hit counter script
Panasonic i-Pro WV-SFN130PJ Operating Instructions Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Security Camera
  5. i-Pro WV-SFN130PJ
  6. Operating instructions manual

Panasonic i-Pro WV-SFN130PJ Operating Instructions Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
WV-SFV130
Before attempting to connect or operate this product, please read these instructions
carefully and save this manual for future use.
The model number is abbreviated in some descriptions in this manual.
Operating Instructions
Network Camera
Model No.
WV-SFN130PJ
WV-SFN130
WV-SFV130
WV-SFV110
WV-SFV130M
WV-SFV110M
WV-SFN130
WV-SFN110

Advertisement

Table of Contents
loading

Related Manuals for Panasonic i-Pro WV-SFN130PJ

Summary of Contents for Panasonic i-Pro WV-SFN130PJ

  • Page 1 Operating Instructions Network Camera WV-SFV130 Model No. WV-SFV110 WV-SFV130M WV-SFV110M WV-SFN130 WV-SFN130PJ WV-SFN110 WV-SFV130 WV-SFN130 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. The model number is abbreviated in some descriptions in this manual.
  • Page 2 Preface Preface About the user manuals There are 2 sets of operating instructions as follows. • Operating Instructions (this document) : Explains how to perform the settings and how to operate this camera. • Installation Guide: Explains how to install and connect devices. The screens used in these operating instructions show the case of WV-SFV130.
  • Page 3 Preface For administrator registration At the time of first access to the camera (or at the time of initialization), the registration screen will be displayed. [User name (1 to 32 characters)] Enter the user name of the administrator. Available number of characters: 1 - 32 characters Unavailable characters: 2-byte characters, and 1-byte symbols "...
  • Page 4 Preface When the camera is reconnected to, an authentication window is displayed. Enter the registered user name and password to start operation. Viewer software It is necessary to install the viewer software “Network Camera View 4S” (ActiveX ) to display images on a PC. ®...

  • Page 5: Table Of Contents

    Table of Contents Table of Contents 1 Monitor images on a PC ................8 Monitor images from a single camera ................8 About the “Live” page ....................10 Monitor cropping images ....................14 Monitor images from multiple cameras ................17 2 Monitor images on a cellular phone/mobile terminal ......18 Monitor images on a cellular phone ................18 Monitor images on a mobile terminal ................19 3 Record images on the SD memory card manually ......22...
  • Page 6 Table of Contents 10.6 Access copy images saved on the SD memory card onto the PC [SD memory card images] ..........................68 10.7 Configure the directory of the PC that images will be downloaded to [Log] ....70 11 Configure the settings relating to images and audio [Image/ Audio] ......................72 11.1 Configure the settings relating to the image capture mode [JPEG/H.264] ....72...
  • Page 7 Table of Contents 16.2.1 Configure the settings related to sending E-mails ............135 16.2.2 Configure the settings related to FTP transmission .............138 16.2.3 Configure the settings relating to the NTP server ............141 16.2.4 Configure the UPnP settings ..................143 16.2.5 Configure the HTTPS settings ..................144 16.2.6 Configure the settings relating to DDNS ..............146 16.2.7...

  • Page 8: Monitor Images On A Pc

    1 Monitor images on a PC 1 Monitor images on a PC The following are descriptions of how to monitor images from the camera on a PC. 1.1 Monitor images from a single camera Start up the web browser. Enter the IP address designated using the “IP Setting Software” in the address box of the browser. •...
  • Page 9 1 Monitor images on a PC Press the [Enter] key on the keyboard. → The “Live” page will be displayed. Refer to page 10 for further information about the “Live” page. When “On” is selected for “User auth.”, the authentication window will be displayed before displaying live images for the user name and password entries.

  • Page 10: About The "Live" Page

    1 Monitor images on a PC 1.2 About the “Live” page ⑭ ⑱ ⑲ ⑳ ⑯ ⑰ ⑮ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ⑫ ⑬ [select language] pull-down-menu The camera’s display language can be selected. The default language can be set in the [Language] in the [Basic] settings.
  • Page 11 1 Monitor images on a PC Aspect ratio of [1280x960] The letters “1280x960” will turn green and images in the “4:3” main area will be displayed in 1280 x 960 (pixels). [800x600] The letters “800x600” will turn green and images in the main area will be displayed in 800 x 600 (pixels).
  • Page 12 1 Monitor images on a PC [Brightness] buttons The brightness is adjustable from 0 to 255. • (darker) button: Images become darker. • button: The adjusted brightness will return to the default brightness (64). • (brighter) button: Images become brighter. [Cropping] display Cropping setup display is only displayed when the images set in “Cropping”...
  • Page 13 1 Monitor images on a PC Note • For the case of using Windows 8 or Windows 7, the following settings may be required. Open Internet Explorer, click [Tools] ® [Internet Options] ® [Security] ® [Trusted Sites] ® [Sites]. Register the camera address on [Website] of the displayed trusted windows. After registration, close the web browser, and then access the camera again.

  • Page 14: Monitor Cropping Images

    1 Monitor images on a PC 1.3 Monitor cropping images Full angle images and cropping images can be transmitted at the same time. The cropping function must be configured in order to transmit cropping images. (®page 122) Either one of H.264(1), H.264(2), H.264(3), H.264(4), JPEG(1), JPEG(2), or JPEG(3) images or all of H. 264(1), H.264(2), H.264(3), and H.264(4) images can be set as cropping images.
  • Page 15 1 Monitor images on a PC Sequence display using the cropping function By selecting the cropping areas for alarm actions, the area you want to monitor (home area) when alarm occurs can be displayed. Sequence display using the alarm action cropping function Operating Instructions...
  • Page 16 1 Monitor images on a PC Alarm occurrence Time while the cropping area is displayed Note • Alarm action cropping can only be used when a setting other than “H.264(all)” is selected for “Cropping”. (®page 122) Operating Instructions...

  • Page 17: Monitor Images From Multiple Cameras

    1 Monitor images on a PC 1.4 Monitor images from multiple cameras Images from multiple cameras can be displayed on a multi-screen. Images from 4 cameras (up to 16 cameras) can be displayed simultaneously. To display images on a multi-screen, it is necessary to register cameras in advance.

  • Page 18: Monitor Images On A Cellular Phone/Mobile Terminal

    2 Monitor images on a cellular phone/mobile terminal 2 Monitor images on a cellular phone/mobile terminal 2.1 Monitor images on a cellular phone It is possible to connect to the camera using a cellular phone via the Internet and monitor images (JPEG only) from the camera on the screen of the cellular phone.

  • Page 19: Monitor Images On A Mobile Terminal

    2 Monitor images on a cellular phone/mobile terminal IMPORTANT • Transmission will be periodically performed when “Auto Refresh” is selected for the camera image. Confirm the contract plan of the cellular phone in use before using this function. • Depending on the cellular phone in use, “Auto Refresh” may be unavailable. Resolution control Changes the image capture size by pressing the dial key “0”.
  • Page 20 2 Monitor images on a cellular phone/mobile terminal Note • It is necessary to configure the network settings of the mobile terminal in advance to connect to the Internet and monitor images from the camera. (®page 130) Access to “http://IP address/cam” or “http://Host name registered in the DDNS server/cam”...
  • Page 21 2 Monitor images on a cellular phone/mobile terminal • Depending on the mobile terminal in use or its contract plan, it may be impossible to access. IP address is the global WAN IP address of the router that can be accessed via the Internet. However, when accessing the same LAN as the camera with a wireless compatible mobile terminal, the IP address is the local IP address.

  • Page 22: Record Images On The Sd Memory Card Manually

    3 Record images on the SD memory card manually 3 Record images on the SD memory card manually Images displayed on the “Live” page can be recorded on the SD memory card manually. This button is operable only when “Manual” is selected for “Save trigger” on the [SD memory card] tab on the “Basic” page of the setup menu.
  • Page 23 3 Record images on the SD memory card manually • When the [Start] button is clicked immediately after the [Stop] button is clicked, saving of images may not start. In this case, click the [Start] button again. Operating Instructions...

