Related Manuals for Beko DIT48530
Summary of Contents for Beko DIT48530
- Page 1 Dishwasher User’s Manual Document Number : 18 7463 0100_AA_BEKO_E9_EN/ 05-07-19.(9:06)
- Page 2 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
- Page 3 Dishwasher User’s Manual Document Number : 18 7463 0100_AA_BEKO_E9_EN/ 05-07-19.(9:06)
- Page 4 Please read this user manual first! Dear Customer, We hope that you get the best results from your product which has been manufactured with high quality and state-of-the-art technology. Therefore, please read this entire user manual and all other accompanying documents carefully before using the product and keep it as a reference for future use.
-
Page 5: Table Of Contents
CONTENTS 1 INSTRUCTIONS FOR SAFETY Lower basket multipurpose / height adjustable service rack ..... 23 AND ENVIRONMENT Lower basket bottle wire ....24 General safety ........4 Upper basket height adjustable rack 24 Intended use ..........4 Upper basket multipurpose service Children’s safety ........5 rack ............ -
Page 6: Instructions For Safety And Environment
instructions for safety and environment This section contains safety Never touch the plug with • instructions that will help to get wet hands! Never unplug by protected from risk of personal pulling on the cable, always injury or property damage. Failure pull out by grabbing the plug. -
Page 7: Children's Safety
instructions for safety and environment Children’s safety This appliance is intended • to be used in household and Electrical products are • similar applications such as: dangerous for the children. - Staff kitchen areas in shops, Keep children away from the offices and other working product when it is in use. -
Page 8: Compliance With Weee Directive And Disposing Of The Waste Product
instructions for safety and environment Package information 1. Unplug the product before transporting it. Packaging materials of the 2. Remove water drainage and product are manufactured water supply connections. from recyclable materials in accordance with our National 3. Drain the remaining water in Environment Regulations. -
Page 9: Dishwasher Overview
Dishwasher Overview 1. Upper basket 2. Upper impeller 3. Lower impeller 4. Silverware basket 5. Door 6. Rating Label 7. Control panel 8. Detergent dispenser 9. Lower basket 10. Filters 11. Salt reservoir lid 12. Upper basket rail 13. Upper cutlery basket (depends on model) 14. -
Page 10: Fan Drying System
Dishwasher Technical specifications Compliance to standards and test data / EC declaration of conformity This product complies with the following EU directives; Development, production and sales stages of this product comply with the safety rules included in all pertaining European Community regulations. 2014/35/EU, 2014/30/EU, 93/68/EC, IEC 60436/DIN 44990, EN 50242 Power input 220-240 V, 50 Hz (see rating label) -
Page 11: Installation
Installation Appropriate installation Refer to the nearest Authorised Service Agent for installation of your product. To location make the product ready for use, make sure Place the product on a solid and flat • that the electricity, tap water supply and floor that has sufficient load carrying water drainage systems are appropriate capacity! The product must be... -
Page 12: Connection To The Drain
Installation Permitted water temperature: up must be min. 50 cm and max. 100 cm from to 25°C the floor. A discharge hose longer than 4 The dishwasher may not be connected to meters causes dirty washing. open warm water devices or flow-through Attach the water discharge hose to the water heaters. -
Page 13: Aquasafe
Installation Aquasafe+ The voltage and allowed fuse or breaker • protection are specified in the “Technical (depends on model) specifications” section. If the current The Aquasafe+ system protects against value of the fuse or breaker in the house water leaks that may occur at the hose is less than 16 Amps, have a qualified inlet.Water contact with the valve box of electrician install a 16 Amp fuse. -
Page 14: Preparation Tips For Energy Saving
Preparation Tips for energy saving Adjusting the water softening system Following information will help you use the product in an ecological and energy- Cleaning, rinsing and drying performance of efficient manner. your dishwasher will increase when water Wipe away any coarse food remnants on softening system is adjusted properly. - Page 15 Preparation Remove the test Turn on the tap and Hold the test strip in Remove the test Wait for 1 minute. The test strip shows strip from the let the water run for the water for about strip from the water you the hardness packet.
