Table of Contents
Advertisement
COMPUTER MODE
Press the MODE button on the Top Control or the COMPUTER / MCI
button on Remote Control Unit. Select the Mode among COMPUTER,
VIDEO, or MCI mode.
Press the MENU button and the ON-SCREEN MENU will appear.
Press the POINT LEFT/RIGHT buttons to select Computer
press the SELECT button.
CURRENT MODE DISPLAY
When selecting the Computer Mode, the Current Mode display appears.
It shows the information of the computer of the mode selected.
Automatic Multiscanning system
This projector automatically adapt to most different types of computer
based on VGA, SVGA or XGA (refer to "COMPATIBLE COMPUTER
SPECIFICATION" on page 27). When selecting Computer, this
projector become automatically suited to the incoming signal and
projectors the proper image without any special setting. (Setting of the
Computer System may be required when connecting some computers.)
Note : The projector may provides the messages below.
The projector cannot discriminate or detect the input
Go PC adj.
signal from the computer. Adjust and set the computer
system manually. (Refer to page 26.)
There is no signal input from the computer. Make sure
No signal
the connection of the computer and the projector is set
correctly. (Refer to TROUBLESHOOTING on page 44.)
Selecting Computer System Manually
To set the Computer system manually, select the mode on the ON-
SCREEN MENU.
Press the MENU button and the ON-SCREEN MENU will appear.
1
Press the POINT LEFT/RIGHT buttons to select SYSTEM and
press the SELECT button. Another dialog box COMPUTER
MODE Menu will appear.
2
Press the POINT DOWN button and a red-arrow icon will appear.
Move the arrow to the system that you want to set, and then press
SELECT button.
SELECTING COMPUTER MODE
Direct Operation
Menu Operation
SELECTING COMPUTER SYSTEM
MODE button
COMPUTER
MCI
VIDEO
and
The system being selected.
The systems on this
dialog box can be
selected.
When
this
mark
displayed as black, more
computer system modes
will be available. Move
the arrow to this mark and
then press the SELECT
button, and another mode
will be displayed.
COMPUTER / MCI
button
COMPUTER
MCI
Providing the information of
the computer detected by
the projector.
SYSTEM BOX
It displays the SYSTEM
being selected.
is
It closes the
SYSTEM Menu.
25
Advertisement
Table of Contents
