Table of Contents
Advertisement
Available languages
Available languages
A
P
UXILIARY
ORT
If a key has been programmed with the AUX A or AUX B function, you can press
that key to turn the Auxiliary Port on and off.
• When Auxiliary Port A is activated, the AUX A indicator (
display.
• When Auxiliary Port B is activated, the AUX B indicator (
display.
GPS R
EPORT
If a GPS unit (NMEA-0183 format) is installed on your transceiver and the Send
the GPS Data function has been programmed onto a key by your dealer, press
the Send the GPS Data key to send your location data.
H
A
OME
DDRESS
If a key has been programmed with the Home Address function, you can press
that key to jump to the pre-programmed call address.
• "HAD" appears in the sub-display when the selected call address is the Home Address
Press Home Address a second time to return to the previous call address you
were using.
S
L
ITE
OCK
Press and hold this key for 1 second to lock the Site. "SITE LOCKED" momentarily
appears on the display. Press and hold this key again for 1 second to cancel Site
Lock.
S
-LCD D
UB
ISPLAY
If a key has been programmed with the Sub-LCD Display function, you can press
that key to toggle the sub-display between "SVC", the current control channel
number, and the signal strength readout.
S
C
WITCHING TO
ONVENTIONAL
Depending on how your transceiver is programmed, you can enter Conventional
Mode in one of two ways:
Manual: When in Trunking Mode, press the key programmed as Conventional
to change the operating mode. This function only works when no signals are
currently being received.
Auto: The transceiver automatically changes to Conventional Mode when you are
outside the network area.
M
ODE
) appears on the
) appears on the
15
Advertisement
Chapters
Table of Contents
