Table of Contents
Advertisement
Table 11. System setup options—Power Management menu
Power Management
Battery Configuration
Enable Advanced Battery Charge
Configuration
Enable Peak Shift
Thermal Management
Enable USB Wake Support
Enable on Dell USB-C Dock
Block Sleep
Lid Switch
Enable Lid Switch
Power On Lid Open
Intel Speed Shift Technology
Table 12. System setup options—Security menu
Security
TPM 2.0 Security
TPM 2.0 Security On
PPI Bypass for Enable Commands
72
System setup
Enables the computer to run on battery during peak power usage hours. Use
the below options to prevent AC power usage between certain times of each
day.
Default: Adaptive. Battery settings are adaptively optimized based on your
typical battery usage pattern.
Enables Advanced Battery Charge Configuration from the beginning of the
day to a specified work period. Advanced Battery Charged maximizes battery
health while still supporting heavy use during the work day.
Default: OFF.
Enables the system to run on battery during peak power usage hours.
Default: OFF.
Allows for cooling fan and processor heat management to adjust system
performance, noise, and temperature.
Default: Optimized.
Enables the USB devices to wake the computer from Standby mode, Hibernate
and Power Off.
Default: OFF.
Enables the Dell USB-C Dock when connected to wake the computer from
Standby mode, Hibernate and Power Off.
Default: ON.
Blocks the computer from entering Sleep (S3) mode in the operating system.
Default: OFF.
If enabled, the computer will not go to sleep, Intel Rapid Start will
NOTE:
be disabled automatically, and the operating system power option will be
blank if it was set to Sleep.
Enables or disables lid switch.
Default: ON.
Enables the computer to power up from the off state whenever the lid is
opened.
Default: ON.
Enables or disables Intel Speed Shift Technology support which enables
the operating system to select the appropriate processor performance
automatically.
Default: ON.
Enable or disable TPM 2.0 security options.
By default, the TPM 2.0 Security On option is enabled.
Allows the OS to skip BIOS PPI user prompts when issuing TPM PPI enable
and activate commands.
Hide quick links:
Advertisement
Table of Contents
