Using the IR Receiver
This allows a remote control sensor to be placed
in a custom location. The IR receiver is made with
a magnet. You can attach it to the monitor edge.
Portrait Layout
To install in portrait mode, rotate the set
counterclockwise 90 degrees when looking at from
the front.
ASSEMBLING AND PREPARING
Using the Kensington security system
(This is not available for all models.)
The Kensington security system connector is
located at the back of the monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the monitor set and a table.
NOTE
The Kensington security system is optional.
y
y
You can obtain additional accessories from
most electronics stores.
9