hit counter script
Cisco Linksys SPA3102 User Manual
  1. Manuals
  2. Brands
  3. Cisco Manuals
  4. Gateway
  5. Linksys SPA3102
  6. User manual

Cisco Linksys SPA3102 User Manual

Voice gateway with router
Hide thumbs Also See for Linksys SPA3102:
Table of Contents

Advertisement

Quick Links

See also: Administration Manual
Voice Gateway with Router
User Guide
Voice
SPA3102
Model No.

Advertisement

Table of Contents
loading

Related Manuals for Cisco Linksys SPA3102

Summary of Contents for Cisco Linksys SPA3102

  • Page 1 Voice Gateway with Router User Guide Voice SPA3102 Model No.
  • Page 3 Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc. and/or its affiliates in the U.S. and certain other countries. Copyright © 2006 Cisco Systems, Inc. All rights reserved. Other brands and product names are trademarks or registered trademarks of their respective holders.
  • Page 4 Voice Gateway with Router...

  • Page 5: Table Of Contents

    Table of Contents Chapter 1: Introduction Welcome What’s in this Guide? Chapter 2: Networking Basics An Introduction to Local Area Networks The Use of IP Addresses Chapter 3: Getting to Know the Voice Gateway The Back Panel The Front Panel Chapter 4: Getting Started Before You Begin Connecting the Voice Gateway...
  • Page 6 Voice Gateway with Router Appendix A: Troubleshooting Common Problems and Solutions Frequently Asked Questions Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter Windows 98 or Me Instructions Windows 2000 or XP Instructions For the Voice Gateway’s Web-based Utility Appendix C: Windows Help Appendix D: Glossary Appendix E: Specifications...
  • Page 7 List of Figures Figure 3-1: Back Panel Figure 3-2: Front Panel Figure 4-1: Connect to the Telephone Wall Jack Figure 4-2: Connect a Telephone Figure 4-3: Connect a PC Figure 4-4: Connect to the Modem Figure 4-5: Connect Power Figure 4-6: Login Screen Figure 4-7: Router - WAN Setup Screen Figure 4-8: MAC Clone Settings Figure 4-9: Static IP Settings...
  • Page 8 Voice Gateway with Router Figure 6-12: Voice - User 1 Screen Figure 6-13: Speed Dial and Supplementary Service Settings Figure 6-14: Distinctive Ring and Ring Settings Figure 6-15: Voice - PSTN User Screen Figure 6-16: PSTN-To-VoIP Speed Dial Settings Figure 6-17: PSTN Ring Thru Line 1 Distinctive Ring Settings Figure 6-18: PSTN Ring Thru Line 1 Ring Settings Figure B-1: IP Configuration Screen Figure B-2: MAC/Adapter Address...

  • Page 9: Chapter 1: Introduction

    Chapter 1: Introduction Welcome Thank you for choosing the Voice Gateway with Router. This Voice Gateway will allow your computers to share a high-speed Internet connection as well as resources, including files and printers. Plus, the Voice Gateway can bridge traditional phone service, also known as Public Switched Telephone Network (PSTN) service, with Internet phone service, also known as Voice over Internet Protocol (VoIP).

  • Page 10: What's In This Guide

    Voice Gateway with Router To create your network, install and set up the Voice Gateway. To guide you through the process, use the instructions in the Quick Installation or this User Guide to help you. These instructions should be all you need to get the most out of the Voice Gateway.
  • Page 11 • Appendix A: Troubleshooting This appendix describes some possible problems and solutions, as well as frequently asked questions, regarding installation and use of the Voice Gateway. • Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter This appendix instructs you on how to find the MAC address or Ethernet address of your PC’s Ethernet network adapter.
  • Page 12 Voice Gateway with Router Chapter 1: Introduction What’s in this Guide?

  • Page 13: Chapter 2: Networking Basics

    Chapter 2: Networking Basics An Introduction to Local Area Networks Simply put, a router is a network device that connects two networks together. The Voice Gateway connects your local area network (LAN), or the group of PCs in your home or office, to the Internet.
  • Page 14 Voice Gateway with Router If you use the Voice Gateway to share your cable or DSL Internet connection, contact your ISP to find out if they have assigned a static IP address to your account. If so, you will need that static IP address when configuring the Voice Gateway.

