Related Manuals for Husqvarna G543ST
Summary of Contents for Husqvarna G543ST
- Page 1 OWNER’S MANUAL Model Number G543ST MFG. ID NO. 96073002600 Product No. 960 73 00-26 54 Inch Mower Grass Catcher • Assembly • Operation • Customer Responsibilities • Repair Parts 532425622 12.04.08 TH Printed in U.S.A.
-
Page 2: Safety Rules
SAFETY RULES Safe Operation Practices for Ride-On Mowers IMPORTANT: THIS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROW ING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS INJURY OR DEATH. • Data indicates that operators, age 60 years and above, are involved in a large percentage of riding mower-re- WARNING: In order to prevent ac- lated injuries. -
Page 3: Table Of Contents
SAFETY RULES Safe Operation Practices for Ride-On Mowers IV. TOWING machine. Repair, if necessary, before restarting. • Never make any adjustments or repairs with the engine • Tow only with a machine that has a hitch designed for run ning. towing. -
Page 4: Caton Contents
KNOW YOUR GRASS CATCHER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE ASSEMBLING OR OPERATING YOUR GRASS CATCH ER. Compare the illustrations with the carton contents to familiarize yourself with the parts before starting the assembly. Study the operating instructions and safety precautions thoroughly to insure proper functioning of your Grass Catcher and to prevent injury to yourself and others. -
Page 5: Assembly
ASSEMBLY BAGGER SUPPORT ASSEMBLY Determine which type drawbar you have on your tractor. 2. Align support assembly pin with hole in drawbar and hang assembly over the shoulder bolts. Compare the drawbar illustrations below to the drawbar 3. Be sure support assembly is seated properly and secure located at the rear of your tractor. - Page 6 MOUNTING COVER ASSEMBLY TO SUPPORT ASSEMBLY (See Fig. 2) DRAWBAR D (See Figs. 1D) NOTE: For ease of assembly, you may wish to obtain the as sis tance of another person for mounting cover assembly Slide flanges of support assembly into drawbar slots first, to tractor.
- Page 7 LOWER CHUTE (See Fig. 4) CONTAINER MOUNTING (See Fig. 3) 1. Raise and hold deflector shield in upright position. 1. Install one container to left side first. Install another container to center position and one in right position. 2. Place slot in lower chute over mounting tab on mower and position lower chute over mower opening as NOTE: Left edge of right con tain er should always over lap shown.
- Page 8 LEVEL MOWER DECK UPPER CHUTE (See Figs. 5A and 5B) 1. Lower mower to its lowest cutting position. • Be sure deck is properly leveled for best mower per for mance. See your tractors owner's manual for 2. Assemble upper chute by inserting curved end into instructions.
-
Page 9: Operation
OPERATION TIPS FOR IMPROVED BAGGING • Your bagger is equipped with a full bagger indicator. Movement of the wheel increases as the bags fill. The OPE RA TION: wheel will be spinning fastest just before the bags fill Follow the mower operation instructions in your tractor completely. -
Page 10: Customer Responsibilities
CUSTOMER RESPONSIBILITIES GENERAL RECOMMENDATIONS CAUTION: Grass catcher components Always observe safety rules when performing any main- are subject to wear, damage and te nance. deterioration, which could expose moving parts or allow objects • Before each use check for loose fasteners. to be thrown. - Page 11 SERVICE NOTES...
-
Page 12: Repair Parts
REPAIR PARTS GRASS CATCHER MODEL NUMBER G543ST (MFG. ID 96073002600) PRODUCT NO. 960 73 00-26 PART PART DESCRIPTION DESCRIPTION 532069180 Nut, Crown lock #10-24 871081010 Screw #10-24 x 5/8 532192709 Screen, Cover 532124670 Spring, Retainer 532195373 Cover Assembly (Includes 34, 37)