Table of Contents
Advertisement
Removal steps
M.2 solid-state drive and heat sink
Prerequisite
Before you start, read Chapter 1 "Important safety information" on page 1 and print the following
instructions.
The heat sink might be very hot. Before you open the computer cover, turn off the computer and wait several
minutes until the computer is cool.
Attention: The internal storage drive is sensitive. Inappropriate handling might cause damage and
permanent loss of data. When handling the internal storage drive, observe the following guidelines:
• Replace the internal storage drive only for upgrade or repair. The internal storage drive is not designed for
frequent changes or replacement.
• Before replacing the internal storage drive, make a backup copy of all the data that you want to keep.
• Do not touch the contact edge of the internal storage drive. Otherwise, the internal storage drive might get
damaged.
• Do not apply pressure to the internal storage drive.
• Do not make the internal storage drive subject to physical shocks or vibration. Put the internal storage
drive on a soft material, such as cloth, to absorb physical shocks.
For access, remove the following parts in order:
• "" on page
• "Front bezel" on page 57
• "Drive bay assembly" on page 59
Removal steps
Remove the M.2 solid-state drive and the heat sink (if any) according to the computer model.
62
M75t Gen 2 Hardware Maintenance Manual
Advertisement
Table of Contents
