Table of Contents
Advertisement
Operation Manual / 4 Product description / A100-L
2 Removal and installation / 2.1 Turbocharger weight
2
Removal and installation
2.1
Turbocharger weight
Lifting gear with a sufficient load limit must be used for transporting the turbocharger. The
weight specified below applies to the heaviest variant possible. Depending on the specifica-
tion, the weight specified on the rating plate may be lower than the standard value specified
here.
Product
A165-L
A170-L
A175-L
A180-L
A185-L
A190-L
Table 2: A100-L Weights
2.2
Removing the turbocharger
WARNING
Risk of tipping
If the turbocharger is not sufficiently supported or not supported at all dur-
ing removal and installation, it may tip over and cause severe injury to per-
sonnel or accidents resulting in fatalities.
Support the turbocharger at a suitable location.
u
Secure with lifting gear wherever possible.
u
Wear safety helmet.
Loosen cable to speed sensor.
u
Disconnect all pipes according to the instructions of the enginebuilder.
u
Check lifting gear.
u
Fasten lifting gear on suspension eyes of the bearing casing and tauten.
u
© Copyright 2018 ABB. All rights reserved.
Weight [kg]
HZTL4034_EN
2300
3300
5600
7500
10500
13500
Revision N
November 2018
Advertisement
Chapters
Table of Contents
