hit counter script
D-Link DIR-882 User Manual

D-Link DIR-882 User Manual

Ac2600 wave 2 mu-mimo wi-fi gigabit router with 3g/lte support and 2 usb ports
Hide thumbs Also See for DIR-882:
Table of Contents

Advertisement

User Manual
DIR-882
AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router
with 3G/LTE Support and 2 USB Ports
April 2021

Advertisement

Table of Contents
loading

Summary of Contents for D-Link DIR-882

  • Page 1 User Manual DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports April 2021...
  • Page 2: Table Of Contents

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports User Manual Contents Chapter 1. Introduction.........5 Contents and Audience............5 Conventions..............5 Document Structure............5 Chapter 2. Overview..........6 General Information............6 Specifications..............8 Product Appearance............15 Upper and Front Panels...........15 Back Panel...............17 Delivery Package............19...
  • Page 3 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports User Manual Statistics..............77 Network Statistics............77 DHCP..............78 Routing..............79 Clients and Sessions.............81 Port Statistics............82 Multicast Groups............83 Connections Setup............84 WAN..............84 Creating Dynamic IPv4 or Static IPv4 WAN Connection....86 Creating Dynamic IPv6 or Static IPv6 WAN Connection....89...
  • Page 4 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports User Manual USB Modem..............201 Basic Settings............202 SMS..............205 USSD..............207 Advanced..............208 VLAN..............209 WAN Assignment............212 Using LAN Ports as WAN Ports..........212 Using WAN Port as LAN Port..........213 SNMP..............214 DNS..............218...
  • Page 5: Chapter 1. Introduction

    Chapter 2 gives an overview of the router's hardware and software features, describes its appearance and the package contents. Chapter 3 explains how to install the router DIR-882 and configure a PC in order to access its web- based interface.
  • Page 6: Chapter 2. Overview

    WAN connection of different ISPs. In addition, you can configure the WAN failover using a 3G/4G modem. Also you are able to connect the wireless router DIR-882 to a cable or DSL modem or to a private Ethernet line and use a high-speed Internet connection to successfully fulfill a wide range of professional tasks.
  • Page 7 Smart adjustment of Wi-Fi clients is useful for networks based on several D-Link access points or routers – when the smart adjustment function is configured on each of them, a client always connects to the access point (router) with the highest signal level.
  • Page 8: Specifications

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Specifications Hardware Processor · MT7621A (880MHz, dual core) · 128MB, DDR3 Flash · 16MB, SPI Interfaces · 10/100/1000BASE-T WAN port · 4 10/100/1000BASE-T LAN ports ·...
  • Page 9 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Software Network functions · DHCP server/relay · Advanced configuration of built-in DHCP server · Stateful/Stateless mode for IPv6 address assignment, IPv6 prefix delegation ·...
  • Page 10 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Software USB interface functions · USB modem Auto connection to available type of supported network (4G/3G/2G) Auto configuration of connection upon plugging in USB modem...
  • Page 11 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Wireless Module Parameters Advanced functions · Super Mesh function · Support of client mode · WMM (Wi-Fi QoS) · Information on connected Wi-Fi clients ·...
  • Page 12 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Wireless Module Parameters Receiver sensitivity · 802.11a -96dBm at 6Mbps -78dBm at 54Mbps · 802.11b -96dBm at 1Mbps -90dBm at 11Mbps ·...
  • Page 13 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Supported USB modems · Alcatel X500 · D-Link DWM-152C1 · D-Link DWM-156A6 · D-Link DWM-156A7 · D-Link DWM 156A8 · D-Link DWM-156C1 ·...
  • Page 14 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Supported USB modems · Alcatel IK40V · D-Link DWM-222 · Huawei E3131 · Huawei E3272 · Huawei E3351 · Huawei E3372s ·...
  • Page 15: Product Appearance

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Product Appearance Upper and Front Panels Figure 1. Upper panel view. Mode Description The router is being loaded. Solid orange The router is powered on.
  • Page 16 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Mode Description A USB device is connected to the router's USB port. Solid green USB 3.0 USB 2.0 No USB device. No light In case the POWER and INTERNET LEDs are blinking orange at the same time, the device is in the emergency mode.
  • Page 17: Back Panel