  • Page 24: Action At An Alarm Occurrence

    4 Action at an alarm occurrence 4 Action at an alarm occurrence The alarm action (camera action at an alarm occurrence) will be performed when the following alarms occur. 4.1 Alarm type • VMD alarm: When motion is detected in the set VMD area, the alarm action will be performed. *VMD stands for “Video Motion Detection”.
  • Page 25 4 Action at an alarm occurrence Notify of alarm occurrences to the designated addresses (TCP alarm notification) This function is available only when our device, such as the network disk recorder, is connected to the system. When “On” is selected for “TCP alarm notification”, the connected our device will be notified that the camera is in the alarm state.

  • Page 26: Transmit Images Onto An Ftp Server

    5 Transmit images onto an FTP server 5 Transmit images onto an FTP server Images can be transmitted to an FTP server. By configuring the following settings, transmission of images captured at an alarm occurrence or captured at a designated interval to an FTP server will become available. IMPORTANT •...

  • Page 27: Save Images On The Sd Memory Card When Images Fail To Transmit Using The Ftp Periodic Image Transmission Function

    5 Transmit images onto an FTP server image transmission function. Therefore, images may not be transmitted at the interval designated on the “FTP periodic image transmission” setting. 5.3 Save images on the SD memory card when images fail to transmit using the FTP periodic image transmission function Images that have failed to transmit using the FTP periodic image transmission can be saved automatically on the SD memory card.

  • Page 28: Display The Log List

    6 Display the log list 6 Display the log list The history of various logs will be displayed in list form. • Alarm log: Logs of the alarm occurrences such as time and date of the alarm occurrences, the image recording period and the alarm type will be displayed.
  • Page 29 6 Display the log list Click the [List/Play] button. → The log list will be displayed in a newly opened window (log list window). IMPORTANT • Only a single user can operate the log list window. Other users cannot access the log list window. Time Displays the time period of the data recorded on the SD memory card.
  • Page 30 6 Display the log list • Default: All Note • When “Stream 1” is selected for “Recording stream” and either “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Stream 1”, the FTP trans. error log will be displayed. Recording time Configure the time period of logs displayed on the log list. •...
  • Page 31 6 Display the log list – COM: Alarm by command alarm – AUD: Alarm by audio detection alarm – FTP: Logs saved from FTP periodic image transmission errors • [SD memory card]: Available capacity and the original capacity of the SD memory card will be displayed.

  • Page 32: Playback Of Images On The Sd Memory Card

    7 Playback of images on the SD memory card 7 Playback of images on the SD memory card When clicking a time and date listed on the log list window, the “Live” page will turn to the “Playback” page. When images associated with the clicked time and date are on the SD memory card, the first image of them will be displayed.
  • Page 33 7 Playback of images on the SD memory card When the [PLAY] button or the [REV PLAY] button is clicked during fast reverse playback, playback speed will return to the normal playback speed. [REV PLAY] button Images will be played in reverse sequential order. [PLAY] button When this button is clicked, images will be played in sequential order.
  • Page 34 7 Playback of images on the SD memory card Select the image to be downloaded, and then click the [OK] button. • All: All images saved at the selected time and date will be downloaded. • Current image: Only the currently displayed image will be downloaded. •...

  • Page 35: Playback "H.264(1)"/"H.264(2)"/"H.264(3)"/"H.264(4)" Images Saved To The Sd Memory Card

    7 Playback of images on the SD memory card 7.2 Playback “H.264(1)”/“H.264(2)”/“H.264(3)”/“H. 264(4)” images saved to the SD memory card IMPORTANT • Depending on the network environment, download of video data may fail. Slider bar By operating the slider bar, you can select where to start playing images from. The slider bar can only be used before playing images, or when playing is paused or stopped.
  • Page 36 7 Playback of images on the SD memory card Note • The maximum speed of the fast playback varies depending on the setting of “Max bit rate” - “H.264 recording” of the SD memory card. If any of the following also applies to “Transmission priority” or “Max bit rate (per client)”...

  • Page 37: About The Network Security

    8 About the network security 8 About the network security 8.1 Equipped security functions The following security functions are featured in this camera. Access restrictions by the host authentication and the user authentication It is possible to restrict users from accessing the camera by setting the host authentication and/or the user authentication to “On”.

  • Page 38: Display The Setup Menu From A Pc

    9 Display the setup menu from a PC 9 Display the setup menu from a PC The settings of the camera can be configured on the setup menu. IMPORTANT • The setup menu is only operable by users whose access level is “1. Administrator”. Refer to page 125 for how to configure the access level.
  • Page 39 9 Display the setup menu from a PC Click the [OK] button after entering the user name and the password. → The setup menu will be displayed. Refer to page 42 for further information about this menu. Operating Instructions...

  • Page 40: How To Operate The Setup Menu

    9 Display the setup menu from a PC 9.2 How to operate the setup menu ① ② Menu buttons Setup page Click the desired button in the frame on the left of the window to display the respective setup menu. When there are tabs at the top of the “Setup”...
  • Page 41 9 Display the setup menu from a PC <Example> When completing the setting items in field A, click the [Set] button (B) below field (A). The edited settings in field A will not be applied unless the [Set] button (B) below field (A) is clicked. In the same manner as above, click the [Set] button (D) below field C when completing the setting items in field C.

  • Page 42: About The Setup Menu Window

    9 Display the setup menu from a PC 9.3 About the setup menu window ① ⑫ ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑬ ⑨ ⑩ ⑪ [Setup] button Display the “Setup” page. [Live] button Display the “Live” page. [Basic] button Displays the “Basic”...
  • Page 43 9 Display the setup menu from a PC [Alarm] button Displays the “Alarm” page. The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence, the alarm occurrence notification, and the VMD area settings can be configured on the “Alarm”...

  • Page 44: Configure The Basic Settings Of The Camera [Basic]

    10 Configure the basic settings of the camera [Basic] 10 Configure the basic settings of the camera [Basic] The basic settings such as camera title, time and date, SD memory card and the logs can be configured on the “Basic” page. The “Basic” page has the [Basic] tab, the [Internet] tab, the [SD memory card] tab, and the [Log] tab.
  • Page 45 10 Configure the basic settings of the camera [Basic] [Camera title] Enter the title of the camera. Click the [Set] button after entering the title of the camera. The entered title will be displayed in the “Camera title” field. • Available number of characters: 0 - 20 characters •...
  • Page 46 10 Configure the basic settings of the camera [Basic] [Camera title on screen] Select “On” or “Off” to determine whether or not to display the camera title on the screen. When “On” is selected, the character string entered for “Camera title on screen (0-9, A-Z)” will be displayed at the position selected for “OSD”.
  • Page 47 10 Configure the basic settings of the camera [Basic] • Default: On [Upside-down] Select “On” or “Off” to determine whether or not to turn the image upside-down. • Default: Off [Mirror] Select “On” or “Off” to determine whether or not to turn the image over horizontally. •...

  • Page 48: Configure The Internet Settings [Internet]

    10 Configure the basic settings of the camera [Basic] IMPORTANT • It is impossible to display images and to receive audio between the camera and the PC when the viewer software “Network Camera View 4S” is not installed on the PC. •...
  • Page 49 10 Configure the basic settings of the camera [Basic] • The UPnP function is available when the camera is connected to the IPv4 network. IPv6 is not supported. • To check if auto port forwarding is properly configured, click the [Status] tab on the “Maintenance” page, and check that the “Enable”...
  • Page 50 10 Configure the basic settings of the camera [Basic] [Common] [Max RTP packet size]: Limited(1280byte) [HTTP max segment size(MSS)]: Limited(1280byte) Operating Instructions...

