Summary of Contents for Quikpoint Model 3
- Page 1 Operator’s Manual LIGHTNING GROUTER Quikpoint , Inc. 23 Bradford St. Concord, Ma. 01742 www.quikpoint.com Model 3...
-
Page 2: Accessories Parts
Read and save all instructions for future use. KNOW YOUR POWER TOOL. Read this manual carefully and the drill manual, for the drill, used with this Quikpoint Lightning Grouter. Do NOT PUT HANDS in hopper while tool is plugged in or connected to a DC Drill. - Page 3 Out of the Box Assembly Step 1 Push the “Drive Shaft ”, into the “Wiper Coupling assembly”, with the at facing the Set Screw. Then tighten the socket set screw with the Allen Wrench. Flat Wiper Coupling assembly Drive Shaft Step 2 Push the Drive Shaft -Auger Assembly into the Collar...
-
Page 4: Parts List
Parts List 16. 1/4” Washer (4) 1. Tube 17. U-Bracket 2. Handle 18. 1/4-20 X1” Arm Bolts (4) 2A. 4 1/2 “ Handle Ring Clamp 19. Bearing 3. Cap 20. Collar with Socket screw 4. Wheel Holder 21. 1/4” Wing Nut (5) 5. -
Page 5: Loading And Operation
Loading and Operation For ease of handling ,We recommend loading the Grouter to a level no higher than the To Load the Grouter, Use the included 16oz Scoop (#36). Top of the yellow label. Hold the Grouter as shown. We recommend elevating the Mortar tray for easier loading. - Page 6 Cleaning To Clean, pour water into the Grouter and run the drill in forward and reverse. Add water until the water is clear coming out of the nozzle. Clean all (mating) surfaces in the Nozzle Holder , Steel Nozzle, Nozzle Retainer and Auger Barrel. If all surfaces are not cleaned the Allen Wrench Key will not secure the Nozzle Holder correctly to the Auger Barrel.
- Page 7 4 Wheel Con gurations. Wheel Holder(#4) Wing Nut Right or Left placement. 1.25” 0 Washer (#7) Oversized white bushings in these positions. 2.25” Bolt + 4” Bolt + 1.5” Bolt + 2.75” Bolt + Wheel Bushing (#8) 3 Washers 6 Washers +5 Bushings 2 Washers 4 Washers U-Blade positioned against the...
- Page 8 MORTAR MIXES The Quikpoint Grouter works well with all standard U.B.C.(universal building code) mortar mixes up tp 2 1/2 ne sand by volume to one part by volume of the cements plus lime used. Example of a 2 1/2 to 1 Mix...
- Page 9 IF THE QUIKPOINT GROUTER IS LABORING OR PLUGGING it is HIGHLY RECOMENDED with any mortar mix to use the GIBO’S-MRF additive...
-
Page 11: Troubleshooting
TROUBLE SHOOTING 1. The Drill is turning but the Grouter is not delivering mortar out of the Nozzle. A. Make sure the drill is in forward rotation. The tool will not deliver mortar in reverse. B. Make sure set screws on the Wiper Coupling, Blade-Coupling and Collar are tight. C. - Page 12 LIMITED WARRANTY This product is warranted by Quikpoint Inc. to the original purchaser to be free from defects in material and workmanship under normal use for a period of one year from the date of purchase. Every Quikpoint tool is thoroughly inspected and tested before leaving our manufacturing facilities.