Related Manuals for LG UF73 Series
Summary of Contents for LG UF73 Series
- Page 1 LED TV UF77** UF73** www.lg.com 40/43/49/55/60/65UF77** (M4 X L14) P/No: MFL68889702 (1509-REV01) Printed in Korea...
- Page 2 English...
- Page 5 OPTICAL DIGITAL AUDIO OUT SVC ONLY VIDEO AUDIO VIDEO AUDIO MONO...
- Page 7 70UF770T-TD 40UF770T-TD 43UF770T-TD 49UF770T-TD 55UF770T-TD 60UF770T-TD 65UF770T-TD 70UF770Y-TD 40UF770Y-TD 43UF770Y-TD 49UF770Y-TD 55UF770Y-TD 60UF770Y-TD 65UF770Y-TD 70UF730T-TR 70UF730Y-TR (mm) 906 x 576 x 218 971 x 625 x 218 1104 x 704 x 261 1240 x 781 x 261 1348 x 846 x 273 1460 x 903 x 273 1572 x 964 x 284 (mm) 906 x 524 x 56.7 971 x 570 x 56.4 1104 x 645 x 56.7 1240 x 722 x 56.7 1348 x 782 x 58.5 1460 x 846 x 58.5 1572 x 909 x 59.7 10.0 11.4...
- Page 9 OWNER’S MANUAL Safety and Reference LED TV* * LG LED TV applies LCD screen with LED backlights. Please read this manual carefully before operating your set and retain it for future reference. www.lg.com *MFL68702233* P/NO : MFL68702233 (1506-REV00) Printed in Korea...
-
Page 10: Safety Instructions
Safety instructions Please read these safety precautions carefully before using the product. Make sure to connect Mains cable to compliant AC mains socket with Grounded earth pin. (Except for devices which are not grounded on WARNING earth.) Otherwise possibility you may be electrocuted or injured. Insert power cable plug completely into wall socket otherwise if not Do not place the TV and/or remote control in the following secured completely into socket, fire ignition may break out. - Page 11 Do not plug too many electrical devices into a single multiple electrical Do not put or store inflammable substances near the product. There is a outlet. Otherwise, this may result in fire due to over-heating. danger of combustion/explosion or fire due to careless handling of the inflammable substances.
- Page 12 Only use an authorized AC adapter and power cord approved by discretion. Fire or electric shock accident can occur. LG Electronics. Otherwise, this may result in fire, electric shock, Contact the service centre for check, calibration or repair. malfunction or product deformation.
- Page 13 If you intend to mount the product to a wall, attach VESA standard mounting interface (optional parts) to the back of the product. When you install the set to use the wall mounting bracket (optional parts), fix it carefully so as not to drop. Signal from Remote Control can be interrupted due to external/internal Only use the attachments / accessories specified by the manufacturer.
- Page 14 Prevent dust collecting on the power plug pins or outlet. This may cause When unplugging the cable, grab the plug and unplug it, by pulling at a fire hazard. the plug. Don’t pull at the cord to unplug the power cord from the power board, as this could be hazardous.
- Page 15 Viewing 3D imaging (Only 3D models) WARNING The panel is a high technology display product with resolution of Viewing environment two million to eight million pixels. You may see tiny black dots and/ or brightly coloured dots (red, blue or green) at a size of 1 ppm on the • ...
- Page 16 Cautions when using the 3D glasses < 18 mm • Make sure to use LG 3D glasses. Otherwise, you may not be able to view 3D videos properly. • Use a certified cable with the HDMI logo attached. • Do not use 3D glasses instead of your normal glasses, sunglasses or • ...
-
Page 17: Separate Purchase
• Hold the top and bottom of the TV frame firmly. Make sure not to * Some models require Wi-Fi/Bluetooth Dongle for using Magic Remote hold the transparent part, speaker, or speaker grill area. or LG Audio Device. * Supporting device of Wi-Fi/Bluetooth Dongle is a different in accordance with model. -
Page 18: Using The Joystick Button
Using the joystick button Mounting on a table You can simply operate the TV functions, pressing or moving the joystick (Image shown may differ from your TV.) button up, down, left or right. 1 Lift and tilt the TV into its upright position on a table. NOTE • ... -
Page 19: Mounting On A Wall
• Use the screws and wall mounts that meet the VESA standard. Any We recommend the use of LG’s wall mount bracket. LG’s wall mount damages or injuries by misuse or using an improper accessory are bracket is easy to move with cables connected. -
Page 20: Connections (Notifications)
Connections (notifications) • When installing the wall mounting bracket, use the Adhesive Label. The Adhesive Label will protect the opening from accumulating dust and dirt. (Only when the item of the following Connect various external devices to the TV and switch input modes to form is provided) select an external device. -
Page 21: Remote Control
Remote control Satellite dish connection (Only satellite models) Connect the TV to a satellite dish to a satellite socket with a satellite RF (Depending on model) cable (75 Ω). The descriptions in this manual are based on the buttons on the remote control. -
Page 22: Magic Remote Functions
Magic remote functions Number buttons Enters numbers. INPUT Q.MENU RATIO Shows programme guide. (Depending on model) SUBTITLE Returns to the previously viewed programme. When the message “Magic remote battery is low. Change the battery.” is Adjusts the volume level. displayed, replace the battery. Accesses your favourite programme list. - Page 23 wxyz pqrs LIST INFO EXIT Registering magic remote How to register the magic remote To use the Magic Remote, first pair it with your TV. 1 Put batteries into the Magic Remote and turn the TV on. GUIDE 2 Point the Magic Remote at your TV and press the Wheel (OK) on the remote control.
