Table of Contents
Related Manuals for LG 77EG979Y.AMF
Summary of Contents for LG 77EG979Y.AMF
- Page 1 T H E U L T I M A T E D I S P L A Y OWNER’S MANUAL Please read this manual carefully before operating your set and retain it for future reference. EC93** EC97** EG97** www.lg.com *MFL68601915* P/NO : MFL68601915 (1512-REV00) Printed in Korea...
-
Page 2: Table Of Contents
TABLE OF CONTENTS TABLE OF CONTENTS LICENSES REmOTE CONTROL OPEN SOURCE SOFTWARE NOTICE mAGIC REmOTE FUNCTIONS INFORmATION Registering Magic Remote How to use magic remote ExTERNAL CONTROL dEvICE Precautions to Take when Using the Magic SETUP Remote USING ThE USER GUIdE SAFETy INSTRUCTIONS - Viewing 3D Imaging mAINTENANCE... -
Page 3: Licenses
LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping, and handling) upon email request to opensource@lge.com. This offer is valid for three (3) years from the date on which you purchased the product. -
Page 4: Safety Instructions
SAFETY INSTRUCTIONS SAFETy INSTRUCTIONS Please read these safety precautions carefully before using the product. WARNING y Do not place the TV and/or remote control in the y Insert power cable plug completely into wall socket following environments: otherwise if not secured completely into socket, fire - A location exposed to direct sunlight ignition may break out. - Page 5 SAFETY INSTRUCTIONS y Do not drop the product or let it fall over when con- y Do not drop metallic objects such as coins, hair necting external devices. pins, chopsticks or wire into the product, or inflam- Otherwise, this may result in injury or damage to the mable objects such as paper and matches.
- Page 6 SAFETY INSTRUCTIONS y If any of the following occur, unplug the product im- y If you install the TV on a stand, you need to take mediately and contact your local service centre. actions to prevent the product from overturning. - The product has been impacted by shock Otherwise, the product may fall over, which may - The product has been damaged...
- Page 7 SAFETY INSTRUCTIONS y Do not place non-rechargeable batteries in charging y Periodically examine the cord of your appliance, device. and if its appearance indicates damage or deteriora- tion, unplug it, discontinue use of the appliance, and y Make sure there are no objects between the remote have the cord replaced with an exact replacement control and its sensor.
- Page 8 SAFETY INSTRUCTIONS y When unplugging the cable, grab the plug and un- y The panel is a high technology display product with plug it, by pulling at the plug. Don’t pull at the cord resolution of two million to six million pixels. You to unplug the power cord from the power board, as may see tiny black dots and/or brightly coloured this could be hazardous.
-
Page 9: Viewing 3D Imaging
Cautions when using the 3d glasses Symptoms which require discontinuation y Make sure to use LG 3D glasses. Otherwise, you or refraining from watching 3d contents may not be able to view 3D videos properly. y Do not use 3D glasses instead of your normal y Do not watch 3D contents when you feel fatigue from glasses, sunglasses or protective goggles. -
Page 10: Installation Procedure
INSTALLATION PROCEDURE / ASSEMBLING AND PREPARING NOTE y Image shown may differ from your TV. y Your TV’s OSD (On Screen Display) may differ slightly from that shown in this manual. y The available menus and options may differ from the input source or product model that you are using. y New features may be added to this TV in the future. - Page 11 ASSEMBLING AND PREPARING Owner’s manual Remote control, magic remote, Cinema 3d glasses batteries (AAA) Batteries (AA) The number of 3D glasses The remote control will not (See p.36) may differ depending on be included for all sales the model or country. market.
-
Page 12: Separate Purchase
Contact your dealer to buy these items. These devices only work with certain models. AG-F*** AN-mR500 AN-vC5** AG-F***dP Cinema 3D Glasses Magic Remote Video call camera Dual Play Glasses LG Audio device Compatibility EC93** EC97** EG97** AG-F*** • • • Cinema 3D Glasses AN-mR500 •... -
Page 13: Parts And Buttons
ASSEMBLING AND PREPARING Parts and buttons A type : EC93** <Front> <Rear> Screen Speakers Remote Control Sensor and Intelligent Sensor LG Logo Light Joystick button B type : EC97** Built-In Camera Screen Speakers Remote Control Sensor and Intelligent Sensor LG Logo Light... - Page 14 Joystick Button - This button is located behind the TV screen. Joystick Button - This button is located below the TV screen. NOTE y You can set the LG Logo Light to on or off by selecting GENERAL in the main menus.