  • Page 15: Chapter 3: Getting To Know The Voice Gateway

    Chapter 3: Getting to Know the Voice Gateway The Back Panel The Voice Gateway’s ports are located on the back panel. Figure 3-1: Back Panel LINE Use this port to connect the Voice Gateway to your standard telephone wall jack. PHONE Use this port to connect an analog phone (or fax machine) with an RJ-11 telephone cable.

  • Page 16: The Front Panel

    Voice Gateway with Router The Front Panel The Voice Gateway’s LEDs, which inform you about network activities, are located on the front panel. Figure 3-2: Front Panel Power Green. The Power LED lights up when the Voice Gateway is powered on and connected to the Internet.

  • Page 17: Chapter 4: Getting Started

    Chapter 4: Getting Started Before You Begin Make sure you have the following: • An active Internet connection • An active Internet phone service account and its settings • cable/DSL modem • One computer for configuration of the Voice Gateway •...

  • Page 18: Figure 4-3: Connect A Pc

    Voice Gateway with Router 4. Connect one end of an Ethernet network cable (included) to the ETHERNET port of the Voice Gateway. Connect the other end to the Ethernet port of your PC. 5. Connect one end of a different Ethernet network cable to the INTERNET port of the Voice Gateway. Connect the other end to your cable/DSL modem.

  • Page 19: Configuring The Voice Gateway

    Configuring the Voice Gateway 1. Launch the web browser on the PC. 2. Enter 192.168.0.1/advanced in the Address field (192.168.0.1 is the default local IP address of the Voice Gateway). Then press the Enter key. 3. If your Internet Telephony Service Provider (ITSP) did not supply a password, you will not see a login screen. Proceed to step 4.

  • Page 20: Figure 4-9: Static Ip Settings

    Voice Gateway with Router Static IP a. Select Static IP from the Connection Type drop-down menu. b. In the Static IP Settings section, enter the IP address in the Static IP field, the subnet mask in the NetMask field, and the default gateway IP address in the Gateway field. c.

  • Page 21: Chapter 5: Using The Interactive Voice Response Menu

    Chapter 5: Using the Interactive Voice Response Menu Overview NOTE: If your ITSP sent you the Voice Gateway, then it may be pre-configured for you, and you do not need to change any settings. Refer to the instructions supplied by your service provider for more information.

  • Page 22: Using The Interactive Voice Response Menu

    Voice Gateway with Router Using the Interactive Voice Response Menu While entering a value, such as an IP address, you may exit without entering any changes. Press the * (star) key twice within half a second. Otherwise, the * will be treated as a decimal point or dot. After entering a value, such as an IP address, press the # (pound) key to indicate you have finished your selection.
  • Page 23 Gateway’s Internet (external) interface. Hear the network or subnet mask assigned to the Voice Gateway. Hear the IP address of the Voice Gateway (usually the network router). Hear the MAC address of the Voice Gateway in hexadecimal string format. Voice Gateway with Router ip (internet protocol): a protocol used to send data over a network.
  • Page 24 Voice Gateway with Router Interactive Voice Response Menu Action Command Choices (press these keys on the telephone) Check Firmware Version Check Primary DNS Server IP Address Check Internet Web Server Port Check Local IP Address Set Internet Press 0 to use DHCP. Connection Type Press 1 to use a static IP address.
  • Page 25 Interactive Voice Response Menu Action Command Choices (press these keys on the telephone) Set Network (or Enter the network or Subnet) Mask subnet mask using numbers on the telephone keypad. Use the * (star) key when entering a decimal point. Set Gateway IP Enter the IP address using Address...
  • Page 26 Voice Gateway with Router Interactive Voice Response Menu Action Command Choices (press these keys on the telephone) Set the Mode Press 0 to select the router/NAT mode. Press 1 to select the bridge/switch mode. Enable/Disable WAN 7932 Press 1 to enable. Access to the Press 0 to disable.

  • Page 27: Entering A Password

    Interactive Voice Response Menu Action Command Choices (press these keys on the telephone) User Factory Reset 877778 Press 1 to confirm. Press * (star) to cancel. Entering a Password You may be prompted to enter a password when you want to reset the Voice Gateway to its factory default settings.

