Installing Ddr-Sdram Dimms - HP Compaq dx6100 ST Hardware Reference Manual

Business desktops slim tower model

Hide thumbs Also See for Compaq dx6100 ST:

Table of Contents

Hardware Upgrades

Installing DDR-SDRAM DIMMs

2-10

CAUTION: The memory module sockets have gold metal contacts. When

upgrading the memory, it is important to use memory modules with gold

metal contacts to prevent corrosion and/or oxidation resulting from having

incompatible metals in contact with each other.

CAUTION: Static electricity can damage the electronic components of

the computer or optional cards. Before beginning these procedures,

ensure that you are discharged of static electricity by briefly touching a

grounded metal object. Refer to

more information.

CAUTION: When handling a memory module, be careful not to touch

any of the contacts. Doing so may damage the module.

1. If you have locked the Smart Cover Lock, restart the computer

and enter Computer Setup to unlock the lock.

2. Turn off the computer properly through the operating system,

then turn off any external devices.

3. Disconnect the power cord from the power outlet and disconnect

any external devices.

4. Remove the computer from the stand and lay the computer on its

side.

5. Remove the computer cover.

6. Locate the memory module sockets on the system board.

WARNING: To reduce risk of personal injury from hot surfaces, allow

the internal system components to cool before touching.

www.hp.com

Appendix D, "Electrostatic Discharge"

Hardware Reference Guide

for

Table of Contents

Compaq dx6100