Canon JCT-TF5G Instruction Manual

3cmos color camera

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Download this manual

3CMOS COLOR CAMERA

JCT-TF5G

This manual is made from recycled paper.

INSTRUCTION MANUAL

For Customer Use

Enter below the Serial No.

w h i c h i s l o c a t e d o n t h e

bottom of the cabinet. Retain

this information for future ref-

erence.

Model No.:

Serial No.:

2B996-016JA

JCT-TF5G

Table of Contents

Summary of Contents for Canon JCT-TF5G

Page 1 2B996-016JA 3CMOS COLOR CAMERA INSTRUCTION MANUAL JCT-TF5G For Customer Use Enter below the Serial No. w h i c h i s l o c a t e d o n t h e bottom of the cabinet. Retain this information for future ref- erence.
Page 2: Table Of Contents
2B996-016JA TABLE OF CONTENTS REGULATORY INFORMATION ��4 FCC INFORMATION ..........................4 Following information is only for EU-member states ..................5 SAFETY PRECAUTIONS��6 1� CAUTIONS ON USE AND INSTALLATION ��9 2� COMPONENTS ��9 3� NAMES AND FUNCTIONS �� 10 4� CONNECTION�� 11 4. 1 Standard Connection ........................11 4.
Page 3 2B996-016JA ( 5 ) SHADING ............................25 (5.1) Changing V.SHAD. (Vertical Shading) correction mode ............26 (5.2) Changing the manual V.SHAD. (Vertical Shading) correction setting ........26 (5.3) Changing C.SHAD. (Corner Shading) correction mode ............26 (5.4) Changing the manual C.SHAD. (Corner Shading) correction setting ........26 ( 6 ) SYNC ...............................27 (6.1) Adjusting horizontal phase ......................27 ( 7 ) OPTION ............................27...
Page 4: Regulatory Information
2B996-016JA REGULATORY INFORMATION FCC INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 5: Following Information Is Only For Eu-Member States
2B996-016JA Following information is only for EU-member states In residential areas this product may cause radio interference, therefore this product must not be used in residential areas. The use of the symbol indicates that this product may not be treated as household waste.
Page 6: Safety Precautions
2B996-016JA SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
Page 7 5. Repairs or modifications made by the user or caused to be made by the user and carried out by an unauthorized third party. Notwithstanding the foregoing, CANON MEDICAL SYSTEMS CORPORATION’s liabilities shall not, in any circumstances, exceed the purchase price of the product.
Page 8 Accordingly, CANON MEDICAL SYSTEMS CORPORATION disclaims any and all liability arising out of the use of the product in any critical applications.
Page 9: 1� Cautions On Use And Installation
2B996-016JA 1� CAUTIONS ON USE AND INSTALLATION • Handling the unit� • Do not shoot intense light� If a strong light is imaged, vertical stripes or traverse Do not drop, jolt, or vibrate, as this may result in damage to the unit and may cause problems. bands may appear on the screen but this is not a Treat the camera cables carefully to prevent cable failure.
Page 10: 3� Names And Functions
2B996-016JA 3� NAMES AND FUNCTIONS DC IN 12V terminal Prism faceplate DISP button MENU UP button (AWB) DATA UP (AWB) button DISP MENU DATA DC IN 12V DATA DOWN button PAGE MENU DOWN button DIGITAL terminal PAGE button [ Front ] [ Rear ] [ Bottom ] ①...
Page 11: 4� Connection
2B996-016JA 4� CONNECTION 4� 1 Standard Connection Lens Cable (not included) JCT-TF5G DC IN 12V Frame grabber board, Monitor Less than 4 mm image process DC power equipment etc. supply 4� 2 Cautions on Connection • When connecting the camera cables, be sure to unplug the power source of the camera and the other equip- ment connected to it.
Page 12: 5� Operation
2B996-016JA 5� OPERATION ① Refer to the item “ 4. CONNECTION” , connect each component correctly. ② Turn on the power source of the connected equipment and the camera. ③ Point the lens at the object, adjust the lens iris, focus, etc.. ④...
Page 13: Gain
2B996-016JA ② MANU (Manual white balance) • Set the MODE to MANU on the WHT BAL menu. (Refer to the item “7.2 (3) WHT BAL (white balance)” . ) • Shoot a known white object, adjust the white balance adjusting the levels of R GAIN and B GAIN on the menu, confirming with a monitor etc.