  • Page 28: Configuring The Settings For Your Internet Phone Service

    Voice Gateway with Router • To enter P, Q, R, S, o, q, r, or s — press 7. • To enter T, U, V, t, u, or v — press 8. • To enter W, X, Y, Z, w, x, y, or z — press 9. •...

  • Page 29: Chapter 6: Using The Web-Based Utility

    Chapter 6: Using the Web-based Utility Overview NOTE: If your ITSP sent you the Voice Gateway, then it may be pre-configured for you, and you do not need to change any settings. Refer to the instructions supplied by your service provider for more information.

  • Page 30: How To Access The Web-Based Utility

    Voice Gateway with Router Voice • Info. This screen displays voice-related status information about the Voice Gateway. • System. Use this screen to configure the user password. • User 1. Use this screen to configure call forward, speed dial, supplementary service, and ring settings for the Internet phone line.

  • Page 31: The Router Tab

    The Router Tab The Router - Status Screen This screen displays product and system information. Product Information Product Name. Shown here is the model number of the Voice Gateway. Serial Number. Shown here is the serial number of the Voice Gateway. Software Version.
  • Page 32 Voice Gateway with Router Current IP. Displayed here is the Internet IP address of the Voice Gateway. Host Name. Displayed here is the host name of the Voice Gateway. Domain. Displayed here is the domain name of the Voice Gateway. Current Netmask.

  • Page 33: Figure 6-3: Router - Wan Setup Screen

    The Router - WAN Setup Screen This screen lets you configure the Internet connection, MAC clone, remote management, QoS, VLAN, and optional settings. Information about your Internet connection type should be provided by your Internet Service Provider (ISP). If you do not have this information, contact your service provider. Internet Connection Settings Connection Type.
  • Page 34 Voice Gateway with Router PPPoE Service Name (optional). Enter the service name provided by your ISP. Optional Settings HostName. Enter the host name, if provided by your ISP. Domain. Enter the domain name, if provided by your ISP. Primary DNS. Enter the IP address of the primary DNS server. Secondary DNS (optional).
  • Page 35 Maximum Uplink Speed. Enter the maximum upload speed of your Internet connection. The default is 128Kbps. VLAN (Virtual Local Area Network) Settings Enable VLAN. VLAN (802.1Q) settings let you use the Voice Gateway in a virtual LAN environment. Select yes or no from the drop-down menu.

  • Page 36: Figure 6-6: Router - Lan Setup Screen

    Voice Gateway with Router The Router - LAN Setup Screen This screen lets you configure the local network, dynamic DHCP, and static DHCP lease settings. Networking Service. Select the service you want to use, NAT or Bridge. The default is NAT. LAN Network Settings LAN IP Address.
  • Page 37 Host MAC Address. Enter the MAC address of the device whose IP address you want to specify. Host IP Address. Enter the IP address you want to assign to the device, 192.168.0.x (x being a different number for each device you specify). When you have finished making changes, click the Submit All Changes button to save the changes, or click the Undo All Changes button to undo your changes.

  • Page 38: Figure 6-7: Router - Application Screen

    Voice Gateway with Router The Router - Application Screen This screen lets you configure port forwarding, DMZ, and reserved ports range settings. Port Forwarding Settings Enable. Select yes or no for each port forwarding entry, which defines a port range to be forwarded to a server.
  • Page 39 Miscellaneous Settings Multicast Passthru. Multicasting allows for multiple transmissions to specific recipients at the same time. If multicasting is permitted, then the Voice Gateway will allow IP multicast packets to be forwarded to the appropriate computers. Select the types of multicast transmissions to allow: Disabled (none), Inbound Only, Outbound Only, or Inbound and Outbound.

  • Page 40: The Voice Tab

    Voice Gateway with Router The Voice Tab The Voice - Info Screen This screen shows voice-related settings for the Voice Gateway. Product Information Product Name. Shown here is the model number of the Voice Gateway. Serial Number. Shown here is the serial number of the Voice Gateway. Software Version.

