Adjusting The Headlight - Bosch ZEMO SU-E FS 12 Translation Of Original Operating Instructions
Pedelecs with led remote on-board computer
Hide thumbs
Also See for ZEMO SU-E FS 12:
- Translation of original operating instructions (262 pages)
Table of Contents
Advertisement
6.5.18.1 Adjusting the headlight
Figure 170: Measuring on the wall
4 Place pedelec 5 m in front of the wall.
5 Stand the pedelec up straight.
I
II
III
Figure 171: Light positioned too high (1), correctly (2) and too low (3)
8 Check the position of the light beam.
(I) if the upper edge of the light beam is above the headlight height mark (1), the riding light will dazzle.
The headlight must be positioned lower.
If the mid-point of the light beam is on or slightly below the mark showing half the height of the
headlight (2), the lighting is optimally positioned.
If the light beam is in front of the wall, move the headlight up.
MY22Z0a - 12_1.0_25.07.2022
1 Position the pedelec so that its front is facing a
wall.
2 Mark the height of the headlight (1) on the wall
with chalk.
3 Mark half the height of the headlight (2) on the
wall with chalk.
1
2
6 Hold the handlebars straight with both hands.
Do not use the kickstand.
7 Switch on riding light.
Operation
1
2
1
2
1
2
152
Advertisement
Table of Contents
