Table of Contents
Advertisement
D&N Auto Mode:
Select Auto so that the camera can automatically switch between day (color) and night
(black and white) mode.
1. DELAY
2. D→N(AGC)
3. N→D(AGC)
4. RETURN
Delay: This is the time in seconds before Day↔Night switches. A long delay
1.
response would be used, for example, to avoid switching from Night to Day
mode when car headlights pass in front of the camera. The values range from
0-15.
2.
Day→Night: Set the threshold level on how dark it should be before switching
from Day to Night mode. Lower (Higher) value makes the camera switched
from Day to Night at lower (higher) illumination. The values range from 16-176.
3.
Night→Day: Set the threshold level on how light it should be before switching
from Night to Day mode. The values range from 0-160.
D&N BW mode: Select BW to manually set the camera to black and white mode
1. BRUST
2.
RETURN
1.
Burst: Enable/disable the color burst component of the video signal when the
camera switches to B/W.
a.
b.
2.
COLOR mode: Select Color to manually set the camera to color (day) mode.
SET IMAGE NOISE REDUCTION
Smart 3DNR noise reduction reduces the background noise in a low luminance
environment with 2D + 3D filtering system.
D & N AUTO
5
150
RET↵
D&N BW
OFF
RET↵
ON mode maintains the same color signal in B/W so that the video
signal provides better compatibility with certain color equipment.
OFF mode removes the color burst signal B/W video and increase
the total TV lines.
20
10
Advertisement
Table of Contents