  • Page 41: Figure 6-9: Line 1 Status

    RTP Bytes Sent. Displayed here is the number of RTP bytes sent by the Voice Gateway. RTP Packets Recv. Displayed here is the number of RTP packets received by the Voice Gateway. RTP Bytes Recv. Displayed here is the number of RTP bytes received by the Voice Gateway. SIP Messages Sent.
  • Page 42 Voice Gateway with Router Last Called Number. Displayed here is the last number called. Last Caller Number. Displayed here is the number of the last caller. Mapped SIP Port. Shown here is the port number of the NAT mapped SIP port. Calls 1 and 2 have the same status information available.

  • Page 43: Figure 6-10: Pstn Line Status

    Call 1/2 Packets Recv. Displayed here is the number of packets received. Call 1/2 Bytes Sent. Displayed here is the number of bytes sent. Call 1/2 Bytes Recv. Displayed here is the number of bytes received. Call 1/2 Decode Latency. Displayed here is the number of milliseconds for decoder latency. Call 1/2 Jitter.
  • Page 44 Voice Gateway with Router Next Registration In. Shown here is the number of seconds until the next registration. Last Called VoIP Number. VoIP stands for Voice over Internet Protocol, which is used by Internet phone calls. Displayed here is the last Internet phone number called from the landline. Last Called PSTN Number.
  • Page 45 VoIP Peer Name. Displayed here is the name of the party at the VoIP call leg. PSTN Peer Name. Displayed here is the name of the party at the PSTN call leg. VoIP Peer Number. Displayed here is the phone number of the party at the VoIP call leg. PSTN Peer Number.
  • Page 46 Voice Gateway with Router VoIP Call Round Trip Delay. Displayed here is the number of milliseconds for delay. VoIP Call Packets Lost. Displayed here is the number of packets lost. VoIP Call Packet Error. Displayed here is the number of invalid packets received. VoIP Call Mapped RTP Port.

  • Page 47: Figure 6-11: Voice - System Screen

    The Voice - System Screen This screen lets you change the password for user access to the Web-based Utility. NOTE: If your ITSP supplied this password, you may not be able to change it. System Configuration User Password. Enter the password for the user. (By default, there is no password.) When you have finished making your change, click the Submit All Changes button to save the changes, or click the Undo All Changes button to undo your change.

  • Page 48: Figure 6-12: Voice - User 1 Screen

    Voice Gateway with Router The Voice - User 1 Screen This screen lets you configure the settings for the Internet phone line. Call Forward Settings Enter the call forwarding numbers you want to use. Cfwd All Dest. Enter the number for the Call Forward All Service feature (when you want to forward all calls). Cfwd Busy Dest.
  • Page 49 Cfwd Sel3 Dest. Enter the forward number for the Call Forward Selective 3 feature. Cfwd Sel4 Caller. Enter the caller number pattern to trigger the Call Forward Selective 4 feature. Cfwd Sel4 Dest. Enter the forward number for the Call Forward Selective 4 feature. Cfwd Sel5 Caller.
  • Page 50 Voice Gateway with Router Speed Dial Settings Speed Dial 2. Enter the target phone number (or URL) to assign to speed dial 2. Speed Dial 3. Enter the target phone number (or URL) to assign to speed dial 3. Figure 6-13: Speed Dial and Speed Dial 4.

  • Page 51: Figure 6-14: Distinctive Ring And Ring Settings

    CWCID Setting. Select whether you want to enable caller ID for call waiting, yes or no. The default is yes. Dist Ring Setting. Select whether you want to use the distinctive ring feature, yes or no. The default is yes. Message Waiting.
  • Page 52 Voice Gateway with Router Hold Reminder Ring. Select the ring pattern that will remind you of a call on hold when the phone is on-hook. Call Back Ring. Select the ring pattern for call back notification. Cfwd Ring Splash Len. Enter the duration of the ring splash when a call is forwarded. The range is 0 to 10.0 seconds.

  • Page 53: Figure 6-15: Voice - Pstn User Screen

    The Voice - PSTN User Screen This screen lets you configure the settings for the LINE port service, which can be a PSTN service or a second VoIP service. PSTN-To-VoIP Selective Call Forward Settings Enter the landline caller numbers that will be forwarded to specific Internet phone numbers. Cfwd Sel1 Caller.
  • Page 54 Voice Gateway with Router Cfwd Sel5 Dest. Enter the forward number for the Cfwd Sel5 Caller. If this is blank, then the landline caller is blocked for Internet phone service. Cfwd Sel6 Caller. Enter the caller number pattern that will be forwarded to the Cfwd Sel6 Dest number. Cfwd Sel6 Dest.

