Table of Contents
Advertisement
7
Maintenance and Safety Inspection
7.1
Daily Inspection
7.1.1 Visually inspect the surface of the probe head, housing,
cable and connector for any crack, scratch or
denaturalization. If you find any damage, do not use the
probe and contact a service support immediately.
7.1.2 Visually inspect the surface of the Magnetic sensor
attachment and the Spacer for EZU-RV2S for any crack,
deformation or denaturalization. If you find any damage,
do not use them and contact a service support.
7.2
Storage
After using the probe and accessory, they should be cleaned
and disinfected/sterilized according to "5. Cleaning, Disinfection
and Sterilization" and "6.Cleaning, Disinfection and Sterilization of
EZU-PA3U" immediately. Then store them in a cool and dark place
avoid high temperature and humidity direct sunlight.
- 42 -
Q1E-EP1357
Advertisement
Table of Contents