  • Page 51: Configure The Settings Relating To The Sd Memory Card [Sd Memory Card]

    10 Configure the basic settings of the camera [Basic] 10.3 Configure the settings relating to the SD memory card [SD memory card] Click the [SD memory card] tab on the “Basic” page. (®page 38, page 40) The settings relating to the SD memory card can be configured on this page. Operating mode [SD memory card] Select “Use”...
  • Page 52 10 Configure the basic settings of the camera [Basic] [Remaining capacity notification] When the E-mail notification function or the TCP alarm notification function is used to provide notification of the remaining capacity of the SD memory card, select a level to be notified at from the following. 50%/ 20%/ 10%/ 5%/ 2% •...
  • Page 53 10 Configure the basic settings of the camera [Basic] [Set] When an SD memory card with no configured password is inserted, a password can be configured using the [Set] button. [Password]/[Retype password] Enter the password. • Available number of characters: 4 - 16 characters •...
  • Page 54 10 Configure the basic settings of the camera [Basic] • Unlock: The lock function is disabled. • Password is set.: The password is configured correctly. • Error(Unsupported SD memory card): A card that does not support password lock is inserted. Check that an SDHC memory card or SDXC memory card is inserted.
  • Page 55 10 Configure the basic settings of the camera [Basic] – Recording stream 2: Off IMPORTANT • If an SD memory card with an SD Speed Class other than 10 is used, 2048x1536 cannot be selected for the image capture size of JPEG images. Set the maximum combined bit rate of “H.264(1)”, “H. 264(2)”, “H.264(3)”, and “H.264(4)”...
  • Page 56 10 Configure the basic settings of the camera [Basic] Note • When “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording format”, “FTP error” is unavailable. • When “JPEG(1)”, “JPEG(2)”, or “JPEG(3)” is selected for “Recording format”, “Schedule” is unavailable. JPEG recording(Manual) This setting is only available when “JPEG(1)”, “JPEG(2)”, or “JPEG(3)”...
  • Page 57 10 Configure the basic settings of the camera [Basic] 0.1fps/0.2fps/0.33fps/0.5fps/1fps • Default: 1fps [Image saving interval/Number of images to be saved(Pre alarm)] - [Number of images to be saved] Select a number of pre alarm images to be saved on the SD memory card from the following. Off/1pic/2pics/3pics/4pics/5pics •...
  • Page 58 10 Configure the basic settings of the camera [Basic] Indication Description --------MB/--------MB No SD memory card is inserted. Failed to obtain available capacity due to error, etc. ********MB/********MB The SD memory card is unformatted, or locked (write-protected). ########MB/########MB The password lock of the SD memory card cannot be removed. Note •...

  • Page 59: Configure The Settings Relating To Alteration Detection [Alteration Detection]

    10 Configure the basic settings of the camera [Basic] SD memory card images [Access img.] Images on the SD memory card can be obtained. Click the [Execute] button. Refer to page 68 for how to access images. 10.4 Configure the settings relating to alteration detection [Alteration detection] Selecting alteration detection enables detection using exclusive software when the data on the SD memory card is altered.

  • Page 60: How To Configure Alteration Detection Settings

    10 Configure the basic settings of the camera [Basic] To generate the self-signed certificate, click the [Execute] button to display the “Self-signed Certificate - Generate” dialog box. [Self-signed Certificate - Information] Displays the information of the self-signed certificate. When the [Confirm] button is clicked, the registered information of the self-signed certificate will be displayed in the “Self-signed Certificate - Confirm”...

  • Page 61: Generation Of The Crt Key (Encryption Key)

    10 Configure the basic settings of the camera [Basic] The alteration detection settings will be configured in the following procedure. Generation of the CRT key (encryption key) When using the self-signed certificate When using the certificate issued by CA Generation of the self-signed certificate Generation of CSR (Certificate Signing Request) Application for the approval by CA (Certificate Authority) - Issue of the certificate...

  • Page 62: Generation Of The Self-Signed Certificate (Security Certificate)

    10 Configure the basic settings of the camera [Basic] Note • To change (or update) the generated CRT key, perform step 1 to 2. The CRT key, self-signed certificate and certificate issued by CA are valid in a set. When the CRT key is changed, it is necessary to re-generate the self-signed certificate or re-apply for the certificate issued by CA.
  • Page 63 10 Configure the basic settings of the camera [Basic] Enter the information of the certificate to be generated. Item Description Available number of characters [Common Name] Enter the camera address or host name. 64 characters [Country] Enter the country name. (Omission is OK.) 2 characters (Country code) [State] Enter the state name.

  • Page 64: Generation Of Csr (Certificate Signing Request)

    10 Configure the basic settings of the camera [Basic] • When the [Confirm] button is clicked, the registered information of the self-signed certificate (security certificate) will be displayed in the “Self-signed Certificate - Confirm” dialog box. • When the [Delete] button is clicked, the generated self-signed certificate (security certificate) will be deleted.
  • Page 65 10 Configure the basic settings of the camera [Basic] Click the [Execute] button of “CA Certificate - Generate Certificate Signing Request”. → The “CA Certificate - Generate Certificate Signing Request” dialog box will be displayed. Enter the information of the certificate to be generated. Item Description Available number of characters...

  • Page 66: Installation Of The Certificate Issued By Ca

    10 Configure the basic settings of the camera [Basic] 10.5.4 Installation of the certificate issued by CA IMPORTANT • If the CSR file is not generated, it is impossible to install the certificate (security certificate) issued by • For the installation, the certificate issued by CA is required. Click the [Browse...] button of “CA Certificate - Certificate install”.

  • Page 67: Configuration Of Alteration Detection

    10 Configure the basic settings of the camera [Basic] 10.5.5 Configuration of alteration detection Select “On” for “Additional info for detecting alteration”, and click the [Set] button. Extensive information for alteration detection will be added to video files (MP4 format) recorded after changing the setting.

  • Page 68: Access Copy Images Saved On The Sd Memory Card Onto The Pc [Sd Memory Card Images]

    10 Configure the basic settings of the camera [Basic] 10.6 Access copy images saved on the SD memory card onto the PC [SD memory card images] Click the [SD memory card] tab on the “Basic” page. (®page 38, page 40) The following are descriptions of how to copy images saved on the SD memory card onto the PC.
  • Page 69 10 Configure the basic settings of the camera [Basic] Possible number of JPEG images that can be saved on the SD memory card (as indications) For possible numbers of JPEG images that can be saved on the SD memory card, refer to our website below. https://i-pro.com/global/en/surveillance/training-support/support/technical-information Possible duration of H.264 images that can be saved on the SD memory card (as indications)

  • Page 70: Configure The Directory Of The Pc That Images Will Be Downloaded To [Log]

    10 Configure the basic settings of the camera [Basic] 10.7 Configure the directory of the PC that images will be downloaded to [Log] Click the [Log] tab on the “Basic” page. (®page 38, page 40) The directory of the PC that images recorded on the SD memory card will be downloaded to can be configured in this section.
  • Page 71 10 Configure the basic settings of the camera [Basic] Note • Schedule saving is available only when “H.264(1)”, “H.264(2)”, “H.264(3)”, or “H.264(4)” is selected for “Recording format”. FTP error The settings related to the directory name of the PC that recorded images of when FTP errors occur will be downloaded to can be performed.

  • Page 72: Configure The Settings Relating To Images And Audio [Image/Audio]

    11 Configure the settings relating to images and audio [Image/Audio] 11 Configure the settings relating to images and audio [Image/Audio] The settings relating to JPEG and H.264 images such as the settings of image quality, audio, etc. can be configured on this page. The “Image/Audio”...

  • Page 73: Configure The Settings Relating To Jpeg Images [Jpeg/H.264]

    11 Configure the settings relating to images and audio [Image/Audio] 11.2 Configure the settings relating to JPEG images [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. (®page 38, page 40) “Live” page (Initial display) Configure the settings relating to the initial images displayed on the “Live” page. [Initial display stream] Select the image to display on the “Live”...
  • Page 74 11 Configure the settings relating to images and audio [Image/Audio] [Image capture size] Select the image capture size to display the JPEG image. SFV130 – When “2 mega pixel [16:9]” is selected for “Image capture mode” 1920x1080/1280x720/640x360/320x180/160x90 – When “2 mega pixel [4:3]” is selected for “Image capture mode” 1600x1200/1280x960/800x600/VGA/400x300/QVGA/160x120 –...

