Pip/Pop/Pbp - Dell W3202MC Owner's Manual
Dell w3202mc: owners manual
Hide thumbs
Also See for W3202MC:
- Information manual (2 pages) ,
- Product information manual (164 pages)
Table of Contents
Advertisement
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸÝ¡ »¦³È\×¢¡æ\Dell\W3202_3706MC_EMEA_OM\MC_EMEA_proof
If you select Personal, you can adjust the individual audio levels, such as Treble, Bass and Balance.
TV Out Volume — Select Fixed if you want to adjust the volume using the remote or volume
control on an attached audio receiver. Select Variable if you want to adjust the volume using the
TV remote or front panel buttons. Using Variable adjusts the TV volume out not the volume on an
attached audio receiver.
Use Sound Mode to select Mono, Stereo, Dual1, Dual2, Nicam, Nicam-ST, Nicam-D1 and
Nicam-D2.
Use Mute to turn the TV sound on or off and use Speaker Out to turn on or off the sound from the
speaker.
PIP/POP/PBP
You can view two active sources simultaneously using Picture-In-Picture (PIP), Picture-Outside-
Picture (POP), or Picture-By-Picture (PBP).
The remote control offers the following PIP/POP/PBP options:
moves the window left and + moves the window to the right. When you are adjusting the vertical
orientation, 0 is at the top of the screen and 100 is at the bottom of the screen.
For POP, you can select from three different POP options:
•
POP1
One large POP window to the left and a smaller, centered window on the right.
—
•
POP3
One large POP window to the left and three smaller, vertically-aligned windows on
—
the right.
•
POP12
One large, centered POP window surrounded by twelve smaller windows.
—
POP Scan Mode allows you to select Sequential or Float. Float mode plays the source for selected
channels that appear in the windows. Sequential rotates through each window and plays all of the
preselected channels. The rotation runs through all the available channels before it starts again at
the lowest channel.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 1 0 / 2 / 0 5 – F O R P R O O F O N LY
• Use the PIP button or the POP/ PBP
button on the remote control to turn on and
off PIP, POP, and PBP.
• If you are in PIP, or PBP mode, use the
SWAP button on the remote control to
switch between the two windows.
• Use the POS button on the remote to
change which corner of the screen the PIP
window appears.
In the TV Menu, you can adjust the
Transparency, the Size, and H (horizontal) and
V (vertical) position of the PIP windows. When
you are selecting the horizontal orientation, -
Using the TV Menu
31
Hide quick links:
Advertisement
Table of Contents