-
Page 15: Using The Joystick Button
ASSEMBLING AND PREPARING Using the joystick button You can operate the TV by pressing the button or moving the joystick left, right, up, or down. Basic Functions When the TV is turned off, place your finger on the joystick button and press Power On it once and release it. -
Page 16: Lifting And Moving The Tv
ASSEMBLING AND PREPARING Lifting and moving the Tv y When transporting a large TV, there should be at least 2 people. y When transporting the TV by hand, hold the TV as shown in the following illustration. Please note the following advice to prevent the TV from being scratched or damaged and for safe transportation regardless of its type and size. -
Page 17: Setting Up The Tv
ASSEMBLING AND PREPARING Setting up the Tv (Image shown may differ from your TV.) (Only EC97**) detaching the stand Back cover (Only EC93**, EG97**) Screen (Only EC93**) 8 EA 4 EA M4 x L20 M4 x L20 (Only EG97**) 8 EA Back cover M4 x L20 Screen... -
Page 18: Attaching The Av Cover
ASSEMBLING AND PREPARING Attaching the Av cover mounting on a table Lift and tilt the TV into its upright position on a table. Assemble the AV Cover as shown. - Leave a 10 cm (minimum) space from the wall for proper ventilation. - Page 19 ASSEMBLING AND PREPARING Securing the Tv to a wall WARNING (This feature is not available for all models.) y If a television is not positioned in a sufficiently To use the desk-type stand safely, make sure to securely stable location, it can be potentially hazardous attach it to a wall.
-
Page 20: Mounting On A Wall
TV carefully and install the wall mount bracket on a solid 400 x 400 wall perpendicular to the floor. When you attach the TV to other building materials, please contact qualified personnel. LG recommends that wall mounting be performed by a Standard screw qualified professional installer. Number of screws LSW420BX... -
Page 21: Wall Type Set-Up Guide
ASSEMBLING AND PREPARING Wall Type Set-up Guide how to detach the stand Type 1. Hanging the TV on the wall before removing a (Only EG97** - Separate purchase) stand. Guide spacer assembly Remove the VESA screws (4 EA). Wall mount bracket VESA screw Assemble Guide spacer (4 EA) and Guide spacer... - Page 22 ASSEMBLING AND PREPARING Type 2. Hanging the TV on the wall after removing a stand. Wall mount bracket CAUTION y When laying the TV on its back on a padded table or surface, be careful to prevent the TV from being damaged.
-
Page 23: Tidying Cables
ASSEMBLING AND PREPARING Tidying cables 2 Fix the cable management with cable management screw. (Image shown may differ from your TV.) Stand Type (Only EC93**) Gather and bind the cables with the cable holder. M4 x L10 2 EA NOTE y When attaching the cable management, use a magnetic screwdriver. -
Page 24: Using Built-In Camera
ASSEMBLING AND PREPARING Using Built-in Camera (Only EG97**) Gather and bind the cables with the cable holder. (Only EC97**, EG97**) You can make a video call or use the motion recognition function using the built-in camera of the TV. This TV does not support the use of an external camera. NOTE y Before using the built-in camera, you must recognize the fact that you are legally responsible... -
Page 25: Preparing Built-In Camera
ASSEMBLING AND PREPARING Preparing Built-in Camera Push down the built-in camera when you are not using it. Pull up the built-in camera at the back of the TV. Angle Adjustment Lever Slide Name of Parts of Built-in camera Camera Lens Protective Film NOTE... -
Page 26: Making Connections
MAKING CONNECTIONS mAKING CONNECTIONS Antenna connection Connect the TV to a wall antenna socket with an RF cable This section on mAKING CONNECTIONS mainly uses (75 Ω). diagrams for the EC97** models. Connect various external devices to the TV and switch in- put modes to select an external device. -
Page 27: Hdmi Connection
MAKING CONNECTIONS hdmI connection (Only EC97**) Transmits the digital video and audio signals from an external device to the TV. Connect the external device and the TV with the HDMI cable as shown. (Only EC93**) (*Not Provided - Depending on model) HDMI DVD / Blu-Ray / PC / (*Not Provided) - Page 28 MAKING CONNECTIONS (Only EG97**) ARC (Audio Return Channel) y An external audio device that supports SIMPLINK and ARC must be connected using hdmI/dvI IN 1 (ARC) or hdmI(4K @ 60 hz)/dvI IN 2 (ARC) port. y When connected with a high-speed HDMI cable, the external audio device that supports ARC outputs optical SPDIF without additional optical audio cable and supports the SIMPLINK function.