  • Page 75: Configure The Settings Relating To H.264 Images [Jpeg/H.264]

    11 Configure the settings relating to images and audio [Image/Audio] 11.3 Configure the settings relating to H.264 images [JPEG/H.264] Click the [JPEG/H.264] tab on the “Image/Audio” page. (®page 38, page 40) Configure the settings relating to H.264 image such as “Max bit rate (per client)”, “Image capture size”, “Image quality”, etc.
  • Page 76 11 Configure the settings relating to images and audio [Image/Audio] Note • When “On” is selected, only “Unicast port (AUTO)” will be available for “Transmission type”. • When “On” is selected, it may take time to start displaying H.264 images. •...
  • Page 77 11 Configure the settings relating to images and audio [Image/Audio] – H.264(1): 1280x960 – H.264(2): VGA – H.264(3): QVGA – H.264(4): 160x120 [Transmission priority] Select a transmission priority for H.264 images from the following. • Constant bit rate: H.264 images will be transmitted with the bit rate selected for “Max bit rate (per client) *”.
  • Page 78 11 Configure the settings relating to images and audio [Image/Audio] [Control time period] Select the time period that the bit rate will be controlled for from the following. Images are transmitted so that the average transmission rate during the selected period becomes the bit rate selected for “Max bit rate (per client)*”.
  • Page 79 11 Configure the settings relating to images and audio [Image/Audio] Note • When “Constant bit rate”, “Best effort”, or “VBR” is selected for “Transmission priority”, this setting is available. [Smart Coding mode] You can turn stream transmission adjustment on and off. This allows you to reduce the amount of data transmitted when there is little motion in the image.
  • Page 80 11 Configure the settings relating to images and audio [Image/Audio] – H.264(2): 33014 – H.264(3): 33024 – H.264(4): 33034 [Multicast address] Enter the multicast IP address. Images and audio will be transmitted to the designated IP address. • Available IPv4 address: 224.0.0.0 - 239.255.255.255 •...

  • Page 81: Configure The Settings Relating To Image Adjust, Extra Zoom, Privacy Zone, Viqs, And Lens Distortion Compensation [Image Quality]

    11 Configure the settings relating to images and audio [Image/Audio] 11.4 Configure the settings relating to image adjust, extra zoom, privacy zone, VIQS, and lens distortion compensation [Image quality] Click the [Image quality] tab on the “Image/Audio” page. (®page 38, page 40) When the [Setup>>] button of each setting item is clicked, the detailed settings menu will be displayed in a newly opened window.

  • Page 82: Configure The Settings Relating To Image Quality ("Image Adjust" Setup Menu)

    11 Configure the settings relating to images and audio [Image/Audio] 11.4.1 Configure the settings relating to image quality (“Image adjust” setup menu) Click the [Setup>>] button of “Image adjust” on the [Image quality] tab of the “Image/Audio” page. (®page 81) The settings relating to image quality can be configured with the setup menu displayed in a newly displayed window.
  • Page 83 11 Configure the settings relating to images and audio [Image/Audio] Operating Instructions...
  • Page 84 11 Configure the settings relating to images and audio [Image/Audio] [Super Dynamic(SD)] Select “On(High)”, “On(Normal)”, or “Off” to determine whether or not to activate the super dynamic function. Refer to the description “Super Dynamic function” about the super dynamic function. •...
  • Page 85 11 Configure the settings relating to images and audio [Image/Audio] Select “On” or “Off” to determine whether or not to interact with the Super Dynamic function. • On: The interactive control with face detection will work. • Off: The interactive control with face detection will not work. •...
  • Page 86 11 Configure the settings relating to images and audio [Image/Audio] • Default: On(High) [Maximum shutter] The maximum shutter time adjusts the storage time of the sensor. The following are available for the recording duration. Max.1/10000s, Max.1/4000s, Max.1/2000s, Max.1/1000s, Max.1/500s, Max.1/250s, Max.1/120s, Max.1/100s, Max.2/120s, Max.2/100s, Max.3/100s, Max.1/30s, Max.2/30s, Max.4/30s, Max.6/30s, Max.10/30s, Max.
  • Page 87 11 Configure the settings relating to images and audio [Image/Audio] [Red gain] Adjust the red color of images. When the cursor is moved in the “+” direction, the red color will become thicker. When the cursor is moved in the “-” direction, the red color will be thinner. Click the [Reset] button to reset the color to the default. •...

  • Page 88: Set Mask Areas

    11 Configure the settings relating to images and audio [Image/Audio] [High light compensation(HLC)] Select “On” or “Off” to determine whether or not to activate the high light compensation function. When “On(High)” or “On(Normal)” is selected for “Super Dynamic(SD)”, or when “On” is selected for “Back light compensation (BLC)”, this setting is not available.
  • Page 89 11 Configure the settings relating to images and audio [Image/Audio] Display the “Image adjust” setup menu. (®page 81) Operating Instructions...
  • Page 90 11 Configure the settings relating to images and audio [Image/Audio] Click the [Start] button of “Mask area”. → Borders will appear and the image displayed on the [Image quality] tab will be divided into 48 (6x8). Click the divided areas to be masked. →...

  • Page 91: Adjust The Angular Field Of View Using The Extra Zoom Function

    11 Configure the settings relating to images and audio [Image/Audio] • The mask area may move out of alignment when “Extra zoom” is configured. Make sure to check the mask area after configuring “Extra zoom”. Note • When the [Reset] button is clicked, masking for all the masked areas will be canceled. 11.5 Adjust the angular field of view using the extra zoom function Click the [Setup>>] button of “Extra zoom”...
  • Page 92 11 Configure the settings relating to images and audio [Image/Audio] cropping area (®page 122) is configured. To prevent this, perform the setting for the extra zoom function before other settings. Operating Instructions...

  • Page 93: Configure The Settings Relating To The Privacy Zone ("Privacy Zone" Setup Menu)

    11 Configure the settings relating to images and audio [Image/Audio] 11.6 Configure the settings relating to the privacy zone (“Privacy zone” setup menu) Click the [Setup>>] button of “Privacy zone” on the [Image quality] tab of the “Image/Audio” page. (®page 81) When there is a zone that you do not want to display, set the zone as a privacy zone not to be displayed.
  • Page 94 11 Configure the settings relating to images and audio [Image/Audio] IMPORTANT • When "Mosaic" is selected for [Display type], image behind the set area can be seen through.Therefore, the object and person behind the area can be recognized to some extent. Always check the result image according to factors such as the setting conditions or the subject.

  • Page 95: Configure The Viqs Setting

    11 Configure the settings relating to images and audio [Image/Audio] 11.7 Configure the VIQS setting Click the [Setup>>] button of “VIQS” on the [Image quality] tab of the “Image/Audio” page. (®page 81) VIQS is an abbreviation of Variable Image Quality on Specified area and is a feature that enables you to change the images of a specified area.
  • Page 96 11 Configure the settings relating to images and audio [Image/Audio] • Off: Does not set the VIQS area. • Default: Off [Delete] button Deletes the VIQS area. Click the button to delete the VIQS area. [Level] Configure the difference level in the image quality between specified areas and non-specified areas. The greater the difference level, the more the image quality of the non-specified area is reduced.

  • Page 97: Configure The Viqs Area

    11 Configure the settings relating to images and audio [Image/Audio] 11.8 Configure the VIQS area The VIQS area is specified by following the steps below. Drag the mouse on the screen to specify the area (up to 8 areas). → The specified area is set to area “1(White)”, and the outline is displayed.
  • Page 98 11 Configure the settings relating to images and audio [Image/Audio] IMPORTANT • No setting contents are determined unless the [Set] button is clicked. • To check the image after configuring VIQS, display an H.264 image on the “Live” page, or press the [Confirm] button under “Stream”.