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Back Panel Figure 2. Back panel view. Port Description USB 2.0 A port for connecting a USB device (modem, storage, printer). LAN 1-4 4 Ethernet ports to connect computers or network devices.
  • Page 18 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Overview User Manual Port Description A button to enable/disable wireless network. To disable the router's wireless network: with the device turned on, WiFi press the button and release. The WLAN 2.4G and WLAN 5G LEDs should turn off.
  • Page 19: Delivery Package

    Ethernet cable • “Quick Installation Guide” (brochure). The “User Manual” and “Quick Installation Guide” documents are available on D-Link website (see www.dlink.ru). Using a power supply with a different voltage rating than the one included will cause damage and void the warranty for this product.
  • Page 20: Chapter 3. Installation And Connection

    “the router”) is performed via the built-in web-based interface. The web-based interface is available from any operating system that supports a web browser. Also you can use D-Link Assistant application for Android or iPhone mobile devices (smartphones or tablets).
  • Page 21 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual USB Modem To connect to an LTE or 3G network, you should use a USB modem. Connect it to the USB port of...
  • Page 22: Connecting To Pc

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Connecting to PC PC with Ethernet Adapter 1. Connect an Ethernet cable between any of LAN ports located on the back panel of the router and the Ethernet port of your PC.
  • Page 23: Obtaining Ip Address Automatically (Os Windows 7)

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window. 2. Select the Network and Sharing Center section. (If the Control Panel has the category...
  • Page 24 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 3. In the menu located on the left part of the window, select the Change adapter settings line. Figure 4. The Network and Sharing Center window.
  • Page 25 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
  • Page 26 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 5. In the Local Area Connection Properties window, on the Networking tab, select the Internet Protocol Version 4 (TCP/IPv4) line. Click the Properties button.
  • Page 27 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 28: Obtaining Ip Address Automatically (Os Windows 10)

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Obtaining IP Address Automatically (OS Windows 10) 1. Click the Start button and proceed to the Settings window. 2. Select the Network & Internet section.
  • Page 29 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 3. In the Change your network settings section, select the Change adapter options line. Figure 9. The Network & Internet window.
  • Page 30 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 4. In the opened window, right-click the relevant Local Area Connection icon and select the Properties line in the menu displayed.
  • Page 31 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 32: Pc With Wi-Fi Adapter

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual PC with Wi-Fi Adapter 1. To connect via USB modem: сonnect your USB modem to one of two USB ports In some cases you will need to reboot the router after connection of the USB modem.
  • Page 33: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 7)

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 7) 1. Click the Start button and proceed to the Control Panel window.
  • Page 34 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 35 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR-882 (for operating in the 2.4GHz band) or DIR-882-5G (for operating in the 5GHz band) and click the Connect button. Figure 16. The list of available networks.
  • Page 36: Obtaining Ip Address Automatically And Connecting To Wireless Network (Os Windows 10)

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Obtaining IP Address Automatically and Connecting to Wireless Network (OS Windows 10) 1. Click the Start button and proceed to the Settings window.
  • Page 37 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual 6. Make sure that the Obtain an IP address automatically and Obtain DNS server address automatically choices of the radio buttons are selected. Click the OK button.
  • Page 38 User Manual 9. In the opened Wireless Network Connection window, select the wireless network DIR- 882 (for operating in the 2.4GHz band) or DIR-882-5G (for operating in the 5GHz band) and click the Connect button. Figure 20. The list of available networks.
  • Page 39: Connecting To Web-Based Interface

    (create a WAN connection, change the parameters of the wireless network, specify the settings of the firewall, etc.). For security reasons, DIR-882 with default settings cannot connect to the Internet. To get started, please set your own password used to access the web-based interface and, if needed, configure other settings recommended by your ISP.
  • Page 40 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual If you configured the device previously, after access to the web-based interface the login page opens. Enter the username (admin) in the Username field and the password you specified in the Password field, then click the LOGIN button.
  • Page 41: Web-Based Interface Structure

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Web-based Interface Structure Summary Page On the Summary page, detailed information on the device state is displayed. Figure 25. The summary page.
  • Page 42 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual The Device Information section displays the model and hardware version of the router, the firmware version, and other data. To contact the technical support group (to send an e-mail), left-click the support e-mail address.
  • Page 43: Home Page

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Home Page The Home page displays links to the most frequently used pages with device's settings. Figure 26. The Home page.
  • Page 44: Menu Sections