Page 14: 6� Items Controlled By The Screen Display
2B996-016JA 6� ITEMS CONTROLLED BY THE SCREEN DISPLAY Preset value Item Available selections (Factory setting) MODE MANU, SS, E. TRG, AUTO MANU E. TRG 1P SR, PW SR, RR 1P SR OFF, 1/250s, 1/500s, 1/1000s, 1/2000s, 1/4000s, MANUAL speed 1/10000s, 1/24000s (NORMAL) / 1/27000s (FAST), 1/36000s (NORMAL) / 1/39000s (FAST) PART - Partial OFF, ON, EXT (partial scanning control by CC2)
Page 15: 7� Mode Setting By On Screen Display
2B996-016JA 7� MODE SETTING BY ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized even if the power source is turned off, so it is unnecessary to set again when using the unit next time.
Page 16: ( 1 ) Shutter (Electronic Shutter)
2B996-016JA ( 1 ) SHUTTER (Electronic shutter) The electronic shutter has four modes; MANU (Manual), SS (Synchro. Scan), E.TRG (External trigger), and AUTO (Auto Shutter). Move the “ ” to “MODE” and push [DATA UP], [DATA DOWN] button to select the desired mode among “MANU” , “SS” , “E.TRG”...
Page 17: (1.1) Changing The Setting In Manu Mode
2B996-016JA (1�1) Changing the setting in MANU mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • Shutter speed setting OFF, 250(1/250s), 500(1/500s), 1000(1/1000s), MODE MANU 2000(1/2000s), 4000(1/4000s), 10000(1/10000s),...
Page 18: (1.2) Changing The Setting In Ss (Synchro. Scan) Mode
2B996-016JA (1�2) Changing the setting in SS (synchro� scan) mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN SHUTTER MODE • Shutter mode MANU, SS, E.TRG, AUTO • Synchro. scanning setting PART refer to the item "7.3 Synchro.
Page 19: (1.3) Changing The Setting In E.trg Mode
2B996-016JA (1�3) Changing the setting in E�TRG mode The E.TRG has three modes; 1P SR, PW SR, RR. First move the “ ” to MODE and select E. TRG, then move the “ ” to E.TRG and select the desired E.TRG mode. (1�3�1) Changing the setting in 1P SR mode Move up down Select the desired...
Page 20: (1.3.2) Changing The Setting In Pw Sr Mode
2B996-016JA (1�3�2) Changing the setting in PW SR mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • E.TRG mode MODE E.TRG 1P SR, PW SR, RR E.TRG PW SR POSI...
Page 21: (1.3.3) Changing The Setting In Rr Mode
2B996-016JA (1�3�3) Changing the setting in RR mode Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN • Shutter mode MANU, SS, E.TRG, AUTO SHUTTER • E.TRG mode MODE E.TRG 1P SR, PW SR, RR E.TRG PART •...
Page 22: ( 2 ) Gain (Video Gain)
2B996-016JA ( 2 ) GAIN (Video gain) When shooting in dark locations, if the image is dark even if the lens iris is open, change the gain (video gain) to get the proper video level. ① MANU (Manual gain) Gain adjustment is performed on the GAIN menu. The adjustment range is from 0dB to 18dB in 1dB steps. ② OFF Gain is fixed at 0dB.
Page 23: ( 3 ) Wht Bal (White Balance)
2B996-016JA ( 3 ) WHT BAL (White balance) WHT BAL has two modes; AWB, MANU. Move the “ ” to MODE, push the [DATA UP], [DATA DOWN], and select one of the two modes between AWB and MANU. (3�1) Changing the setting in AWB (Automatic White Balance) mode Move up down Select the desired by pushing...
Page 24: 4 ) Process
2B996-016JA ( 4 ) PROCESS • Gamma Correction (GAMMA) Select either OFF or ON of Gamma Correction. • Master Pedestal (M. PED) Adjust the Pedestal level of each RGB. • R Pedestal (R. PED) Adjust the Pedestal level of Red. •...
Page 25: 5 ) Shading
2B996-016JA ( 5 ) SHADING Due to the lens used or the environmental condition, vertical color shading may occur at the top and bottom of the screen and at the corners. In this case, the shading correction can decrease the color shading. For the shading correction of the unit, you can select among MANU (Manual shading correction) or OFF (no shading correction) for V.SHAD.
Page 26: (5.1) Changing V.shad. (Vertical Shading) Correction Mode
2B996-016JA (5�1) Changing V�SHAD� (Vertical Shading) correction mode ① Move the “ ” to V.SHAD by pushing [MENU UP], [MENU DOWN] buttons. ② Select the V.SHAD. mode setting by pushing [DATA UP], [DATA DOWN] buttons. Note: The alignment value for vertical shading is fixed to “0” when selecting V.SHAD. OFF. MANU is not displayed in the menu.
Page 27: 6 ) Sync