  • Page 99: Configure The Settings Relating To Lens Distortion Compensation

    11 Configure the settings relating to images and audio [Image/Audio] 11.9 Configure the settings relating to lens distortion compensation Click the [Setup>>] button of “Lens distortion compensation” on the [Image quality] tab of the “Image/Audio” page. (®page 81) Distortion correction can be performed using lens distortion compensation. The amount of compensation performed can be adjusted.

  • Page 100: Configure The Settings Relating To Audio [Audio]

    11 Configure the settings relating to images and audio [Image/Audio] 11.10 Configure the settings relating to audio [Audio] Click the [Audio] tab on the “Image/Audio” page. (®page 38, page 40) The settings relating to audio can be configured on this page. Note •...
  • Page 101 11 Configure the settings relating to images and audio [Image/Audio] • Default: – When "G.726" is selected : 32kbps – When "AAC-LC (HIGH QUALITY)" is selected : 128kbps Note • When selecting a smaller value for “Bandwidth control(bit rate)” (®page 130) while putting a priority on the JPEG image transmission, select “16kbps”...

  • Page 102: Configure The Multi-Screen Settings [Multi-Screen]

    12 Configure the multi-screen settings [Multi-screen] 12 Configure the multi-screen settings [Multi-screen] The cameras from which images are to be displayed on a multi-screen can be registered on the “Multi-screen” page. (®page 38, page 40) [IP address] Enter the IP address or the host name of the camera to be used for the multi-screen. 4 cameras can be registered as a group and up to 4 groups (16 cameras) can be registered.
  • Page 103 12 Configure the multi-screen settings [Multi-screen] • “Network Camera Recorder with Viewer Software Lite” which supports live monitoring and recording images from multiple cameras is available. For further information, refer to our website (https://i-pro.com/global/en/surveillance/training-support/support/technical-information). • This camera is specified when “selfcamera” is displayed for the IP address or host name. Note •...

  • Page 104: Configure The Alarm Settings [Alarm]

    13 Configure the alarm settings [Alarm] 13 Configure the alarm settings [Alarm] The settings relating to alarm occurrences such as settings for the alarm action at an alarm occurrence or alarm images, the VMD area settings, audio detection settings, and the alarm occurrence notification can be configured on this page.

  • Page 105: Configure The Settings Relating To The Camera Action On Alarm Occurrence [Alarm]

    13 Configure the alarm settings [Alarm] [Alarm deactivation time] Configure the duration that detections won't be made after an alarm is detected. For example, by using this function you can prevent E-mail from being sent too often when E-mail notifications are configured to be sent to cellular phones when an alarm is detected.

  • Page 106: Configure Settings Relating To Image Quality On Alarm Action

    13 Configure the alarm settings [Alarm] 13.2.1 Configure settings relating to image quality on alarm action Click “Image compression rate upon alarm detection” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) [Image compression rate upon alarm detection] Select “On”...

  • Page 107: Configure Settings Relating To Alarm E-Mail Notifications

    13 Configure the alarm settings [Alarm] 13.2.2 Configure settings relating to alarm E-mail notifications Click “E-mail server >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) Refer to page 135 for information on configuration for these settings. Operating Instructions...

  • Page 108: Configure Settings Relating To Ftp Transmissions Of Alarm Images

    13 Configure the alarm settings [Alarm] 13.2.3 Configure settings relating to FTP transmissions of alarm images Click “FTP >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) Refer to page 138 for information on configuration for these settings. Operating Instructions...

  • Page 109: Configure Settings Relating To Recording To An Sd Memory Card When An Alarm Occurs

    13 Configure the alarm settings [Alarm] 13.2.4 Configure settings relating to recording to an SD memory card when an alarm occurs Click “SD memory card >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) Refer to page 51 for information on configuration for these settings.

  • Page 110: Configure Settings Relating To Tcp Alarm Notification When An Alarm Occurs

    13 Configure the alarm settings [Alarm] 13.2.5 Configure settings relating to TCP alarm notification when an alarm occurs Click “TCP alarm notification >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) Refer to page 118 for information on configuration for these settings. Operating Instructions...

  • Page 111: Configure Settings Relating To Http Alarm Notification When An Alarm Occurs

    13 Configure the alarm settings [Alarm] 13.2.6 Configure settings relating to HTTP alarm notification when an alarm occurs Click “HTTP alarm notification >>” of “Camera action on alarm” on the [Alarm] tab of the “Alarm” page. (®page 105) Refer to page 120 for information on configuration for these settings. 13.3 Configure the VMD settings [VMD area] Click the [VMD area] tab on the “Alarm”...
  • Page 112 13 Configure the alarm settings [Alarm] • The motion detection function is not the dedicated function to prevent thefts, fires, etc. We are not responsible for any accidents or damages that may occur. [Area] When selecting a VMD area in the screen, it will be numbered as area 1. (Subsequent areas will be numbered in the order of selection.) [Status] Select “On”...

  • Page 113: Set The Vmd Areas [Vmd Area]

    13 Configure the alarm settings [Alarm] The current value (1 (low) - 15 (high)) will be displayed below the slider. • Default: 8 [Delete] button Click the [Delete] button corresponding to the area to be deleted. The outline of the selected area will be deleted.
  • Page 114 13 Configure the alarm settings [Alarm] Set the video motion detection area by dragging the mouse on the screen. → The designated area will become the VMD area “1(White)” and the outline will be displayed. When 2 - 4 VMD areas are set, each area will be numbered in order. The areas will be identified by the respective outline colors.

  • Page 115: Configure The Settings Relating To The Audio Detection [Audio Detection]

    13 Configure the alarm settings [Alarm] 13.4 Configure the settings relating to the audio detection [Audio detection] Click the [Audio detection] tab on the “Alarm” page. (®page 38, page 40) The settings relating to audio detection can be configured in this section. When the configured audio detection level is exceeded, the alarm action will be performed.
  • Page 116 13 Configure the alarm settings [Alarm] Note • The volume level for when audio detection is performed can be changed in “Mic input volume (Camera to PC)” on the [Audio] tab of the “Image/Audio” page. (®page 100) [Audio detection level] Select the level at which the camera determines that there is sound in the area around the camera when detecting sound.

  • Page 117: Configuration Of The Settings Relating To Alarm Notification [Notification]

    13 Configure the alarm settings [Alarm] Adjust the “Mic input volume (Camera to PC)” on the [Audio] tab of the “Image/Audio” page as necessary. (®page 100) → The settings and the actual audio detection status are displayed on the bottom of the screen. If the volume level goes above the audio detection level, a red bar, which indicates that sound has been detected, is displayed.

  • Page 118: Configure The Settings Relating To Tcp Alarm Notification

    13 Configure the alarm settings [Alarm] 13.5.1 Configure the settings relating to TCP alarm notification TCP alarm notification [TCP alarm notification] Select “On” or “Off” to determine whether or not to provide notification by TCP alarm notification according to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below. –...
  • Page 119 13 Configure the alarm settings [Alarm] [Additional alarm data] Determine whether or not to send notifications for VMD alarm detection area numbers with the TCP alarm notification by selecting On/Off. • Default: Off [Destination port] Select a destination port for the TCP alarm notification from the following. •...

  • Page 120: Configure The Settings Relating To Http Alarm Notification

    13 Configure the alarm settings [Alarm] 13.5.2 Configure the settings relating to HTTP alarm notification HTTP alarm notification [Address 1] - [Address 5] Enter the destination IP address or host name of the HTTP alarm notification. Up to 5 destination server addresses can be registered.
  • Page 121 13 Configure the alarm settings [Alarm] [Notification data] Enter the notification data to add after the destination HTTP server addresses set in [Address 1] - [Address • Available characters: Alphanumeric characters • Default: /cgi-bin/comalarm.cgi?CMD=01 Note • For “Address 1” to “Address 5”, a total of 256 characters can be entered for the address (including “http://”) and “Notification data”.