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Menu Sections To configure the router use the menu in the left part of the page. In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard...
  • Page 45: Notifications

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Installation and Connection User Manual Notifications The router's web-based interface displays notifications in the top right part of the page. Figure 27. The web-based interface notifications.
  • Page 46: Configuring Via Web-Based Interface

    If you perform initial configuration of the router via Wi-Fi connection, please make sure that you are connected to the wireless network of DIR-882 (see the WLAN name (SSID) on the barcode label on the bottom panel of the device) and click the NEXT button.
  • Page 47 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the opened page, click YES in order to leave the current language of the web-based interface or click NO to select another language.
  • Page 48: Selecting Operation Mode

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Selecting Operation Mode Select the needed operation mode and click the NEXT button. Router In order to connect your device to a wired ISP, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 49 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In order to connect your device to the network of a 3G or LTE operator, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 50: Access Point Or Repeater

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Access Point or Repeater In order to connect your device to a wired router for adding a wireless network to the existing local network, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 51 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In order to connect your device to a wireless router for extending the range of the existing wireless network, on the Device mode page, from the Connection method list, select the Autonomous value.
  • Page 52: Mesh Network Main Device (Master)

    User Manual Mesh Network Main Device (Master) In order to configure DIR-882 as a main device of your mesh network, from the Connection method list, select the Super Mesh value. Then from the Device Role list, select the Master value. From the Frequency band list, select the band where your mesh network operates.
  • Page 53 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In order to connect your main device to the network of a 3G or LTE operator, from the Work mode list, select the Mobile Internet value.
  • Page 54 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In order to connect your main device to a wireless ISP (WISP), from the Work mode list, select the WISP Repeater value. In this mode you can connect your device to another access point, configure a WAN connection, set your own settings for the wireless network in the 2.4GHz and...
  • Page 55: Mesh Network Subordinate Device (Slave)

    User Manual Mesh Network Subordinate Device (Slave) In order to configure DIR-882 as a subordinate device of your mesh network, from the Connection method list, select the Super Mesh value. Then from the Device Role list, select the Slave value. From the Frequency band list, select the band where your main device (in the Master role) operates.
  • Page 56: Creating 3G/Lte Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating 3G/LTE WAN Connection This configuration step is available for the Mobile Internet mode. 1. If the PIN code check is enabled for the SIM card inserted into your USB modem, enter the PIN code in the PIN field and click the APPLY button.
  • Page 57 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If the router failed to create a WAN connection automatically, click the CONFIGURE MANUALLY button. On the Modem settings...
  • Page 58: Changing Lan Ipv4 Address

    If you want to manually assign the LAN IPv4 address for DIR-882, do not select the Automatic obtainment of IPv4 address checkbox and fill in the IP address, Subnet mask, DNS IP address, Hostname fields and, if needed, the Gateway IP address field.
  • Page 59: Wi-Fi Client

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Wi-Fi Client This configuration step is available for the WISP Repeater and Repeater modes. 1. On the Wi-Fi Сlient page, click the WIRELESS NETWORKS button and select the network to which you want to connect in the opened window.
  • Page 60 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The number of the key (from first to fourth) which will be used for Default key ID WEP encryption.
  • Page 61: Configuring Wired Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Configuring Wired WAN Connection This configuration step is available for the Router and WISP Repeater modes. You should configure your WAN connection in accordance with data provided by your Internet service provider (ISP).
  • Page 62: Static Ipv4 Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Static IPv4 Connection Figure 46. The page for configuring Static IPv4 WAN connection. Fill in the following fields: IP address, Subnet mask, Gateway IP address, and DNS IP address.
  • Page 63: Static Ipv6 Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Static IPv6 Connection Figure 47. The page for configuring Static IPv6 WAN connection. Fill in the following fields: IP address, Prefix, Gateway IP address, and DNS IP address.
  • Page 64: Pppoe, Ipv6 Pppoe, Pppoe Dual Stack, Pppoe + Dynamic Ip (Pppoe Dual Access) Connections

