Table of Contents
Advertisement
Operation Manual / A130-M.. - A145-M..
9 Dismantling and fitting / 9.16 Installing the compressor casing
Installing the compressor casing
Fig. 60: Installing the compressor casing
Product
A130
A135
A140
A145
Table 43: Tightening torque (72011)
1. Fit a new O-ring (42012).
2. Thoroughly clean the fastening strips (72012) before assembly.
3. Attach swivel lifting eyes (S) to compressor casing (72000). Secure lifting gear to the
swivel lifting eyes.
4. Install the compressor casing (72000).
5. Install the fastening strips (72012) with screws (72011). Observe the tightening torque. If
these screws do not have a Verbus Ripp® integrated, Verbus Ripp® washers (72010) must
also be fitted.
© Copyright 2022 ABB. All rights reserved.
Size
M8
M10
M12
M14
HZTL4031_EN
Tightening torque [Nm]
35
70
105
170
Rev.P
February 2022
Advertisement
Chapters
Table of Contents