-
Page 16: Adding Salt
Preparation If the hardness level of the supply water It is recommended to use is above 90 °dF or if you are using well granule- or powder-formed water, then it is recommended to use water softening salts in the water purification devices and special filters. -
Page 17: Detergent
Preparation Adding detergent You can put about 2 kg of softening salt into the salt Pay attention to the warnings reservoir. on the detergent packaging to get better washing and 5. Replace the lid and tighten it when the drying results. Contact the reservoir is full. -
Page 18: Tablet Detergents
Preparation Tablet detergents In addition to the conventional tablet detergents, there are also commercially available detergent tablets that show water softening salt and/or rinse aid effect. Some types of these detergents contain special- purpose components such as glass and stainless steel protectors. These tablets show their effects up to a certain water 3. -
Page 19: Rinse Aid
Preparation When you switch to powder 2. Fill the reservoir until “MAX” level. detergent from tablet detergent: Make sure that salt and rinse aid reservoirs are full. 2. Set the water hardness to the highest level and perform an empty run. 3. -
Page 20: Items Not Suitable For Washing In The Dishwasher
Preparation Items not suitable for Place the hollowed dishes such as • bowls, glasses and pans upside down washing in the dishwasher in the dishwasher. Thus, accumulation Never wash dishes soiled by cigarette • of water in deep hollows is prevented. ash, candle remnants, polish, dyestuff, To prevent possible injuries, chemicals, etc. - Page 21 Preparation Suggestions for loading the dishwasher Improper Loading Of Dishware Lower basket Upper basket Improper Loading Of Dishware Dishwasher / User’s Manual 19 / 45 EN...
-
Page 22: Cutlery Basket
Preparation Cutlery basket Cutlery basket (depends on model) (depends on model) Cutlery basket is designed to wash your Cutlery basket is designed to wash your dishes such as knife, fork, spoon, etc. in an dishes such as knife, fork, spoon, etc. in an efficient manner. -
Page 23: Collapsible Lower Basket Tines
Preparation Collapsible lower basket Bringing the tines to the tines horizontal position by holding them from the tips may cause (depends on model) them to bend. Therefore, it There are foldable tines (A) located at the will be appropriate to bring the tines in the middle to horizontal lower basket of the machine are designed or vertical position by holding... -
Page 24: Tray Wash Supports
Preparation SoftTouch Accessory (depends on model) The SoftTouch Accessory found in the lower basket of your machine enables a safe washing for your fragile glasses. Bringing the tines to the horizontal position by holding them from the tips may cause them to bend. -
Page 25: Lower Basket Multipurpose / Height Adjustable Service Rack
Preparation Lower basket multipurpose Make sure that the impeller / height adjustable service does not touch the dishes you rack placed on the racks. (depends on model) To close the racks: This accessory located at the lower basket Fold the rack (A). of your machine allows you to easily wash 2. -
Page 26: Lower Basket Bottle Wire
Preparation Lower basket bottle wire Upper basket multipurpose service rack (depends on model) The bottle wire is designed for easier (depends on model) washing of long pieces with wide mouths. This accessory located at the upper basket You may take out the bottle wire from the of your machine allows you to easily wash basket when not in use by pulling it out pieces such as extra long ladles and bread... -
Page 27: Adjusting The Height Of The Upper Basket
Preparation Adjusting the height of the To lower the basket, while it is in the uppermost position; upper basket Hold the upper basket wires with both (depends on model) hands, slightly lift up the basket and The upper basket height adjustment simultaneously push and release the mechanism has been designed for you to latches shown in the figure (B). -
Page 28: Collapsible Upper Basket Wires
Preparation Collapsible upper basket Height setting with empty wires basket (depends on model) (depends on model) You can use collapsible wires when you In this model, the height setting of the need a larger space for your dishes in the upper basket may be changed using the upper basket of your machine. -
Page 29: Ceiling Cutlery Basket
Preparation Ceiling cutlery basket (depends on model) Ceiling cutlery basket is designed to wash your cutlery items such as forks, spoons and etc. by placing them between the bars on the basket. When the central tray is in the lower position, you can load long/high items such as coffee cups, ladles, etc. -
Page 30: Operating The Product
Operating the product 7. Function Selection Keys On / Off Key AquaIntense Function 2. Menu Key Fast+ Function 3. Time Delay Selection SteamGloss Function / Menu Direction Selection Keys Super Rinse Function 4. Selection / Confirmation Key 5. Display 8. Programme Selection Keys 6. -
Page 31: Programme Selection / Programme Cancel Key
Operating the product On/Off Key Programme selection When you press the On/Off key, the Press the On/Off button to turn on indicator lights illuminate on the display your machine. for ON position. The lights turn off in OFF 2. Check the Salt and Rinse Aid indicators position. - Page 32 Operating the product /45 EN Dishwasher / User’s Manual...
