2 − Features of the CD-RW900
Front panel
1
e
The power switch is used to
POWER switch
1
switch the unit on and off.
Discs should be placed label side
Disc tray
2
upwards in the disc tray. When a disc is loaded
into the unit, the display shows
a short period while the unit determines the con-
tents of the disc.
Use this key to call up the menu op-
MENU key
3
tions (see "Operation basics" on page 15).
OPEN/CLOSE key
4
close the disc tray. The display shows
the tray is opening and
closing.
Use this key to set the repeat play-
REPEAT key
5
back mode on and off.
When in a menu mode, this key
ESCAPE key
6
cancels the menu item selected.
Use this key to see the current disc
DISPLAY key
7
title when the disc is stopped. When the disc is
playing or in ready mode, press this key to see the
current track title.
This is not a control, but the
REMOTE SENSOR
8
sensor for the remote control unit. When using
the remote control unit, make sure that there is a
clear path from the remote control unit to the sen-
sor.
Use this key to cycle through the time
TIME key
9
modes shown on the display (see "Time display
switching" on page 19).
The display is used to show the current
Display
0
status of the unit, as well as the current menu set-
tings.
10
TASCAM CD-RW900
2
3
4
r t y u i o p a s
for
TOC Reading
Use this key to open and
when
Open
when the tray is
Close
5
6
7 8
9
TIMER switch (PLAY, OFF)
q
switches Timer play on and off. See "Timer play-
back" on page 19 for details.
INPUT (L,R) controls
w
trols to adjust the level of the analog audio signals
received at the ANALOG IN jacks.
PHONES jack and the level control
e
dard pair of stereo headphones, equipped with a
1/4-inch plug, with this jack.
Adjust the volume from the jack with the level
control (turn clockwise for higher volume).
MULTI JOG dial
r
playback, to set parameter values.
In addition, pushing the dial acts like an
key, i.e. the currently-displayed value or setting is
confirmed.
FINALIZE/INS key
t
cordable discs. (see "Finalizing" on page 28 for
details).
It also acts like a space key when entering TEXT
data (see "Title input operation" on page 30).
ERASE/DEL key
y
discs only) to erase tracks, or a whole disc, or to
refresh a "bad" disc, or to unfinalize a finalized
disc. See "Erasing" on page 29 for details.
It also acts like a delete key when entering TEXT
data (see "Title input operation" on page 30).
Use this key to operate review play-
∆/˙ key
u
back (search) while in playback or ready modes.
When Directory search is on, and when stopped,
using this key selects the directory.
It also moves the cursor in the left direction when
entering TEXT data.
0
q w
d f
g
Using this key
Use these concentric con-
Use a stan-
Use this dial to select tracks for
ENTER
Use this key to finalize re-
Use this key (with CD-RW