-
Page 24: Specifications
(Only UF64**, UF68**, UF77**, UF83**) disclaimers and copyright notices are available for download. Wireless module (LGSBW41) Specification LG Electronics will also provide open source code to you on CD-ROM 0197 for a charge covering the cost of performing such distribution (such... - Page 25 CI Module Size (W x H x D) 100.0 mm x 55.0 mm x 5.0 mm Operating Temperature 0 °C to 40 °C Operating Humidity Less than 80 % Environment condition Storage Temperature -20 °C to 60 °C Storage Humidity Less than 85 % 1 Only Satellite models.
- Page 26 (Only Jordan) WEEE 0197 Disposal of your appliance The symbol indicating separate collection for electrical and electronic equipment consists of the crossed-out wheeled bin. 0197...
- Page 28 021 36 54 54 in Algeria Other countries, Please contact our local dealer or log into http://www.lg.com (Only DTV) Record the model number and serial number of the TV. Refer to the label on the back cover and quote this information to your dealer when requiring any service.
-
Page 29: External Control Device Setup
OWNER’S MANUAL EXTERNAL CONTROL DEVICE SETUP Please read this manual carefully before operating the set and retain it for future reference. www.lg.com... -
Page 30: Key Codes
KEY CODES KEY CODES • This feature is not available for all models. Code Code Function Note Function Note (Hexa) (Hexa) CH +, PR + R/C Button List R/C Button CH -, PR - R/C Button Exit R/C Button Volume + R/C Button PIP(AD) R/C Button... - Page 31 (TV) (PC) • LGTV supports PL2303 chip-based (Vendor ID : 0x0557, Product ID : 0x2008) USB to serial converter RS-232C IN which is not made nor provided by LG. (CONTROL & SERVICE) (TV) (PC) • It can be purchased from computer stores that carry accessories for IT support professionals.
- Page 32 EXTERNAL CONTROL DEVICE SETUP (TV) (PC) (TV) (PC) Phone jack Type RS-232C IN • You need to purchase the phone-jack to RS-232 cable required for the connection between the PC and (CONTROL & SERVICE) (PC) (TV) the TV, which is specified in the manual. RS-232C IN (CONTROL &...
- Page 33 EXTERNAL CONTROL DEVICE SETUP Communication Parameters • Baud rate : 9600 bps (UART) • Stop bit : 1 bit • Data length : 8 bits • Communication code : ASCII code • Parity : None • Use a crossed (reverse) cable. Command reference list (Depending on model) DATA...
- Page 34 EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving Protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the TV. (j, k, m or x) [Command 2] : Second command to control the TV. [Set ID] : You can adjust the [Set ID] to choose desired monitor ID number in option menu. Adjustment range in TV is 1 to 99.
- Page 35 EXTERNAL CONTROL DEVICE SETUP * Commands may work differently depending on model and signal. 01. Power (Command: k a) Ack [d][ ][Set ID][ ][OK/NG][Data][x] ► To control Power *On or Off of the set. * In case of video mute on only, TV will display On Transmission[k][a][ ][Set ID][ ][Data][Cr] Screen Display(OSD).
- Page 36 EXTERNAL CONTROL DEVICE SETUP Data Min : 00 to Max : 64 * (Depending on model) Ack [i][ ][Set ID][ ][OK/NG][Data][x] 14. Bass (Command: k s) 09. Tint (Command: k j) ► To adjust Bass. ► To adjust the screen tint. You can also adjust in the AUDIO menu.
- Page 37 EXTERNAL CONTROL DEVICE SETUP Set ID = All = 00 5th Band 20(decimal) Data 00 & 01 = Channel Data is 10 = 00 0a Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x] Data 02 = Analog Antenna TV = 00 Result = ma 00 00 0a 00 * It depends on model, and can adjust when sound mode is EQ adjustable value.
- Page 38 EXTERNAL CONTROL DEVICE SETUP Number Data 05 = Digital Antenna TV = 02 - 22 : Antenna TV (DTV) – Don’t Use Physical Total = ma 00 00 00 11 00 01 02 Channel Number - 26 : Cable TV (CADTV) - Don’t Use Physical 2.
- Page 39 11 11 EXTERNAL CONTROL DEVICE SETUP 24. Input select (Command: x b) (Main Picture Input) ► To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data X : don’t care 00 : DTV 01 : CADTV 02 : Satellite DTV 10 : ATV Ack [t][ ][Set ID][ ][OK][Data00][Data01][Data02] ISDB-BS (Japan)
- Page 40 EXTERNAL CONTROL DEVICE SETUP 27. Auto Configure (Command: j u) (Depending on model) ► To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 01 : Run Auto Configure Ack [u][ ][Set ID][ ][OK/NG][Data][x]...