Operation Manual / A130-H.. - A140-H..
3 Removing and Installing / 3.2 Removing the turbocharger
3.2.3
Putting down the turbocharger
WARNING
Risk of tipping
If the turbocharger is not positioned stably, it may tip over. This can result in
serious personal injury.
Place the turbocharger on a clean, level support.
u
Secure the turbocharger to prevent it from tipping over by using wooden
u
beams and wedges and by taking the centre of gravity into account.
Fig. 14: Putting down the turbocharger
Remove turbocharger from engine support, set it down properly in an appropriate place
u
and secure it.
Close or cover the openings of the turbocharger and support.
u
© Copyright 2021 ABB. All rights reserved.
HZTL4030_EN
Rev.G
July 2021