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual PPPoE, IPv6 PPPoE, PPPoE Dual Stack, PPPoE + Dynamic IP (PPPoE Dual Access) Connections Figure 48. The page for configuring PPPoE WAN connection.
  • Page 65: Pppoe + Static Ip (Pppoe Dual Access) Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual PPPoE + Static IP (PPPoE Dual Access) Connection Figure 49. The page for configuring PPPoE + Static IP (PPPoE Dual Access) WAN connection.
  • Page 66: Pptp + Dynamic Ip Or L2Tp + Dynamic Ip Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual PPTP + Dynamic IP or L2TP + Dynamic IP Connection Figure 50. The page for configuring PPTP + Dynamic IP WAN connection.
  • Page 67: Pptp + Static Ip Or L2Tp + Static Ip Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual PPTP + Static IP or L2TP + Static IP Connection Figure 51. The page for configuring PPTP + Static IP WAN connection.
  • Page 68: Configuring Wireless Network

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Configuring Wireless Network This configuration step is available for the Mobile Internet, Router, Access point, WISP Repeater, and Repeater modes.
  • Page 69 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual 5. If you want to create an additional wireless network isolated from your LAN in the 2.4GHz band, select the Enable guest network checkbox (available for the Mobile Internet, Router, and WISP Repeater modes only).
  • Page 70: Configuring Lan Ports For Iptv/Voip

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Configuring LAN Ports for IPTV/VoIP This configuration step is available for the Router mode. On the IPTV page, select the Is an STB connected to the device checkbox.
  • Page 71 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the VoIP page, select the Is an IP phone connected to the device checkbox. Figure 55. The page for selecting a LAN port to connect an VoIP phone.
  • Page 72: Changing Web-Based Interface Password

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Changing Web-based Interface Password On this page, you should change the default administrator password. To do this, enter a new password in the User’s interface password and Password confirmation fields.
  • Page 73 If problems of connection have not been solved, contact the technical support of your ISP (as a rule, the technical support phone is provided with the agreement) or the D-Link technical support (the phone number will be displayed on the page after several attempts of checking the connection).
  • Page 74: Connection Of Multimedia Devices

    IPTV set-top box or IP phone. Contact your ISP to clarify if you need to configure DIR-882 in order to use these devices. To start the Wizard, on the Home page, select the Connection of Multimedia Devices section.
  • Page 75 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If you need to configure a connection via VLAN, click the ADVANCED MODE button. Figure 59. The Multimedia Devices Connection Wizard. The advanced mode.
  • Page 76 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual The selected port cannot use the default connection to access the Internet. To deselect the port in the simplified mode, left-click the selected element (the frame will disappear) and click the APPLY button.
  • Page 77: Statistics

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Statistics The pages of this section display data on the current state of the router: • network statistics •...
  • Page 78: Dhcp

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual DHCP The Statistics / DHCP page displays the information on computers that have been identified by hostnames and MAC addresses and have got IP addresses from the DHCP server of the device.
  • Page 79: Routing

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Routing The Statistics / Routing page displays the routing rules and routing tables. Figure 63. The Statistics / Routing page.
  • Page 80 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 64. The routing table page. The opened page displays the information on routes in the selected routing table. The table contains destination IP addresses, gateways, subnet masks, and other data.
  • Page 81: Clients And Sessions

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Clients and Sessions On the Statistics / Clients and Sessions page, you can view the list of devices connected to the local network of the router and information on current sessions of each device.
  • Page 82: Port Statistics

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Port Statistics On the Statistics / Port Statistics page, you can view statistics for traffic passing through ports of the router. The information shown on the page can be used for diagnosing connection problems.
  • Page 83: Multicast Groups

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Multicast Groups The Statistics / Multicast Groups page displays addresses of active multicast groups (including IPTV channels and groups for transferring service information) to which the device is subscribed, and the interface through which the device is subscribed.
  • Page 84: Connections Setup

