Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these
instructions, and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
Wear protective
instructions
gloves
1. SAFETY
WARNING! Ensure Health & Safety, and local authority regulations are adhered to when assembling and using this tool rack.
‰
Locate tool rack in a suitable area where it will not be an obstruction.
9
Keep the general area clean, uncluttered and ensure there is adequate lighting.
9
WARNING! Mount tool rack on a flat and solid wall such as breeze block that is strong enough to hold fully laden tool rack.
‰
The tool rack should be firmly secured to the wall in a suitable location with fixings provided.
9
DO NOT attempt to wall mount the tool rack on your own. Obtain assistance or use manual handling equipment.
8
Wall mount the tool rack at such a height that minimises the risk of injury when used.
9
Keep children and unauthorised persons away from the storage area.
9
DO NOT use the tool rack for any purpose other than that for which it is designed.
8
DO NOT site the tool rack out of doors.
8
DO NOT get the tool rack wet or use in damp or wet locations or areas where there is condensation.
8
DO NOT clean the tool rack with any solvents or abrasives which may damage the coated surface.
8
DO NOT overload the tool rack when wall mounted.
8
Ensure that the tool rack is properly and firmly assembled and installed before loading it.
9
2. INTRODUCTION
Wall mounted rack specifically designed for the storage of power tools. Stores up to five power tools. Shelf space for power tool
battery chargers. Open fronted bays make tools easily accessible. Supplied flat packed.
3. SPECIFICATION
Model No.: ..................................................................PTSR5
Dimensions (WxHxD) ..............................535 x 230 x 300mm
Power tool storage bays ....................................................... 5
Shelves ................................................................................ 2
4. CONTENTS
© Jack Sealey Limited
POWER TOOL STORAGE RACK
PTSR5
MODEL NO:
Original Language Version
PTSR5
Issue 1
15/07/19
Advertisement
Related Manuals for Sealey PTSR5
Summary of Contents for Sealey PTSR5
- Page 1 PTSR5 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...