Tascam DP-01 Quick Start Manual

Hide thumbs Also See for DP-01:

Download this manual

DP-01 • DP-01FX • DP-01FX/CD

•

Connect powered speakers or an amplifier to the LINE OUT.

•

Connect your audio source into MIC IN, or LINE/GUITAR IN L preferably

something that will continue playing like a CD player, Tape Deck, Tape out or

Record out from a stereo receiver.

•

Move all the faders up to the grey line.

•

Press and hold down the ASSIGN A button (the light should be blinking)

simultaneously press the REC button above channel number 1 (the light should

be blinking). Both lights should be blinking together

•

Release the ASSIGN A and the REC button

•

Press the REC button above channel 1 (the light should be blinking by itself)

•

You should see the meters moving with in the display above Input A and Track

•

Press the REWIND BUTTON twice until the display reads ABS 00.00.00.00

•

Press and hold the RECORD button and simultaneously press the PLAY button

the REC light above channel one, the PLAY light and the RECORD light should

become solid.

•

After recording press the STOP button. Press the REWIND button twice until the

display reads ABS 00.00.00.00

•

Press the PLAY button.

You should hear what you recorded.

RECORDING A TRACK

Page 1 DP-01 • DP-01FX • DP-01FX/CD RECORDING A TRACK • Connect powered speakers or an amplifier to the LINE OUT. • Connect your audio source into MIC IN, or LINE/GUITAR IN L preferably something that will continue playing like a CD player, Tape Deck, Tape out or Record out from a stereo receiver.
Page 2 To record to other tracks: • Press and hold down the ASSIGN A button (the light should be blinking) simultaneously press the REC button above new channel number (the light should be blinking). Both lights should be blinking together • Release the ASSIGN A and the REC button •...
Page 3 MASTERING • Use the channel faders to set the level for each track. • Turn the PAN knobs to adjust the stereo position for each track. • Use the EQ HIGH and EQ LOW knobs to adjust the tone of each track. •...
Page 4 EXPORTING A MASTER TO A PC OR MAC Do not connect the USB cable to the computer until instructed to. Transferring files to the FAT partition: Tracks have to be transferred to the Fat partition so that it can be read by the computer. •...
Page 5 USB Open and Close: The DP-01 has to be in USB OPEN so that the computer can access the FAT partition. While the system is in USB OPEN, you cannot perform any operations involving the DP- 01 hard disk (recording, playback, REW, FFW etc.) •...

Dp-01fx Dp-01fx/cd