Lenovo 3000 V100 0763 Supplementary Manual page 40

Lenovo 3000 v100 0763: supplementary guide

Hide thumbs Also See for 3000 V100 0763:

Table of Contents

Replacing memory

2. Turn off the computer; then disconnect the ac adapter and all cables

3. Close the computer display, and turn the computer over.

4. Remove the battery.

5. Unfasten the two screws 1 on the cover of the memory slot, and

6. If the SO-DIMM is already installed in the memory slot, remove it to

7. Find the notch on the contact edge side of the SO-DIMM.

Lenovo 3000 V100 Service and Troubleshooting Guide

from the computer.

remove the cover 2 .

make room for the new one by pressing out on the latches on both edges

of the socket at the same time. Be sure to save it for future use.

Attention: To avoid damaging the SO-DIMM, do not touch its contact

edge.

Table of Contents

3000 v100