Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSS63607P
Summary of Contents for AEG FSS63607P
- Page 1 FSS63607P User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
12. TECHNICAL INFORMATION................27 FOR PERFECT RESULTS Thank you for choosing this AEG product. We have created it to give you impeccable performance for many years, with innovative technologies that help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading to get the very best from it. - Page 3 ENGLISH of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. 1.1 Children and vulnerable people safety This appliance can be used by children aged from 8 • years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the use of the appliance in a...
-
Page 4: Safety Instructions
If the supply cord is damaged, it must be replaced by • the manufacturer, its Authorised Service Centre or similarly qualified persons in order to avoid a hazard. Put the cutlery in the cutlery basket with the sharp •... - Page 5 ENGLISH 2.4 Use be replaced, this must be carried out by our Authorised Service Centre. • Do not put flammable products or • Connect the mains plug to the mains items that are wet with flammable socket only at the end of the products in, near or on the appliance.
-
Page 6: Product Description
2.7 Disposal displays, pressure switches,... -
Page 7: Control Panel
ENGLISH 3.1 Beam-on-Floor • The red light flashes when the appliance has a malfunction. The Beam-on-Floor is a light that is The Beam-on-Floor is off displayed on the floor below the when the appliance is appliance door. deactivated. • A red light comes on when a programme starts. -
Page 8: Programme Selection
Indicator Description Salt indicator. It is on when the salt container needs refilling. Refer to "Be‐ fore first use". Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". - Page 9 ENGLISH 5.3 AUTO Sense The appliance senses the degree of soil and the amount of dishes in the baskets. The AUTO Sense program automatically It adjusts the temperature and quantity of adjusts the wash cycle to the type of water as well as the wash duration. load.
-
Page 10: Basic Settings
Consumption values Water (l) Energy (kWh) Duration (min) Programme Quick 9.3 - 11.4 0.54 - 0.66 10.6 - 12.9 0.80 - 0.93 1h 30min 10.4 - 12.7 0.97 - 1.10 2h 40min 10.8 - 13.2 0.97 - 1.11 10.5 0.821... - Page 11 ENGLISH Number Setting Values Description Key tones On (default) Activate or deactivate the sound of the but‐ tons when pressed. Latest pro‐ Enable or disable the automatic selection gramme selec‐ Off (default) of the most recently used programme and tion options.
- Page 12 German de‐ French de‐ mmol/l Clarke de‐ Water softener lev‐ grees (°dH) grees (°fH) grees <4 <7 <0.7 < 5 1) Factory setting. 2) Do not use salt at this level. Regardless of the type of detergent initiation has no impact on the cycle...
- Page 13 ENGLISH rinse phase. It is possible to set the CAUTION! released quantity of rinse aid. If children have access to When rinse aid chamber is empty, the the appliance, we advise to rinse aid indicator is on notifying to refill deactivate AirDry.
-
Page 14: Before First Use
Use Previous and Next to switch • The bar of the ECOMETER between the basic settings and to dedicated to the chosen setting change their value. flashes. • The display shows the current Use OK to enter the selected setting and setting value. -
Page 15: Daily Use
ENGLISH 7.2 How to fill the rinse aid dispenser 4. Carefully shake the funnel by its handle to get the last granules inside. 5. Remove the salt around the opening of the salt container. CAUTION! Only use rinse aid designed specifically for dishwashers. - Page 16 CAUTION! By default, options must be Only use detergent activated every time before specifically designed for you start a programme. dishwashers. If the latest programme selection is enabled, the 1. Press the release button (A) to open saved options are activated the lid (C).
-
Page 17: Hints And Tips
ENGLISH During the countdown, it is not possible the energy consumption and the to change the delay time and the programme duration. After closing the programme selection. door, the appliance continues from the point of interruption. When the countdown is complete, the programme starts. - Page 18 • You can use dishwasher detergent, • Make sure that the water softener rinse aid and salt separately or you level is correct. If the level is too high, can use the multi-tablets (e.g. ''All in the increased quantity of salt in the 1'').
-
Page 19: Care And Cleaning
ENGLISH 9.6 Unloading the baskets • Put hollow items (cups, glasses and pans) with the opening facing 1. Let the tableware cool down before downwards. you remove it from the appliance. Hot • Make sure that glass items do not items can be easily damaged. - Page 20 1. Disassemble the filters system as instructed in this chapter. 2. Remove any foreign objects by hand. CAUTION! 2. Remove the filter (C) out of filter (B).
- Page 21 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance.
- Page 22 1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. To detach the spray arm (C) from the 4. To install the spray arm back, press...
-
Page 23: Troubleshooting
ENGLISH 11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code. - Page 24 Problem and alarm code Possible cause and solution The temperature of the wa‐ • Make sure that the temperature of the inlet water does ter inside the appliance is not exceed 60°C. too high or malfunction of • Switch the appliance off and on.
- Page 25 ENGLISH Once you have checked the appliance, The PNC can be found on the rating deactivate and activate the appliance. If plate on the appliance door. You can the problem occurs again, contact an also check the PNC on the control panel. Authorised Service Centre.
- Page 26 Problem Possible cause and solution There are stains and dry water • The released quantity of rinse aid is not sufficient. Ad‐ drops on glasses and dishes. just the rinse aid level to a higher level. • The quality of the rinse aid can be the cause.
-
Page 27: Technical Information
ENGLISH Refer to "Before first use", "Daily use", or "Hints and tips" for other possible causes. 12. TECHNICAL INFORMATION Dimensions Width / height / depth (mm) 596 / 818 - 898 / 550 Voltage (V) 200 - 240 Electrical connection Frequency (Hz) 50 - 60 Water supply pressure... - Page 28 www.aeg.com/shop...