Table of Contents
Advertisement
Operation Manual / A150-M58/68
3 Removing and Installing / 3.3 Installing the turbocharger
3.3.5
Connecting the turbocharger
Fig. 21: Connecting the speed sensor
Connect cable to speed sensor (86515).
u
Connect all gas, water and air lines according to the instructions of the enginebuilder.
u
Version with compressor wheel cooling
CAUTION
Failure of compressor wheel cooling
Any prolonged failure of the compressor wheel cooling will shorten the re-
placement interval of the compressor wheel.
Make sure there is an uninterrupted supply of cooling air during opera-
u
tion.
Fig. 22: Connecting the compressor cooling air intake
Remove the screw plug on the connection for the compressor wheel cooling (06) and fit
u
the cooling air line.
3.3.6
Attaching the support
Fig. 23: Attaching the support
If present: Attach support (61301) to engine support or to a connecting piece.
u
© Copyright 2022 ABB. All rights reserved.
HZTL4041_EN
Rev.F
February 2022
Advertisement
Chapters
Table of Contents