2B996-016JA ( 6 ) SYNC When an external sync signal is input, the display menu changes from INT (internal sync) to EXT (external sync) automatically. Move up down Select the desired by pushing value by pushing MENU UP, DOWN DATA UP, DOWN SYNC MODE •...
Page 28: 8 ) Returning To Factory Settings
2B996-016JA ( 8 ) Returning to factory settings All the settings can be returned to the factory default status (preset status). (1) If characters are displayed on the screen, press the [DISP] button to disable the character display. (2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second. (3) The preset operation starts.
Page 29: Trg (External Trigger)
2B996-016JA 7� 4 E� TRG (External trigger) Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, and 1 frame images are output. There are two modes: 1P SR, PW SR. ( 1 ) 1P SR (1 Pulse Trigger SYNC-RESET) Charge begins to accumulate after the trigger input to CC1 of the DIGITAL terminal, the vertical sync signal is reset and frame images are output.
Page 30: ( 2 ) Pw Sr (Pulse Width Trigger Sync-Reset)
2B996-016JA ( 2 ) PW SR (Pulse width trigger SYNC-RESET) The trigger input to the CC1 of the DIGITAL terminal develops 1 frame images. ･ 1 Pulse Width Trigger SYNC-RESET Picture Output Timing Negative polarity mode Trigger * Positive polarity mode 0 to 1H * Trigger signal to internal...
Page 31: ( 3 ) Rr (Reset Restart)
2B996-016JA ( 3 ) RR (Reset restart) Input of an external reset-restart signal (CC4 of the DIGITAL terminal: External VD input) permits one screen of information to be output at an arbitrary timing. Long Term Exposure When sufficient sensitivity is not obtained under normal operating conditions or capturing the trail of a moving object is desired, the reset-restart function allows high-sensitivity images by extending the exposure time.
Page 32: Partial Scanning
2B996-016JA 7� 5 Partial Scanning Partial Scanning OFF (All pixels scanning) The independent signals of all pixels are output from DIGITAL connector. Video interval image NORMAL:1/124s (586H) , FAST:1/150s (586H) Partial Scanning ON The pixel signal of the specified area is output from the DIGITAL terminal. In the PART EXT mode, the partial scanning and all the pixels scanning can be switched by the DIGITAL terminal (CC2: partial scanning control signal).
Page 33: External Sync
2B996-016JA 7� 6 External Sync When using the unit with an external sync signal, input HD and VD to CC3 and CC4 of the DIGITAL terminal. When the external sync signal is input, the camera automatically switches its sync from the internal sync to the external sync.
Page 34: 8� Input Output Signal Specifications
2B996-016JA 8� INPUT OUTPUT SIGNAL SPECIFICATIONS HD Input Specifications VD Input Specifications 1.0µs 5.0µs Trigger Pulse Specifications (Positive polarity mode) More than 2 µs (Negative polarity mode) More than 2 µs External HD/VD Input Phase Specifications External VD falling edge External HD Unit : Clock NORMAL : 16.83ns...
Page 35: 9� Output Waveform Timing Chart
2B996-016JA 9� OUTPUT WAVEFORM TIMING CHART Horizontal Output Waveform Timing Chart One horizontal scan interval NORMAL: 816 clk / FAST: 840 clk (NORMAL:13.74 s / FAST:11.31 s) LVAL, DVAL Horizontal blanking interval Output video interval 720 clk NORMAL: 96 clk / FAST: 120 clk (NORMAL:1.62 s / FAST:1.62 s) (NORMAL:12.12 s / FAST:9.70 s) data...
Page 36: 10� Before Making A Service Call
2B996-016JA 10� BEFORE MAKING A SERVICE CALL Symptom Items to be checked No image • Is power supplied correctly? • Is the lens iris adjusted correctly? • Are the camera and video cables connected correctly? • Is the shutter mode set correctly? •...
Page 37: 11� Specifications
2B996-016JA 11� SPECIFICATIONS Power supply DC 12V ± 10% Power consumption Approx. 3.6 W Pick-up system RGB, 3CMOS Image sensor 1/2.9 type CMOS sensor (global shutter) Video output pixels Horizontal: 720 pixels, Vertical: 540 pixels Pixel clock frequency NORMAL mode: 59.4 MHz FAST mode: 74.25 MHz Sync signal frequency NORMAL mode Horizontal: 72.794 kHz, Vertical: 124.22 Hz...
Page 38: 12� External Appearance Diagram
2B996-016JA 12� EXTERNAL APPEARANCE DIAGRAM Unit : mm [inch] [0.20] 2-M3 Depth 3 [3.07] [0.25] [0.47] [1.73] 19.2 2-M2 4-M3 Depth 3 [0.76] [0.20] [2.20] 4-M2 Depth 3 [0.98] [0.98] inch=mm/25.4 ＊...
Page 39 2B996-016JA...