  • Page 122: Configure The Settings Related To Advanced View [Advanced View]

    14 Configure the settings related to advanced view [Advanced view] 14 Configure the settings related to advanced view [Advanced view] Settings related to cropping can be configured on the “Advanced view” page. The “Advanced view” page has the [Cropping] tab. 14.1 Configure the settings relating to cropping [Cropping] Click the [Cropping] tab on the “Advanced view”...
  • Page 123 14 Configure the settings related to advanced view [Advanced view] Clicking on the outside of the outline adds a new outline. Streams that are configured in cropping use the same cropping area as the [Cropping] display. Therefore, if the cropping outline is changed, the cropping area of streams configured in cropping are changed according to the settings of the cropping outline.
  • Page 124 14 Configure the settings related to advanced view [Advanced view] [Self return time] Configure how long cropping images are transmitted for when an alarm occurs. When the set time has passed, cropping images stop being transmitted and the camera starts transmitting full-screen images. Available only when “On”...

  • Page 125: Configure The Settings Relating To The Authentication [User Mng.]

    15 Configure the settings relating to the authentication [User mng.] 15 Configure the settings relating to the authentication [User mng.] The settings relating to the authentication such as users and PCs restrictions for accessing the camera with a PC or cellular phone/mobile terminal can be configured on the “User mng.” page. The “User mng.”...

  • Page 126: Configure The Settings Relating To The Host Authentication [Host Auth.]

    15 Configure the settings relating to the authentication [User mng.] Basic: Uses Basic authentication. • Default: Digest or Basic Note • When the [Authentication] setting has been changed, close the web browser, and then access the camera again. • For other devices such as network disk recorders, unless otherwise stated, Digest authentication is not supported.

  • Page 127: Configure The Settings Relating To The Priority Stream [System]

    15 Configure the settings relating to the authentication [User mng.] The restriction settings of PCs (IP address) from accessing the camera can be configured on this page. [Host auth.] Select “On” or “Off” to determine whether or not to authenticate the host. •...
  • Page 128 15 Configure the settings relating to the authentication [User mng.] The description below is the configuration of the priority stream that can transmit images without deteriorating the image quality and refresh interval even when multiple users access concurrently. Priority stream [Activation] Select “On”...
  • Page 129 15 Configure the settings relating to the authentication [User mng.] Note • When “On” is selected for “H.264 transmission”, the transmission interval may be longer than the set value when any value with an asterisk (*) on the right is selected. Operating Instructions...

  • Page 130: Configuring The Network Settings [Network]

    16 Configuring the network settings [Network] 16 Configuring the network settings [Network] The network settings can be configured on the “Network” page. The “Network” page has the [Network] tab and the [Advanced] tab. 16.1 Configure the network settings [Network] Click the [Network] tab on the “Network” page. (®page 38, page 40) The following information is required to configure the network settings.
  • Page 131 16 Configuring the network settings [Network] IPv4 network [Network Settings] Select the method of how to configure the IP address from the following. • Static: The IP address is configured by entering manually on “IP address(IPv4)”. • DHCP: The IP address is configured using the DHCP function. •...
  • Page 132 16 Configuring the network settings [Network] IPv6 network [Manual] Select “On” or “Off” to determine whether or not to manually configure the IP address for IPv6 network (IPv6 address). • On: Enter an IPv6 address manually. • Off: Manual entry of an IPv6 address will become unavailable. •...
  • Page 133 16 Configuring the network settings [Network] [Max RTP packet size] Select “Unlimited(1500byte)” or “Limited(1280byte)” to determine whether or not to restrict the RTP packet size when viewing images from the camera using the RTP protocol. It is recommended to use with the default “Unlimited(1500byte)”.

  • Page 134: Configure Advanced Network Settings [Advanced]

    16 Configuring the network settings [Network] • To access the camera via the Internet by connecting the camera to a router, it is necessary to assign a respective HTTP port number for each camera and address translation by using the port forwarding function of the router.

  • Page 135: Configure The Settings Related To Sending E-Mails

    16 Configuring the network settings [Network] 16.2.1 Configure the settings related to sending E-mails [E-mail notification] Select “On” or “Off” to determine whether or not to provide notification by E-mail according to the settings for the “Alarm” and “Diag.” checkboxes of “Destination of notification” below. –...
  • Page 136 16 Configuring the network settings [Network] [SMTP server address] Enter the IP address or the host name of the SMTP server used to send E-mails. • Available number of characters: 1 - 128 characters • Available characters: Alphanumeric characters, the colon (:), the period (.), the underscore (_), and the hyphen (-).
  • Page 137 16 Configuring the network settings [Network] [SSL] Select “On” if you want to use SSL encryption when sending E-mail notifications for alarm occurrences or the “Diag.” function. When you select “On”, the authentication method will be set to “SMTP”. Set the user name and the password used for authentication.

  • Page 138: Configure The Settings Related To Ftp Transmission

    16 Configuring the network settings [Network] 16.2.2 Configure the settings related to FTP transmission [Alarm image FTP transmission] Select “On” or “Off” to determine whether or not to transmit the alarm image to the FTP server. • Default: Off [Directory name] Enter the directory name where the alarm images are to be saved.
  • Page 139 16 Configuring the network settings [Network] • Available number of characters: 1 - 32 characters • Unavailable characters: " & * / : ; < > ? \ | [FTP transmission retry] Select “On” or “Off” to determine whether or not to resend failed FTP transmissions. On: If transmission fails, transmissions are resent until they are successfully sent.
  • Page 140 16 Configuring the network settings [Network] [Post alarm] • Transmission interval Select the transmission interval for the alarm image transmission to the FTP server from the following. 0.1fps/ 0.2fps/ 0.33fps/ 0.5fps/ 1fps • Default: 1fps • Number of images Select the number of images to be transmitted from the following. 1pic/ 2pics/ 3pics/ 4pics/ 5pics/ 6pics/ 7pics/ 8pics/ 9pics/ 10pics/ 20pics/ 30pics/ 50pics/ 100pics/ 200pics/ 300pics/ 500pics/ 1000pics/ 1500pics/ 2000pics/ 3000pics •...

  • Page 141: Configure The Settings Relating To The Ntp Server

    16 Configuring the network settings [Network] [Transmission interval] Select the interval for the FTP periodic image transmission from the following. 1s/ 2s/ 3s/ 4s/ 5s/ 6s/ 10s/ 15s/ 20s/ 30s/ 1min/ 2min/ 3min/ 4min/ 5min/ 6min/ 10min/ 15min/ 20min/ 30min/ 1h/ 1.5h/ 2h/ 3h/ 4h/ 6h/ 12h/ 24h •...
  • Page 142 16 Configuring the network settings [Network] IMPORTANT • Use an NTP server when the more accurate time & date setting is required for the system operation. [Time adjustment] Select the time adjustment method from the following. Time adjusted by the selected method will be used as the standard time of the camera.

  • Page 143: Configure The Upnp Settings

    16 Configuring the network settings [Network] The following port numbers are unavailable since they are already in use. 20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 161, 162, 443, 995, 10669, 10670 [Time adjustment interval] Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization with the NTP server. •...

  • Page 144: Configure The Https Settings

    16 Configuring the network settings [Network] [Start] ® [Control Panel] ® [Network and Internet] ® [Network and Sharing Center] ® select [Turn on network discovery] of [Network discovery] of [Change advanced sharing settings] ® click [Save changes] ® Complete For Windows 8.1 and Windows 8 Right-click [Start] ®...
  • Page 145 16 Configuring the network settings [Network] [CA Certificate - Generate Certificate Signing Request] When using the security certificate issued by CA (Certificate Authority) as the security certificate used for the HTTPS protocol, the CSR (Certificate Signing Request) will be generated. To generate the CSR, click the [Execute] button to display the “CA Certificate - Generate Certificate Signing Request”...

