes where the steam function is available. The duration of the steam phase changes ac- cordingly to your selection.
-
Page 12: Acoustic Signals
The appliance soaks the laundry at 30°C for about half an hour before to wash. SPIN BUTTON Touch button • Decrease the maximum speed of the spin phase of the programme. The display shows only the spin speeds available with the set pro- gramme. -
Page 13: Washing Programmes
WASHING PROGRAMMES Programme Koch/Bunt Extra Leise Pflegeleicht Leichtbügeln Temperature Type of load Weight of load 95° - Cold White and col- oured cotton with heavy level of soil. Maximum load 8 95° - Cold White and col- oured cotton with normal level of soil. - Page 14 Programme Feinwäsche Wolle / Seide Daunen Anti-Allergie Schleudern / Pumpen Temperature Type of load Weight of load 40° - Cold Delicate fabrics Rinses as acrylics, vis- Short spin cose, polyester items with nor- mal soil. Maximum load 4 40° - Cold Machine washa- Rinses ble wool as well...
- Page 15 Programme Temperature Type of load Spülen 0° Jeans 60° - Cold 20 min. - 3 kg 40° or 30° Super Eco 0° Energiespa- 60° or 40° STANDARD PRO- GRAMMES for the Energy Label con- sumption val- 1) Not available with temperature lower than 40°C. 2) If you use liquid detergent, set a programme without PREWASH.
-
Page 16: Consumption Values
5) The default spin speed is for cotton items. Set the spin speed applicable with your laundry. 6) If you select this function the appliance performs only a drain phase. 7) Press button to add rinses. With a low spin speed the appliance performs delicate rinses and a short spin. - Page 17 Programme Cotton 40 °C economy The cotton 60 °C economy and cotton 40 °C economy are the standard cotton programmes for normally soiled cotton laundry. They are suitable to clean normally soiled cotton laundry and they are the most efficient programmes in terms of combined energy and water consumption for washing that type of cotton laundry.
-
Page 18: Before First Use
BEFORE FIRST USE To activate the drain system, put 2 li- tre of water in the main wash com- partment of the detergent dispenser. Put a small quantity of detergent in the main wash compartment of the detergent dispenser. Set and start a programme for cotton at the highest temperature without laundry. -
Page 19: Using The Appliance
USING THE APPLIANCE Open the water tap. ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME For a correct operation of the weight sensor, activate the appliance and set the programme BEFORE you put the laundry in the drum. Press button ance. Turn the programme knob ( the necessary programme or touch one of the buttons... -
Page 20: Using The Detergent And Additives
USING THE DETERGENT AND ADDITIVES Always obey the instructions that you find on the packaging of the deter- gent products. The detergent compartment for the prewash phase and the soak programme. Add the detergent for prewash and soak before the start of the programme. -
Page 21: Check The Position Of The Flap
Check the position of the flap Measure out the detergent and the fabric conditioner. Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer. SET THE DELAY START Touch button again and again to set the desired delayed start. - Page 22 You cannot set the delay start with the Steam programme.
-
Page 23: Starting A Programme
STARTING A PROGRAMME Touch button gramme. The indicator of button stops to flash and is on with red col- our. If a delayed start is set, the appliance starts the countdown. The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces-... - Page 24 Remove the laundry from the appli- ance. Make sure that the drum is empty. Keep the door ajar, to prevent mil- dew and odours. Close the water tap. The washing programme is completed, but there is water in the drum: –...
-
Page 25: Helpful Hints And Tips
HELPFUL HINTS AND TIPS THE LAUNDRY LOAD • Divide the laundry in: white, coloured, synthetics, delicates and wool. • Obey the washing instructions that are on the laundry care labels. • Do not wash together white and col- oured items. •... - Page 26 Level medium very hard Type °dH 8-14 hard 15-21 > 21 Water hardness °T.H. mmol/l 16-25 1.6-2.5 26-37 2.6-3.7 > 37 >3.7 Clarke 10-16 17-25 >25...
-
Page 27: Care And Cleaning
CARE AND CLEANING WARNING! Disconnect the appliance from the mains supply before you clean it. DESCALING The water we use contains limescale. If it becomes necessary, use a water softener to remove limescales. Use a special product made for washing machines. -
Page 28: Detergent Dispenser
DETERGENT DISPENSER To clean the dispenser: DRAIN PUMP Regularly examine the drain pump and make sure that it is clean. Clean the pump if: • The appliance does not drain the water. • The drum cannot turn. • The appliance makes an unusual noise because of the blockage of the drain pump. - Page 29 To clean the drain pump: Open the drain pump door. Pull the flap out to remove it. Put a container below the recess of the drain pump to collect the water that flows out. Press the two levers and pull forward the drainage duct to let the water flow out.
-
Page 30: Emergency Drain
THE INLET HOSE FILTER AND THE VALVE FILTER It could be necessary to clean the filters when: • The appliance does not fill with water. • The appliance fills with the water for a long time. To clean the water inlet filters: 20°... -
Page 31: Frost Precautions
Put 2 litres of water in the main wash compartment of the detergent dis- penser. Start the programme to drain the wa- ter. FROST PRECAUTIONS If the appliance is installed in an area where the temperature can be less than 0 °C, remove the remaining water from the inlet hose and the drain pump. -
Page 32: Troubleshooting
TROUBLESHOOTING The start of the appliance does not occur or it stops during operation. Try to find a solution to the problem be- fore you contact the service centre (refer to the table). With some problems, the acoustic sig- nals operate and the display shows an alarm message. - Page 33 PROBLEM WITHOUT ALARM MESSAGE Problem Possible cause The appliance A washing programme does not drain without the drain phase the water. is set. The function Rinse Hold is on. The spin phase The spin phase is off. does not operate. The filter of the drain pump is blocked.
- Page 34 Problem The appliance fills with water and drain immediate- The washing re- sults are not satis- factory. The internal lamp is off. After a steam programme, gar- ments are partial- ly wet. After a steam programme, gar- ments are not suf- ficiently smooth.
-
Page 35: Installation
INSTALLATION UNPACKING Use the gloves. Remove the external film. If necessary, use a cutter. Remove the cardboard top. Remove the polystyrene packaging materials. Remove the internal film. Open the door. Remove the polystyr- ene piece from the door seal and all the items from the drum. - Page 36 Put one of the polystyrene packaging elements on the floor behind the ap- pliance. Carefully put down the appli- ance with the rear side on it. Make sure not to damage the hoses. Remove the polystyrene protection from the bottom. Pull up the appliance in vertical posi- tion.
-
Page 37: Positioning And Levelling
WARNING! Remove all the packaging and the transit bolts before you install the appliance. POSITIONING AND LEVELLING CAUTION! Do not put cardboard, wood or equivalent materials below the appliance feet to adjust the level. Put the plastic caps in the holes. You can find these caps in the user man- ual bag. -
Page 38: Water Drainage
THE INLET HOSE Do not use an extension hose if the inlet hose is too short. Contact the service centre for the replace- ment of the inlet hose. Water-stop device WATER DRAINAGE There are different procedures to connect the drain hose: •... - Page 39 With the plastic hose guide. Without the plastic hose guide. • On the edge of a sink. • Make sure that the plastic guide cannot move when the appliance drains. At- tach the guide to the water tap or the wall.
- Page 40 You can extend the drain hose to maximum 400 cm. Contact the service centre for the other drain hose and the extension.
- Page 41 ENGLISH...
- Page 43 ENGLISH...
- Page 44 132940553-B-382011...