Related Manuals for Sanyo UF103450P-NETE-5
Summary of Contents for Sanyo UF103450P-NETE-5
- Page 3 2/13 1. Extent of the application This specification is applied to the SANYO Lithium Ion Battery of UF103450P-NETE-5, used for PDA , and supplied to Nexcon Technology Co., Ltd.. 2. Battery Classification and Type 2.1 Battery Classification SANYO Lithium Ion Battery 2.2 Battery Type...
- Page 4 4.2②. 45min. or more Then next discharge time is measured as specified in paragraph 4.2 ②. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849 Portable Rechargeable Battery Business Group Lithium-Ion Battery Business Unit...
-
Page 5: Standard Test Conditions
The cell shall be shipped in about 30% charged state. It is not specified more than 30% capacity remain at Nexcon Technology Co., Ltd., because of self discharge. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849 Portable Rechargeable Battery Business Group... - Page 6 ･ Make the shape and mechanism which can inspect protection circuit function (specified paragraph 8-2②) before the battery pack makes completely. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849 Portable Rechargeable Battery Business Group...
- Page 7 ･ Weld mold case by glue. Not weld mold case by ultra sonic welding. If the ultra sonic is used for welding of mold cases, SANYO will not accept any responsibility for any defects. ･ Make the structure where the end user cannot remove the pack easily.
- Page 8 ･ In case of long period storage, store the cell at temperature range -20~+20℃, low humidity(less than 70%RH), no corrosive gas atmosphere. And in this case, charge condition of the cell is SANYO shipment charge state or discharge state. ･ No condensation on the cell.
- Page 9 8/13 11. Exemption from Warrantee ･ SANYO will not be responsible for trouble occurred by handling outside of the precautions in this specification. ･ SANYO will not be responsible for trouble occurred by matching electric circuit, battery pack, PDA and charger.
- Page 10 "Do not connect battery to the plug socket or car-cigarette-plug" Added high voltage to the battery, the excessive current will flow in it and then it will cause the generating heat, smoke, rupture or flame. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849...
- Page 11 If the protection circuit to avoid the danger works under high temperature or it is broken, the battery will be charged at abnormal current (or voltage) and abnormal chemical reaction will occur. It causes the generating heat, smoke, rupture or flame. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849...
- Page 12 "Do not pack battery unstable" Please fix the battery stable and pack in case, if the battery is transported. It will cause the deterioration, damage or short of the battery. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849 Portable Rechargeable Battery Business Group...
- Page 13 10. Insulation Please insulate exposed lead wire and metal terminals by vinyl tape and so on. It may cause the generating heat, rapture and flame because of battery short. Energy Company, SANYO Electric Co., Ltd. File No UF103450-849 Portable Rechargeable Battery Business Group...
- Page 14 The warranty period of a cell is for one year after shipment. However, if a cell causes unusual operation within this period, SANYO will replace by a new cell for free as long as it is clear that the cause of the failure is in the cell manufacturing process and the cell has not been used in the abnormal condition.