  • Page 146: Configure The Settings Relating To Ddns

    16 Configuring the network settings [Network] • The maximum number of concurrent access user varies depending on the maximum image size and transmission format. 16.2.6 Configure the settings relating to DDNS To access this camera via the Internet, it is necessary to configure the settings for the DDNS function. Refer to page 162 for how to configure the settings relating to DDNS.

  • Page 147: Configure The Diffserv Settings

    16 Configuring the network settings [Network] [Community] Enter the community name to be monitored. • Available number of characters: 0 - 32 characters • Default: None (blank) IMPORTANT • When using the SNMP function, it is necessary to enter the community name. When no community name is entered, the SNMP function will not work.

  • Page 148: How To Configure Https Settings

    16 Configuring the network settings [Network] 16.3 How to configure HTTPS settings The settings relating to the HTTPS protocol that can enhance the network security by encrypting the access to cameras on this page. The HTTPS settings will be configured in the following procedure. Generation of the CRT key (SSL encryption key) When using the self-signed certifi cate When using the server certi ficate...

  • Page 149: Generation Of The Crt Key (Ssl Encryption Key)

    16 Configuring the network settings [Network] Note • To use the server certificate, you need to apply for the approval and the issue of server certificate by • Either of the self-signed certificate or the server certificate is available. If both of them are installed, the server certificate will be used prior to the self-signed certificate.

  • Page 150: Generation Of The Self-Signed Certificate (Security Certificate)

    16 Configuring the network settings [Network] key. When the [Apply] button is clicked on the “Previous CRT key” dialog box, it is possible to replace the current CRT key with the previous one. 16.3.2 Generation of the self-signed certificate (security certificate) IMPORTANT •...
  • Page 151 16 Configuring the network settings [Network] Item Description Available number of characters [Organizational Enter the unit name of the organization. 64 characters Unit] (Omission is OK.) [CRT key] Displays the key size and generation time & date of the current key. Note •...

  • Page 152: Generation Of Csr (Certificate Signing Request)

    16 Configuring the network settings [Network] • When the [Delete] button is clicked, the generated self-signed certificate (security certificate) will be deleted. • When “HTTPS” is selected for “Connection”, it is impossible to delete the self-signed certificate. 16.3.3 Generation of CSR (Certificate Signing Request) IMPORTANT •...

  • Page 153: Installation Of The Server Certificate

    16 Configuring the network settings [Network] Item Description Available number of characters [CRT key] Displays the key size and generation time & date of the current key. Note • To use the server certificate, follow the requests from the CA about the information to be entered. •...

  • Page 154: Configuration Of The Connection Protocol

    16 Configuring the network settings [Network] • When the [Confirm] button is clicked, the registered information of the installed server certificate will be displayed in the “CA Certificate - Confirm” dialog box. (Only “Organizational Unit” will be displayed with an asterisk (*).) •...

  • Page 155: Access The Camera Using The Https Protocol

    16 Configuring the network settings [Network] If the camera is accessed using the HTTPS protocol for the first time, the warning window will be displayed. In this case, follow the instructions of the wizard to install the self-signed (security) certificate. (®page 155) •...
  • Page 156 16 Configuring the network settings [Network] • When the address or host name of the camera is changed, the security alert window will be displayed each time the camera is accessed even if the security certificate is installed. Install the security certificate again.
  • Page 157 16 Configuring the network settings [Network] Click “Certificate Error” over the URL, and click “View certificates”. Operating Instructions...
  • Page 158 16 Configuring the network settings [Network] Click “Install Certificate...”. Note • If [Install Certificate...] is not displayed, close Internet Explorer once, and select [Run as Administrator] to launch Internet Explorer again. Click [Start] ® [All Programs] ® right click [Internet Explorer] ®...
  • Page 159 16 Configuring the network settings [Network] Click “Next” displayed on “Certificate Import Wizard”. Note • When using Internet Explorer 10 or Internet Explorer 11, select “Store Location”, and then click “Next”. Operating Instructions...
  • Page 160 16 Configuring the network settings [Network] Select “Place all certificates in the following store”, and click “Browse...”. Select “Trusted Root Certificate Authorities”, and click “OK”. Operating Instructions...
  • Page 161 16 Configuring the network settings [Network] Click “Next”. Click “Finish”. Operating Instructions...

  • Page 162: How To Configure The Settings Relating To Ddns

    16 Configuring the network settings [Network] Click “Yes”. → When the import is successfully completed, the screen “The import was successful.” will be displayed. Click “OK”. → When the browser is restarted after the certificate is imported, “Certificate Error” will not be displayed. 16.5 How to configure the settings relating to DDNS When activating the DDNS function using the camera, either of the following DDNS services is available.

  • Page 163: Configuration Of The Ddns Service (Example Of The "Viewnetcam.com" Service)

    16 Configuring the network settings [Network] Note • “Viewnetcam.com” is a Dynamic DNS service designed for use with our Network Cameras. Refer to the “Viewnetcam.com” website (http://www.viewnetcam.com/) for further information about the service. About DDNS services (IPv4/IPv6) By using a DDNS service, it becomes possible to view camera images via the Internet. The DDNS service associates dynamic global addresses and domain names.

  • Page 164: When Using The "Viewnetcam.com" Service

    16 Configuring the network settings [Network] “*****.viewnetcam.com” and the current global address is automatically registered. If you are enrolled in “Viewnetcam.com”, the unique “domain name” (example: *****.viewnetcam.com) will be allocated. The “Viewnetcam.com” service server automatically manages the domain name of camera and the global address of router (or camera) when a camera automatically notifies the service server of the global address.

  • Page 165: Procedure To Register Information For The "Viewnetcam.com" Service

    16 Configuring the network settings [Network] If you cannot access the camera using the registered URL 30 minutes after registering with “Viewnetcam.com”, select “Advanced”. In this case, UPnP (®page 143) must be enabled for the camera and for the router. •...

  • Page 166: Checking The Information Registered For The "Viewnetcam.com" Service

    16 Configuring the network settings [Network] Note • When the registration for the “Viewnetcam.com” service is completed, the URL registered for “Personal(Camera) URL” is displayed. It may take up to about 30 minutes until the URL of the registered camera is validated. •...

  • Page 167: When Using "Dynamic Dns Update(Dhcp)

    16 Configuring the network settings [Network] • Default: 24h 16.5.6 When using “Dynamic DNS Update(DHCP)” [Host name] Enter the host name to be used for the Dynamic DNS Update service. • Available number of characters: 3 - 250 characters Enter in the form of “(host name). (domain name)”. •...

  • Page 168: Configure The Settings Relating To The Schedules [Schedule]

    17 Configure the settings relating to the schedules [Schedule] 17 Configure the settings relating to the schedules [Schedule] On the “Schedule” page, it is possible to configure the settings relating to schedules as follows. • VMD permission • Audio detection permission •...
  • Page 169 17 Configure the settings relating to the schedules [Schedule] Up to 5 schedules can be set. Select an action to be assigned to the schedule from “Schedule mode”. “Off” is selected at the default. • Off: No action will be taken for the respective schedule. •...
  • Page 170 17 Configure the settings relating to the schedules [Schedule] • Audio detection permission: The audio detection function will be active during the period of the schedule. • Access permission: Users whose access level is set to 2 and 3 on the [User auth.] tab (®page 125) can access the camera only in the period of schedule.

  • Page 171: How To Set The Schedules

    17 Configure the settings relating to the schedules [Schedule] 17.1 How to set the schedules Check the check box of the desired day of the week of “FTP image transmission schedule”. → The selected day of the week will be validated for the schedule. To designate time, select the desired “hour”...
  • Page 172 17 Configure the settings relating to the schedules [Schedule] Click the [Set] button after completing the settings. → The result will be displayed at the bottom of the window. Operating Instructions...

  • Page 173: How To Delete The Set Schedule

    17 Configure the settings relating to the schedules [Schedule] 17.2 How to delete the set schedule Uncheck the check box of the set day of the week. Operating Instructions...
  • Page 174 17 Configure the settings relating to the schedules [Schedule] Click the [Set] button after completing the settings. → The schedule of the selected day of the week is deleted. Operating Instructions...

