Table of Contents
Advertisement
Available languages
Available languages
12
Vibration levels, a
hveq
2
Right handle, m/s
2
Left handle, m/s
Saw blade
Blade type
Material
Max. blade size, mm/in
Max. cut depth, mm/in
Cutting distance from wall, mm/in
Blade rotation
Blade shaft speed, rpm
Blade depth control
13
Average cutting rate
Soft aggregates, m/min / ft/min
Medium aggregates, m/min / ft/min
Hard aggregates, m/min / ft/min
Recommended dust extractors
3
Min. Air flow m
/h or CFM
Min. Vaccum, KPa/psi
Min. Water lift, m/in
Dust extractor attachment, mm/in
Noise and vibration declaration
statement
These declared values were obtained by laboratory
type testing in accordance with the stated directive or
standards and are suitable for comparison with the
declared values of other products tested in accordance
with the same directive or standards. These declared
values are not suitable for use in risk assessments
and values measured in individual work places may
be higher. The actual exposure values and risk of
harm experienced by an individual user are unique and
depend upon the way the user works, in what material
12
Vibration level according to EN 13862. Reported data for vibration level has a typical statistical dispersion
(standard deviation) of 1.5 m/s
13
Estimate only. Speed will vary with job conditions and concrete mixes.
14
Technical data for dust extractors are not conclusively describing actual performance over time between
different dust extractors. For Husqvarna products OSHA objective data are available at www.husqvar-
nacp.com/us.
794 - 001 - 19.04.2022
Soff-Cut 4000
2.7
3.8
Diamond blade, dry cut with tri-arbor
Green concrete only
343/13.5
76/3
89/3 ½
Counterclockwise, upcutting
3600
Manual
76 mm (3 inch) depth
4.3/14
3.4/11
2.1/7
14
400 or 236
22/3.6
2.3/90
76/3
2
.
51 mm (2 inch) depth
7.3/24
5.2/17
2.7/9
the product is used, as well as upon the exposure time
and the physical condition of the user, and the condition
of the product.
71
Advertisement
Chapters
Table of Contents