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Connections Setup In this menu you can configure basic parameters of the router's local area network and configure connection to the Internet (a WAN connection).
  • Page 85 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 69. The Connections Setup / WAN page. The advanced mode. To create a new connection, click the ADD button ( ) in the Connections List section.
  • Page 86: Creating Dynamic Ipv4 Or Static Ipv4 Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating Dynamic IPv4 or Static IPv4 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 87 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 71. The page for creating a new Static IPv4 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 88 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 72. The page for creating a new Static IPv4 connection. The IPv4 section. Parameter Description IPv4 For Static IPv4 type IP address Enter an IP address for this WAN connection.
  • Page 89: Creating Dynamic Ipv6 Or Static Ipv6 Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating Dynamic IPv6 or Static IPv6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 90 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 74. The page for creating a new Static IPv6 connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 91 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description IPv6 For Static IPv6 type IPv6 address Enter an IPv6 address for this WAN connection. The length of the subnet prefix. The value 64 is used usually.
  • Page 92: Creating Pppoe Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating PPPoE WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 93 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 77. The page for creating a new PPPoE connection. The Ethernet section. Parameter Description Ethernet A MAC address assigned to the interface. This parameter is mandatory if your ISP uses MAC address binding.
  • Page 94 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 78. The page for creating a new PPPoE connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 95 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. • No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit key is applied.
  • Page 96 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 79. The page for creating a new PPPoE connection. The IPv4 section. Parameter Description Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
  • Page 97: Creating Pptp, L2Tp, L2Tp Dual Stack, Or L2Tp Over Ipsec Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating PPTP, L2TP, L2TP Dual Stack, or L2TP over IPsec WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 98 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 81. The page for creating a new PPTP connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 99 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. • No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128- bit key is applied.
  • Page 100 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 82. The page for creating a new PPTP connection. The IPv4 section. Parameter Description Obtain DNS server Move the switch to the right to configure automatic assignment of addresses DNS server addresses.
  • Page 101 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Primary IPv6 DNS Enter addresses of the primary and secondary IPv6 DNS servers in server / Secondary the relevant fields.
  • Page 102: Creating Pppoe Ipv6 Or Pppoe Dual Stack Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating PPPoE IPv6 or PPPoE Dual Stack WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 103 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description For the PPPoE Dual Stack type only. Move the switch to the right to allow using RIP for this connection.
  • Page 104 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 87. The page for creating a new PPPoE IPv6 connection. The PPP section. Parameter Description Move the switch to the right if you don't need to enter a username Without authorization and password to access the Internet.
  • Page 105 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Select a method of MPPE encryption. • No encryption: MPPE encryption is not applied. • MPPE 40 128 bit: MPPE encryption with a 40-bit or 128-bit key is applied.
  • Page 106 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 88. The page for creating a new PPPoE Dual Stack connection. The IPv4 section. Parameter Description IPv4 (for the PPPoE Dual Stack type)
  • Page 107 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to configure automatic assignment of Obtain DNS server IPv6 DNS server addresses. Upon that the Primary IPv6 DNS...
  • Page 108: Creating Mobile Internet Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating Mobile Internet WAN Connection If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct...
  • Page 109 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description If the switch is moved to the right, the network address translation function for IPv4 is enabled. Do not disable the function unless your ISP requires this.
  • Page 110 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Modem settings MODEM / SIM CARD Click the button in order to assign the connection to one of SELECTION connected USB modems.
  • Page 111 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The maximum size of units transmitted by the interface. Move the switch to the right if you want the router to...
  • Page 112 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Health Check Move the switch to the right to check the connection health using Enable the ICMP ping mechanism.
  • Page 113: Creating Ipip6 Wan Connection

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Creating IPIP6 WAN Connection On the connection creation page, in the General Settings section, select the relevant value from the Connection type drop-down list and specify the needed values.
  • Page 114 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 95. The page for creating a new IPIP6 connection. The IP section. Parameter Description Obtain remote host Move the switch to the right to configure automatic assignment of a address automatically remote host IPv6 address.
  • Page 115: Lan

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To configure the router's local interface, go to the Connections Setup / LAN page. IPv4 Go to the IPv4 tab to change the IPv4 address of the router, configure the built-in DHCP server, specify MAC address and IPv4 address pairs, or add own DNS records.
  • Page 116 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Available if the Access point or Repeater mode was selected in the Initial Configuration Wizard. Gateway IP address The gateway IPv4 address which is used by the router to connect to the Internet (e.g., for synchronizing the system time with an NTP...
  • Page 117 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description • Relay: An external DHCP server is used to assign IP addresses to clients. When this value is selected, the...
  • Page 118 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the DHCP Options section, you can change default values for some options of DHCP protocol (IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP server should send to clients to configure the local network.
  • Page 119 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv4 address pairs (set a fixed IPv4 address in the local area network for a device with a certain MAC address). The router...
  • Page 120 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To remove a record, in the Hosts section, select the checkbox located to the left of the relevant line in the table and click the DELETE button ( After completing the work with records, click the APPLY button.
  • Page 121: Ipv6