  • Page 175: Maintenance Of The Camera [Maintenance]

    18 Maintenance of the camera [Maintenance] 18 Maintenance of the camera [Maintenance] System log check, firmware upgrade, status check and initialization of the setup menu can be performed on this page. The “Maintenance” page has the [System log] tab, the [Upgrade] tab, [Status] tab, the [Default reset] tab, and the [Data] tab.
  • Page 176 18 Maintenance of the camera [Maintenance] The current firmware can be checked and upgraded to the latest version on this page. Contact the dealer for further information about the firmware upgrade. [Model no.], [MAC address], [Serial no.], [Firmware version], [IP address(IPv6)], [Viewer software installation counter], [Time past from the date of manufacture] Information of each item will be displayed.

  • Page 177: Check The Status [Status]

    18 Maintenance of the camera [Maintenance] https://i-pro.com/global/en/surveillance/training-support/support • To view the website, it is necessary to be connected to the internet. Click the radio button respective to the desired option to determine whether or not to initialize the settings after completing the firmware upgrade. Default: Do not reset the settings to the default after the upgrade.
  • Page 178 18 Maintenance of the camera [Maintenance] The status of this camera can be checked on this page. Viewnetcam.com [Server] The URL of the “Viewnetcam.com” service server will be displayed. [Status] The registration status for the “Viewnetcam.com” will be displayed. [Personal(Camera) URL] The URL of the camera registered for “Viewnetcam.com”...
  • Page 179 18 Maintenance of the camera [Maintenance] [Router global address] The global address of router will be displayed. Self check The self check result of the hardware will be displayed. Note • Refer to our website (https://i-pro.com/global/en/surveillance/training-support/support/technical- information) for further information about the contents of the displayed statuses (relating to the “Viewnetcam.com”...

  • Page 180: Reset The Settings/Reboot The Camera [Default Reset]

    18 Maintenance of the camera [Maintenance] Category Indication Description <SD> Format Successfully formatted the SD memory card. <SD> Format error Error occurred when formatting the SD memory card. SD memory card <SD> Write-protect ON A write-protected SD memory card is inserted. (Locked card) <SD>...

  • Page 181: Settings Data/Backing Up Or Restoring Logs [Data]

    18 Maintenance of the camera [Maintenance] [Reset to the default (Except the network settings)] Click the [Execute] button to reset the settings to the default. Note that the network settings will not be reset. It is impossible to operate the camera for about 3 minutes after the initialization. [Load the default HTML files (setup menu).] Click the [Execute] button to reset the HTML files to the default.
  • Page 182 18 Maintenance of the camera [Maintenance] The settings related to backing up or restoring settings data, and saving logs can be configured in this section. Backup [Setup data] Click the [Execute] button to backup the setup data of the camera to a PC. [Scene file] Click the [Execute] button to backup the scene files of the camera to a PC.
  • Page 183 18 Maintenance of the camera [Maintenance] [Scene file] Press the [Browse...] button and select the scene files to restore. Click the [Execute] button to start restoring. Do not perform operations until the restoration is complete. Make sure to set the file name of scene file data used when restoring to “model name.txt”. (The model name must be written in lower case letters and “WV-”...

  • Page 184: About The Displayed System Log

    19 About the displayed system log 19 About the displayed system log Error indications relating to SMTP Category Indication Description POP3 server error Authentication error. • Entered user name or password may be incorrect. Check if the E-mail settings are configured correctly.
  • Page 185 19 About the displayed system log Category Indication Description Internal error Undefined error. • An error occurred in the FTP function. Check if the FTP settings are configured correctly. Error indications relating to “Viewnetcam.com” Category Indication Description Viewnetcam.com Failed to resolve the •...
  • Page 186 19 About the displayed system log Error indications relating to NTP Category Indication Description Connection error No response from the NTP server. • The IP address of the server may be incorrect. Check if the IP address of the server is configured correctly. •...
  • Page 187 19 About the displayed system log Error indications relating to TCP alarm notification Category Indication Description TCP alarm notification Failed to find destination of • The IP address of the destination of error notification. notification may be incorrect. Check if the IP address of the destination of notification is configured correctly.
  • Page 188 19 About the displayed system log Error indications relating to SD memory card security settings Category Indication Description SD memory card Lock error • The lock for the SD memory card could not be configured. Check the SD memory card again. •...

  • Page 189: Troubleshooting

    20 Troubleshooting 20 Troubleshooting Before asking for repairs, check the symptoms with the following table. Contact your dealer if a problem cannot be solved even after checking and trying the solution in the table or a problem is not described below. Symptom Cause/solution Reference pages...
  • Page 190 20 Troubleshooting Symptom Cause/solution Reference pages • Is “554” selected for the HTTP port number? For the HTTP port number, select a port number other than the following port numbers used by the camera. The number used by the camera: 20, 21, 23, 25, 42, 53, 67, 68, 69, 110, 123, 161, 162, 443, 554, 995, 10669, 10670, 59000 - 61000 •...
  • Page 191 20 Troubleshooting Symptom Cause/solution Reference pages • Is the setting of port forwarding configured for the router? To enable the access to the camera via the Internet, it is necessary to perform the port forwarding setting when the router in use does not support the UPnP function.
  • Page 192 20 Troubleshooting Symptom Cause/solution Reference pages • Are you accessing another camera in the same local network via a proxy server? Configure the web browser to not use the proxy server. • Are two or more users browsing the camera images simultaneously? It may take time to display the screen or refresh interval may become slower when two or more users...
  • Page 193 20 Troubleshooting Symptom Cause/solution Reference pages User registration for the • Is the registered E-mail address correct? “Viewnetcam.com” service When an E-mail with the “Viewnetcam.com” website fails. link is not received, the registered E-mail address may be incorrect. Visit the “Viewnetcam.com” website (http://www.viewnetcam.com/) to register the correct E-mail address.
  • Page 194 20 Troubleshooting Symptom Cause/solution Reference pages Images are displayed blurry. • Installation Guide Is the focus adjusted correctly? Check if the focus is adjusted correctly. The image is not being • Installation Guide Depending on the version of your browser, there refreshed.
  • Page 195 20 Troubleshooting Symptom Cause/solution Reference pages Audio is not output from other • Some of the products such as a network disk products such as a network recorder or PC software package may not support disk recorder or PC software “G.711”, "AAC-LC"...
  • Page 196 20 Troubleshooting Symptom Cause/solution Reference pages H.264 images are not • When “Network Camera View 4S” is deleted from a displayed. PC on which both the viewer software “Network Camera View 3” and “Network Camera View 4” are installed, H.264 images will not be displayed. In this case, delete “Network Camera View 3”...
  • Page 197 20 Troubleshooting Information Bar Depending on the OS installed on the PC, the following may occur. Follow the instructions below when the following has occurred. By performing the following solutions, other applications may not be affected. When using Internet Explorer 9, Internet Explorer 10, or Internet Explorer 11: The “Information Bar”...
  • Page 198 20 Troubleshooting Symptom Cause/solution Reference pages The following message is • Click the information bar and select “Install displayed on the information ActiveX Control”. bar. The “Security Warning” window will be displayed. “This site might require the Click the [Install] button on the displayed following ActiveX control “Security Warning”...

  • Page 199: Directory Structure Of Drive B

    21 Directory structure of drive B 21 Directory structure of drive B 150101 0123 Image failed to transmit to the FTP server by the FTP periodic Drive B image transmission function 150102 (Ex. img_15010101230000.jpg) ： ALARM File name.01 Image captured at the alarm 00001000 15010112.01 occurrence...
  • Page 200 i-PRO Co., Ltd. https://www.i-pro.com/ PGQP2210TA C0316-6042 © i-PRO Co., Ltd. 2022...

This manual is also suitable for:

I-pro wv-sfv110I-pro wv-sfv130mI-pro wv-sfv110mI-pro wv-sfn130I-pro wv-sfv130I-pro wv-sfn110 ... Show all

Table of Contents