Table of Contents
Advertisement
About this task
The following image indicates the location of the 3-cell (41 Wh) battery and provides a visual representation of the installation
procedure.
Steps
1. Using the alignment posts, place the 3-cell battery on the palm-rest and keyboard assembly.
2. Align the screw holes on the 3-cell battery with the screw holes on the palm-rest and keyboard assembly.
3. Replace the three (M2x3) screws that secure the 3-cell battery to the palm-rest and keyboard assembly.
4. Connect the battery cable to the system board.
5. Adhere the tape that secures the battery cable to the system board.
Next steps
1. Install the
base
cover.
2. Follow the procedure in
Removing the 4-cell battery
Prerequisites
1. Follow the procedure in
2. Remove the
base
cover.
About this task
The following image indicates the location of the 4-cell (54 Wh) battery and provides a visual representation of the removal
procedure.
18
Removing and installing components
After working on your
computer.
Before working inside your
computer.
Hide quick links:
Advertisement
Table of Contents