  • Page 55: Figure 6-17: Pstn Ring Thru Line 1 Distinctive Ring Settings

    Speed Dial 6. Enter the target phone number to assign to speed dial 6. Speed Dial 7. Enter the target phone number to assign to speed dial 7. Speed Dial 8. Enter the target phone number to assign to speed dial 8. Speed Dial 9.

  • Page 56: Figure 6-18: Pstn Ring Thru Line 1 Ring Settings

    Voice Gateway with Router PSTN Ring Thru Line 1 Ring Settings This ring tone will be used to ring through Line 1. Figure 6-18: PSTN Ring Thru Line 1 Ring Settings Default Ring. Select the default ringing pattern for all callers. If you select Follow Line 1, then the ring selection will be determined by Line 1’s distinctive ring settings.

  • Page 57: Appendix A: Troubleshooting

    Appendix A: Troubleshooting This appendix provides solutions to problems that may occur during the installation and operation of the Voice Gateway. Read the description below to solve your problems. If you can't find an answer here, check the website of your Internet Telephony Service Provider (ITSP) or the Linksys website at www.linksys.com. Common Problems and Solutions 1.
  • Page 58 Voice Gateway with Router C. Click Tools. Click Internet Options. Click the Security tab. Click the Default level button. Make sure the security level is Medium or lower. Then click the OK button. 3. I need to set a static IP address on a PC. The Voice Gateway, by default, assigns an IP address range of 192.168.0.100 to 192.168.0.150 using the DHCP server on the Voice Gateway.
  • Page 59 For Windows 2000: A. Click Start, Settings, and Control Panel. Double-click Network and Dial-Up Connections. B. Right-click the Local Area Connection that is associated with the Ethernet adapter you are using, and select the Properties option. C. In the Components checked are used by this connection box, highlight Internet Protocol (TCP/IP), and click the Properties button.
  • Page 60 Voice Gateway with Router D. In the This connection uses the following items box, highlight Internet Protocol (TCP/IP). Click the Properties button. E. Enter a unique IP address that is not used by any other computer on the network connected to the Voice Gateway.
  • Page 61 4. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window. 5. Restart the computer if asked. 6. Click the OK button in the Internet Protocol (TCP/IP) Properties window, and click the OK button in the Local Area Connection Properties window.
  • Page 62 Voice Gateway with Router • If you do NOT get a reply, check the cable, and make sure Obtain an IP address automatically is selected in the TCP/IP settings for your Ethernet adapter. D. In the command prompt, type ping followed by your Internet IP address and press the Enter key. The Internet IP Address can be found in the web interface of the Voice Gateway.
  • Page 63 E. Make sure the cable connecting from your cable or DSL modem is connected to the Voice Gateway’s Internet port. Verify that the Router - Status page of the Voice Gateway’s Web-based Utility shows a valid IP address from your ISP. F.
  • Page 64 Voice Gateway with Router D. Enter the port range of the service you are using. For example, if you have a web server, you would enter the range 80 (in the Starting Port field) to 80 (in the Ending Port field). E.
  • Page 65 information on what port services to use is to go to the website of the online game or application you want to use. Follow these steps to set up online game hosting or use a certain Internet application: A. Access the Voice Gateway’s Web-based Utility by going to http://192.168.0.1 or the IP address of the Voice Gateway.
  • Page 66 Voice Gateway with Router 9. I can’t get the Internet game, server, or application to work. If you are having difficulties getting any Internet game, server, or application to function properly, consider exposing one PC to the Internet using DeMilitarized Zone (DMZ) hosting. This option is available when an application requires too many ports or when you are not sure which port services to use.
  • Page 67 For Microsoft Internet Explorer 5.0 or higher: A. Click Start, Settings, and Control Panel. Double-click Internet Options. B. Click the Connections tab. C. Click the LAN settings button and remove anything that is checked. D. Click the OK button to go back to the previous screen. E.

