Table of Contents
Advertisement
54
PROGRAMMING MODE - SETUP MODE
23. Time to keep the coin (Use only for coin type)
Entering set up
mode.
You will see LqC1
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display previous value.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
button to select time between 0 ~ 180.
Press the Start button.
The machine sets up the time to keep the coin, then
advancesto the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
Button
Display
Advertisement
Table of Contents
