Table of Contents
Advertisement
Solution Settings / EZ-Manager Wizard (Cont.)
(Continued from previous page)
Note: With RF configuration, Pro:Centric server data must be present on the RF channel
selected as the TV's Data Channel in order for you to select "NEXT" (you will see a
"Data Channel Found" message below the Signal Quality indicator). With IP configuration,
Pro:Centric server data must be present via the wired LAN cable connection in order for you to
select "NEXT" (you will see a "IP Server Found" message below the IP Port field).
If you opt to initiate a real-time download in the last step, the EZ-Manager Wizard will proceed with
the Pro:Centric application and/or E-Z Installation data downloads (see Processing the Pro:Centric
Configuration screen example on page 29). When the Pro:Centric configuration is complete, an
EZ-Manager Configuration Complete screen (see example on page 29) is displayed, and after 10
seconds, the wizard exits, and the TV turns OFF.
Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn
off or reboot the TV. If desired, select TURN OFF or REBOOT, respectively, and then press OK on
the Installer Remote.
USB Configuration
TV Manager / USB download options enable you to download configuration, image, or software
files from a USB memory device to the TV. You can also use the Ez Download utility available
from the menu to select multiple types of files to be downloaded at one time using one process.
Each of the USB download functions requires that you have the appropriate file(s) loaded on
a USB memory device. If you wish to perform a software update or download image/icon files,
the applicable file(s) must be stored in a folder named "LG_DTV" in the root directory of the USB
memory device. Clone/Configuration (.tlx) files should simply be stored in the root directory of the
USB device.
The procedure below assumes the desired file(s) is/are already loaded onto the USB device. For
further information on the TV Manager / USB download options and file requirements, and/or for
information on creating Clone/Configuration (.tlx) files, refer to the appropriate section(s) in this
document.
Before You Begin
• If you intend to use the Zoning feature(s) on this TV, make sure to set the appropriate TV
Zone # and/or Wi-Fi Zone # in the EZ-Manager's Zones, Label, and Room Number screen
BEFORE continuing with USB Configuration. See "TV Configuration Options" on page 23 for
further information.
• Ensure the USB device to be used has been formatted with FAT format.
• When creating files to be downloaded, avoid using special characters (?, &, @, etc.) in filenames.
• Refer to "Ez Download Utility" on pages 34 to 37 for further information on the Ez Download utility.
• Refer to "Custom Master TV Setup" on pages 49 to 51 for information on creating a Clone (.tlx)
file, and/or refer to "Creating an FTG Configuration File" on pages 59 to 61 for information on
creating an FTG Configuration (.tlx) file for FTG Mode configuration.
• See Reference section, "Downloading Images or Icons using a USB Memory Device," for image
and icon guidelines.
• See Reference section, "Updating TV/PTC Software using a USB Memory Device," for further
information on software updates.
32
206-4354
Advertisement
Table of Contents