  • Page 68: Frequently Asked Questions

    Voice Gateway with Router Frequently Asked Questions Can I make calls if my Internet connection is down? When you make Internet phone calls, your high-speed Internet connection must be active. However, you can make calls using your landline. Can I make calls while I’m browsing the Internet? Yes.
  • Page 69 accounts, such as DSL or cable modems, when only one TCP/IP address is provided by the ISP. The user may have many private addresses behind this single address provided by the ISP. Does the Voice Gateway support any operating system other than Windows 98, Millennium, 2000, or XP? Yes, but Linksys does not, at this time, provide technical support for setup, configuration or troubleshooting of any non-Windows operating systems.
  • Page 70 Voice Gateway with Router How do I get Half-Life: Team Fortress to work with the Voice Gateway? The default client port for Half-Life is 27005. The computers on your LAN need to have “+clientport 2700x” added to the HL shortcut command line; the x would be 6, 7, 8, and on up. This lets multiple computers connect to the same server.
  • Page 71 Navigator, click Edit, Preferences, Advanced, and Proxy. Make sure that Netscape Navigator is set to Direct connection to the Internet. What is DMZ Hosting? Demilitarized Zone (DMZ) allows one IP address (computer) to be exposed to the Internet. Some applications require multiple TCP/IP ports to be open.
  • Page 72 Voice Gateway with Router Appendix A: Troubleshooting Frequently Asked Questions...

  • Page 73: Appendix B: Finding The Mac Address And Ip Address For Your Ethernet Adapter

    Appendix B: Finding the MAC Address and IP Address for Your Ethernet Adapter This section describes how to find the MAC address for your computer’s Ethernet adapter so you can use the MAC address cloning feature of the Voice Gateway. You can also find the IP address of your computer’s Ethernet adapter.

  • Page 74: Windows 2000 Or Xp Instructions

    Voice Gateway with Router Windows 2000 or XP Instructions 1. Click Start and Run. In the Open field, enter cmd. Press the Enter key or click the OK button. 2. At the command prompt, enter ipconfig /all. Then press the Enter key. 3.

  • Page 75: Appendix C: Windows Help

    Windows Help and are described in this appendix. TCP/IP Before a computer can communicate with a network router, TCP/IP must be enabled. TCP/IP is a set of instructions, or protocol, all PCs follow to communicate over a network. This is true for wireless networks as well.
  • Page 76 Voice Gateway with Router Appendix C: Windows Help...

  • Page 77: Appendix D: Glossary

    Voice Gateway with Router Appendix D: Glossary This glossary contains some basic networking terms you may come across when using this product. For more advanced terms, see the complete Linksys glossary at http://www.linksys.com/glossary. Bandwidth - The transmission capacity of a given device or network. Bit - A binary digit.
  • Page 78 Voice Gateway with Router DNS (Domain Name Server) - The IP address of your ISP's server, which translates the names of websites into IP addresses. Domain - A specific name for a network of computers. Download - To receive a file transmitted over a network. DSL (Digital Subscriber Line) - An always-on broadband connection over traditional phone lines.
  • Page 79 Voice Gateway with Router IPCONFIG - A Windows 2000 and XP utility that displays the IP address for a particular networking device. ISP (Internet Service Provider) - A company that provides access to the Internet. LAN - The computers and networking products that make up your local network. MAC (Media Access Control) Address - The unique address that a manufacturer assigns to each networking device.
  • Page 80 Voice Gateway with Router Server - Any computer whose function in a network is to provide user access to files, printing, communications, and other services. SMTP (Simple Mail Transfer Protocol) - The standard e-mail protocol on the Internet. SNMP (Simple Network Management Protocol) - A widely used network monitoring and control protocol. Static IP Address - A fixed address assigned to a computer or device that is connected to a network.

