Advertisement
Quick Links
Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions,
and properly maintained, give you years of trouble free performance.
IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE
THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE DAMAGE AND/OR
PERSONAL INJURY AND WILL INVALIDATE THE WARRANTY. KEEP THESE INSTRUCTIONS SAFE FOR FUTURE USE.
Refer to
instruction
manual
1. SAFETY
WARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this equipment.
‰
Familiarise yourself with the application and limitations of the panel bag set, as well as the potential hazards.
9
Maintain the set in good condition.
9
Replace damaged parts.
9
Use genuine parts only. Unauthorised parts may be dangerous and will invalidate the warranty.
Maintain correct balance and footing. Ensure floor is not slippery and wear non-slip shoes.
9
Keep children and unauthorised persons away from the working area.
9
DO NOT put hands/fingers in apertures created by bags without first inserting a mechanical chock to prevent accidental injury
8
DO NOT use the panel bags for purposes other than those for which they were designed.
8
DO NOT over-inflate.
8
DO NOT use on doors fitted with air bags.
8
DO NOT use when you are tired, under the influence of alcohol, drugs or intoxicating medication.
8
Deflate bag prior to storage.
9
Store in clean dry place.
9
2. INTRODUCTION
Multi-purpose durable air cushion devices with rigid edges and fine air control valve. Suitable for positioning panels, bonnets and boots, prior to
fitment. 2mm thickness and semi-rigid construction allow bags to be slid between window frame and weather-stripping for improved access for
emergency vehicle opening tools. Soft air cushion is gentle on paintwork, frame, beadings and glass. Can also be used for positioning kitchen
units, windows and doors.
3. SPECIFICATION
Model No: ..................................................................VS9114
Load Capacity: ............................................................. 135kg
Bag Dimensions (W x H): ...................................Refer to fig.1
Bag 1: ...............................................................128 x 270mm
Bag 2: ...............................................................150 x 165mm
Bag 3: ...............................................................115 x 190mm
Minimum/Maximum Thickness ............................ 2mm-80mm
fig.1
© Jack Sealey Limited
PANEL BAG SET 3PC
MODEL NO:
3
1
2
Original Language Version
VS9114
VS9114 Issue 2 (5) 09/06/22
Advertisement
Related Manuals for Sealey VS9114
Summary of Contents for Sealey VS9114
- Page 1 VS9114 MODEL NO: Thank you for purchasing a Sealey product. Manufactured to a high standard, this product will, if used according to these instructions, and properly maintained, give you years of trouble free performance. IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS. USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED.
- Page 2 Important: No Liability is accepted for incorrect use of this product. Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim. Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR 01284 757500 01284 703534 sales@sealey.co.uk...