Advertisement
Quick Links
ONE-WAY IP CEILING SPEAKER
INTRODUCTION
The VIP-120 One-Way IP Ceiling Speaker enables
voice access to a single zone of one-way paging
over an IP-based LAN/WAN. This allows a page
zone extension anywhere on the network. The
speaker level is electrically adjusted during set up.
The enclosure is made of steel with a durable white
powder coated finish. Power is provided to the
VIP-120 via a Power over an Ethernet switch
meeting the 802.3af specification.
SPECIFICATIONS
Access Methods
•
PBX, FXO Port w/VIP-811
•
POTS telephone set w/VIP-811
•
PBX, FXS Port w/VIP-821
•
Valcom M Cast Page Group
•
SIP – enabled telephone system
Features
•
RJ-45 network connection
•
802.3af compliant
•
High Efficiency Class-D Amplifier
INSTALLATION
FCC Information
This equipment has been tested and found to
comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference when the equipment is
operated in a commercial environment. This
equipment generates, uses and can radiate radio
frequency energy and if not installed and used in
accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area
may cause harmful interference in which case the
user will be required to correct the interference at
his own expense.
VIP-120
DIMENSIONS/WEIGHT
•
13.00" Dia x 3.00" D
(33.02cm Dia. x 7.62cm D)
•
Weight: 2.5 lbs (1.13 kg)
Environment
Temperature:
Humidity:
Precautionary Designations
CAUTION: To reduce the risk of electric shock,
Refer servicing to qualified serv ice personnel.
Packing List
Qty.
1
1
1
1
0 to 85% non-precipitating
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Do not remove cover.
No user serviceable parts inside.
This symbol indicates that dangerous
voltage constituting a risk of electric
shock is present within this unit.
This symbol indicates that there are
important operating and maintenance
instructions in the literature accompanying
this unit.
Item
VIP-120
VSP Document
RJ-45 Patch Cable
Issue 1
Issue 2
0 to +40° C
947635
Advertisement
Related Manuals for Valcom VIP-120A-SA
Summary of Contents for Valcom VIP-120A-SA
- Page 1 (33.02cm Dia. x 7.62cm D) • POTS telephone set w/VIP-811 • Weight: 2.5 lbs (1.13 kg) • PBX, FXS Port w/VIP-821 • Valcom M Cast Page Group Environment • SIP – enabled telephone system Temperature: 0 to +40° C Features Humidity: 0 to 85% non-precipitating •...
- Page 2 This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or use of the product.