  • Page 81: Appendix E: Specifications

    Appendix E: Specifications Model SPA3102 Data Networking MAC Address (IEEE 802.3) IPv4 - Internet Protocol v4 (RFC 791) upgradeable to v6 (RFC 1883) ARP - Address Resolution Protocol DNS - A Record (RFC 1706), SRV Record (RFC 2782) DHCP Client - Dynamic Host Configuration Protocol (RFC 2131)
  • Page 82 Voice Gateway with Router Voice Gateway SIPv2: Session Initiation Protocol v2 (RFC 3261, 3262, 3263, 3264) SIP Support in Network Address Translation Networks - NAT (incl. STUN) Secure (Encrypted) Calling via Pre-Standard Implementation of Secure RTP Codec Name Assignment Voice Algorithms G.711 (A-law and µ-law) G.726 (16/24/32/40 kbps) G.729 A...
  • Page 83 VMWI - via FSK Polarity Control Hook Flash Event Signaling Caller ID Generation (Name & Number) - Bellcore, DTMF, ETSI Music on Hold Client Streaming Audio Server - up to 10 sessions Security Password Protected System Reset to Factory Default Password Protected Admin and User Access Authority Provisioning/Configuration/Authentication: HTTP Digest - Encrypted Authentication via MD5 (RFC 1321)
  • Page 84 Voice Gateway with Router Physical Interfaces 2 100baseT RJ-45 Ethernet Port (IEEE 802.3) -- 1 WAN, 1 LAN 1 RJ-11 FXS Phone Ports - For Analog Circuit Telephone Device (Tip/Ring) 1 RJ-11 FXO Phone Ports - For a Telco or PBX Connection Ring Voltage: 40-55 VRMS Configurable Subscriber Line Interface Circuit (SLIC)
  • Page 85 Documentation Quick Installation and Compliance Guide User Guide Administration Guide - Service Providers Only Provisioning Guide - Service Providers Only Dimensions 3.98" x 3.98" x 1.10" (W x H x D) (101 x 101 x 28 mm) Unit Weight 5.11 oz. (0.145 kg) Operating Temp.
  • Page 86 Voice Gateway with Router Appendix E: Specifications...

  • Page 87: Appendix F: Warranty Information

    Voice Gateway with Router Appendix F: Warranty Information This Warranty is valid and may be processed only in the country of purchase. Contact your service provider if the warranty support issues are to be handled by them as per your service agreements. Linksys warrants to You that, for a period of two years (the “Warranty Period”), your Linksys Product will be substantially free of defects in materials and workmanship under normal use.
  • Page 88 Voice Gateway with Router provided under this Agreement fails of its essential purpose. Some jurisdictions do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to You. Please direct all inquiries to: Linksys, P.O. Box 18558, Irvine, CA 92623. Appendix F: Warranty Information...

  • Page 89: Appendix G: Regulatory Information

    Appendix G: Regulatory Information FCC Statement This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio communications.
  • Page 90 Voice Gateway with Router The REN is useful to determine the quantity of devices that may be connected to the telephone line and still have all of those devices ring when your telephone number is called. In most, but not all areas, the sum of RENs should not exceed 5. To be certain of the number of devices that may be connected to the line, as determined by the total RENs, contact the telephone company to determine the maximum REN for the calling area.
  • Page 91 Industry Canada (Canada) This device complies with Industry Canada ICES-003 rule. Cet appareil est conforme à la norme NMB003 d'Industrie Canada. EC Declaration of Conformity (Europe) In compliance with the EMC Directive 89/336/EEC, Low Voltage Directive 73/23/EEC, and Amendment Directive 93/68/EEC, this product meets the requirements of the following standards: •...
  • Page 92 Voice Gateway with Router User Information for Consumer Products Covered by EU Directive 2002/96/EC on Waste Electric and Electronic Equipment (WEEE) This document contains important information for users with regards to the proper disposal and recycling of Linksys products. Consumers are required to comply with this notice for all electronic products bearing the following symbol: Appendix G: Regulatory Information...
  • Page 93 Voice Gateway with Router Appendix G: Regulatory Information...
  • Page 94 Voice Gateway with Router Appendix G: Regulatory Information...
  • Page 95 Voice Gateway with Router Appendix G: Regulatory Information...
  • Page 96 Voice Gateway with Router Appendix G: Regulatory Information...

  • Page 97: Appendix H: Contact Information

    Appendix H: Contact Information Internet Telephony Service Provider (ITSP) For support, contact your ITSP. Linksys Visit Linksys online for information on the latest products and updates to your existing products at: Appendix H: Contact Information Internet Telephony Service Provider (ITSP) Voice Gateway with Router http://www.linksys.com...
  • Page 98 Voice Gateway with Router Appendix H: Contact Information Linksys...
  • Page 100 www.linksys.com...

Table of Contents

Save PDF