-
Page 33: Auxiliary Functions
Operating the product Auxiliary functions Super Rinse Function Depending on the type of the detergent Washing programmes of your dishwasher used, if a detergent dissolving issue is are designed to obtain the best cleaning encountered it will remove the resulting effect, considering the type of the soiling, stains from the dishes and enables the soiling degree and properties of the dishes... - Page 34 Operating the product Functions Under the Settings EverClean Function Off/On Menu (depends on the model) Under the settings menu of your product, there are some additional functions that depend on the model. To access these functions, press and hold the Menu key for 3 seconds. Use <- and +>...
- Page 35 Operating the product Interior Lighting (Depends on the model) Some models have interior lighting to illuminate the interior when the door is opened. Changing the interior lighting setting After switching on your machine, press the Menu key for 1 second. 2.
-
Page 36: Scheduling The Washing Time
Operating the product Scheduling the washing the door of the product and wait for the draining process complete. Draining is time completed in 2 minutes and the machine Time Delay gives an audible warning when it is If an economical electricity tariff is applied completed. -
Page 37: Cancelling The Programme
Operating the product Cancelling the programme Adjusting the amount of rinse aid Open the door of the product Press and hold the Programme Selection / Programme After switching on your machine, press Cancel keys for 3 seconds. After the 3 - the Menu key for 1 second. -
Page 38: Water Cut-Off Warning
Operating the product For energy saving, the machine is automatically turned off following the completion of the programme or if the programme is not started. Leave your dishes in the machine for about 15 minutes to allow them cool down after they are washed. -
Page 39: Maintenance And Cleaning
Maintenance and cleaning Cleaning the filters Service life of the product extends and frequently faced problems decrease if it is Clean the filters at least once a week in cleaned at regular intervals. order for the machine operates efficiently. Unplug the product and turn off Check if food residues are left on the filters. -
Page 40: Cleaning The Hose Filter
Maintenance and cleaning Cleaning the hose filter Damages on the machine that may be caused by impurities coming from the urban supply water or your own water installation (such as sand, dirt, rust, etc.) can be prevented by means of the filter attached to the water inlet hose. -
Page 41: Cleaning The Impellers
Maintenance and cleaning Upper impeller Cleaning the impellers Check if the holes on the upper impeller (1) Clean the impellers at least once a week in are clogged. If they are clogged, remove order for the machine operates efficiently. and clean the impeller. Turn its nut to left to Lower impeller remove the upper impeller. -
Page 42: Troubleshooting
Troubleshooting Machine does not start. • Power cable is unplugged. >>> Check if the power cable is plugged in. • Fuse is blown. >>> Check the fuses in your house. • Water is cut. >>> Make sure that the water inlet tap is open. •... - Page 43 Troubleshooting • Rinse aid is not sufficient. >>> Check the rinse aid indicator and add rinse aid if necessary. Increase the rinse aid setting if there is enough amount of rinse aid in the machine. • Machine is unloaded right after the programme is over. >>> Do not unload your machine right after washing process is completed.
- Page 44 Troubleshooting the filling process. Run the prewash programme to remove the salt that spilled inside the machine. Since the salt granules that will remain under the lid will dissolve during prewash, causing the lid loosen, check the lid once again at the end of the programme. There is a different odour in the machine A new machine has a peculiar odour.
- Page 45 Troubleshooting Detergent remains in detergent dispenser. • Detergent dispenser was damp when adding detergent. >>> Make sure that the detergent dispenser is dried well prior to filling it with detergent. • Detergent is added long before the washing process. >>> Pay attention to add detergent shortly before start-up of the washing.
- Page 46 Troubleshooting A smear remains on glasses that resembles milk stain which can not be removed when wiped by hand. A bluish / rainbow appearance occurs when the glass is pointed to light. • Excessive rinse aid is used. >>>Lower rinse aid setting. Clean the spilled rinse aid when adding rinse aid.