Sony SRS-XB13 Connecting Manual

Hide thumbs Also See for SRS-XB13:

Download this manual

7/19/22, 8:21 PM

Wireless Speaker

SRS-XB13

Pairing and connecting with BLUETOOTH

Pairing is the process required to mutually register the information on BLUETOOTH devices

to be connected wirelessly.

To pair with a second or subsequent BLUETOOTH device, perform the following pairing

procedure for each device.

Before operating the speaker, be sure to do the following:

Place the BLUETOOTH device within 1 m (3.2 ft) of the speaker.

Connect the speaker to an AC outlet via a USB AC adaptor (commercially available). Or

charge the built-in battery sufficiently.

To avoid any sudden loud sound output from the speaker, turn down the volume of both

the BLUETOOTH device and the speaker or stop music playback.

Depending on the BLUETOOTH device, the volume of the device may be synchronized

with the speaker.

Prepare the operating instructions supplied with the BLUETOOTH device for reference.

Turn on the speaker.

Check the status of the (BLUETOOTH) indicator.

When the indicator is double flashing

https://helpguide.sony.net/speaker/srs-xb13/v1/en/contents/TP1000198317.html

SRS-XB13 | Help Guide | Pairing and connecting with BLUETOOTH® devices

devices

1/5

Page 1 7/19/22, 8:21 PM SRS-XB13 | Help Guide | Pairing and connecting with BLUETOOTH® devices Wireless Speaker SRS-XB13 ® Pairing and connecting with BLUETOOTH devices Pairing is the process required to mutually register the information on BLUETOOTH devices to be connected wirelessly.
Page 2 7/19/22, 8:21 PM SRS-XB13 | Help Guide | Pairing and connecting with BLUETOOTH® devices After you pair the speaker with a BLUETOOTH device for the first time since purchase or initialize the speaker (the speaker has no pairing information), the speaker automatically enters pairing mode when it is turned on.
Page 3 7/19/22, 8:21 PM SRS-XB13 | Help Guide | Pairing and connecting with BLUETOOTH® devices To reconnect to the BLUETOOTH device that has been registered (paired), proceed to step . The speaker will automatically be connected just by turning on the BLUETOOTH function on the BLUETOOTH device.