Table of Contents
Advertisement
Operation Manual / TPS44-H.. - TPS52-H..
8 Periodic maintenance work / 8.2 Cleaning components mechanically
8.2.2
Cleaning the filter silencer
Fig. 19: Cleaning the filter silencer
81135
Filter silencer body
81136
Absorption segment
81137
Sheet-metal covering
81265
Filter ring
Cleaning the filter ring (if present)
Remove filter ring (81265).
u
Clean filter ring (81265) as required or every 500 hours of operation and replace after the
u
fifth cleaning process at the latest.
Contamination of the filter ring depends on the degree of purity of the sucked-in air.
Rinse the filter ring (81265) with water and mild detergent or, in the case of heavy con-
u
tamination, soak and carefully push through. Rinse in cold water. Avoid high mechanical
loads (water jet).
Let the filter ring dry completely before assembling.
u
Dirty water and mild detergent must be disposed of in compliance with locally applicable
u
regulations.
Cleaning the absorption segments
(see Fig. 19: Cleaning the filter silencer →54)
Loosen the tension bands (81270).
u
Remove the cover grid (81266).
u
Pull out and bend up the sheet-metal coverings (81137), and remove the absorption seg-
u
ments (81136).
© Copyright 2021 ABB. All rights reserved.
81266
Cover grid
81270
Tension band
81271
Lock
HZTL4037_EN
Rev.G
June 2021
Advertisement
Chapters
Table of Contents