-
Page 29: Dvi To Hdmi Connection
MAKING CONNECTIONS dvI to hdmI connection (Only EC97**) Transmits the digital video signal from an external device to the TV. Connect the external device and the TV with the DVI-HDMI cable as shown. To transmit an audio signal, connect an audio cable. (Only EC93**) (*Not Provided) -
Page 30: Component Connection
MAKING CONNECTIONS Component connection (Only EG97**) Transmits analogue video and audio signals from an external device to the TV. Connect the external device and the TV with a component gender cable as shown. COMPONENT VIDEO AUDIO (*Not Provided) YELLOW GREEN (Use the composite (Use the component AUDIO OUT... -
Page 31: Composite Connection
MAKING CONNECTIONS Composite connection Audio connection Transmits analogue video and audio signals from an You may use an external audio system instead of the external device to the TV. Connect the external device built-in speaker. and the TV with a composite gender cable as shown. digital optical audio connection Transmits a digital audio signal from the TV to an external device. -
Page 32: Headphone Connection
MAKING CONNECTIONS headphone connection mhL connection Transmits the headphone signal from the TV to an exter- Mobile High-definition Link (MHL) is an interface for nal device. Connect the external device and the TV with transmitting digital audiovisual signals from mobile the headphone as shown. - Page 33 MAKING CONNECTIONS (Only EC97**) (Only EG97**) MHL passive cable (*Not Provided) MHL passive cable (*Not Provided) Mobile phone Mobile phone NOTE y Connect the mobile phone to the hdmI/dvI IN 4(mhL) or hdmI(4K @ 60 hz)/dvI IN 4(mhL) port to view the phone screen on the TV. y The MHL passive cable is needed to connect the TV and a mobile phone.
-
Page 34: Usb Connection
MAKING CONNECTIONS USB connection Connect a USB storage device such as a USB flash (Only EC97**, EG97**) memory, external hard drive or a USB memory card reader to the TV and access the Smart Share menu to use various multimedia files. (Only EC93**) (*Not Provided) (*Not Provided) -
Page 35: Remote Control
REMOTE CONTROL REmOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, re- place batteries (1.5 V AAA) matching the ends to the label inside the compartment, and close the battery cover. -
Page 36: Magic Remote Functions
MAGIC REMOTE FUNCTIONS mAGIC REmOTE FUNCTIONS When the message "Magic remote battery is low. Change the battery." is displayed, replace the battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching ends to the label inside the compartment, and close the battery cover. Be sure to point the magic remote toward the remote control sensor on the TV. -
Page 37: Registering Magic Remote
MAGIC REMOTE FUNCTIONS Registering magic Remote Precautions to Take when Using the magic Remote how to register the magic Remote BACK HOME To use the Magic Remote, first pair y Use the Magic Remote within the maximum it with your TV. communication distance (10 m). -
Page 38: Using The User Guide
USING THE USER GUIDE USING ThE USER GUIdE User Guide allows you to more easily access the detailed TV information. (home) button to access the Home 1 Press the menu. 2 Select User Guide and press the Wheel(OK) button. -
Page 39: Maintenance
MAINTENANCE / TROUBLESHOOTING mAINTENANCE Cleaning your Tv Clean your TV regularly to keep the best performance and to extend the product lifespan. CAUTION y Make sure to turn the power off and disconnect the power cord and all other cables first. y When the TV is left unattended and unused for a long time, disconnect the power cord from the wall outlet to prevent possible damage from lightning or power surges. -
Page 40: Environmental Information
SPECIFICATIONS SPECIFICATIONS (Only EC93**) Wireless module (LGSBW41) Specification Wireless LAN Bluetooth Standard IEEE 802.11a/b/g/n Standard Bluetooth Version 3.0 2400 to 2483.5 MHz Frequency Range 5150 to 5250 MHz Frequency Range 2400 to 2483.5 MHz 5725 to 5850 MHz (for Non EU) 802.11a: 13 dBm 802.11b: 15 dBm Output Power... -
Page 41: Specifications
SPECIFICATIONS Product specifications may be changed without prior notice due to upgrade of product functions. For the power supply and power consumption, refer to the label attached to the product. Thickness(T) Depth(D) 55EC93** mOdEL 55EC930T-TA 55EC939Y-TA With stand (mm) 1225 x 753 x 204 (W x H x D) Dimensions Without stand (mm) - Page 44 Record the model number and serial number of the TV. Refer to the label on the back cover and (Only DTV) quote this information to your dealer when requiring any service. MODEL SERIAL...
- Page 45 OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com...
- Page 46 KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button...
- Page 47 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 48 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
- Page 49 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 50 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 51 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 52 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 53 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 54 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 55 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 56 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...