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual IPv6 Go to the IPv6 tab to change or add the IPv6 address of the router, configure IPv6 addresses assignment settings, specify MAC address and IPv6 address pairs, or add own DNS records.
  • Page 122 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Dynamic IPv6 Addresses section, you can configure IPv6 addresses assignment settings. Figure 104. Configuring the local interface. The IPv6 tab. The Dynamic IPv6 Addresses section.
  • Page 123 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Static IP Addresses section, you can specify MAC address and IPv6 address pairs (set a fixed IPv6 address in the local area network for a device with a certain MAC address). The router...
  • Page 124 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To edit an existing record, in the Hosts section, select the relevant line in the table. In the opened window, change the needed parameters and click the SAVE button.
  • Page 125: Wan Reservation

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual WAN Reservation On the Connections Setup / WAN Reservation page, you can enable the WAN backup function, which provides you with uninterrupted access to the Internet. When your main connection breaks down, the router activates the backup connection;...
  • Page 126 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Connections IPv4 section, the existing IPv4 connections are displayed in order of their priority. The first connection on the list serves as the main connection, the others are backup connections.
  • Page 127 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Check with ping section, specify settings of checking the connection using ICMP ping mechanism. Parameter Description Check with ping A time period (in seconds) between regular checks of the hosts’...
  • Page 128: Auto Configuration Of 3G/Lte

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Auto Configuration of 3G/LTE On the Connections Setup / Auto Configuration of 3G/LTE page, you can enable the function for automatic creation of a mobile WAN connection upon plugging a USB modem into the router.
  • Page 129 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If the PIN code check for the SIM card inserted into your USB modem is disabled, then an active WAN connection with the operator's settings will be automatically created when plugging the USB modem into the router.
  • Page 130: Traffic Balancing

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Traffic Balancing On the Connections Setup / Traffic balancing page, you can enable the traffic balancing function. This function enables equal load balancing on the router and increases maximum bandwidth of your Internet connection while using several WAN connections (for example, if access to the Internet is provided by several ISPs).
  • Page 131 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, specify the needed parameters. Parameter Description From the drop-down list, select a WAN connection to which traffic Connection balancing will be applied.
  • Page 132: Vpn

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In this menu you can configure VPN connections based on IPsec/GRE/EoGRE/EoIP protocols and create a PPTP or L2TP server and accounts for access to it.
  • Page 133 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To create a new tunnel, click the ADD button ( ) in the Tunnels section. Setting for both devices which establish the tunnel should be the same.
  • Page 134 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to allow a remote host with any public IP address to connect to the router via IPsec protocol. Such a setting can Dynamic IPsec be specified for one IPsec tunnel only.
  • Page 135 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description An operation mode of the IPsec tunnel. Select a value from the drop- down list. • TUNNEL: As a rule, it is used to create a secure connection to remote networks.
  • Page 136 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 114. The page for adding an IPsec tunnel. The First Phase / The Second Phase sections. Parameter Description...
  • Page 137 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description IKE (Internet Key Exchange) is a protocol of keys exchange between two hosts of VPN connections. Select a version of the protocol from IKE version the drop-down list.
  • Page 138 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 115. The page for adding an IPsec tunnel. The window for adding a tunneled network. In the opened window, you can specify the following parameters:...
  • Page 139: Gre

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the VPN / GRE page, you can configure VPN tunnels based on GRE protocol. GRE (Generic Routing Encapsulation) is a protocol for tunneling network packets, which enables you to create unprotected VPN tunnels.
  • Page 140 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the GRE tunnel.
  • Page 141: Pptp/L2Tp Servers

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual PPTP/L2TP servers On the VPN / PPTP/L2TP servers page, you can enable the PPTP or L2TP VPN server. To configure the PPTP or L2TP server, go to the relevant tab.
  • Page 142 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description VPN network Server local IP address The IP address of the VPN server.
  • Page 143 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Authentication Move the switch to the right to enable authentication. Upon that the Enable authentication Multiple sessions, CHAP, MSCHAP, MSCHAPv2, and PAP lists are displayed on the page.
  • Page 144 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Advanced settings Available on the PPTP tab. Maximum number of The maximum number of devices allowed to connect to the PPTP connections server.
  • Page 145 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description User Select a user account to allow access.
  • Page 146: Vpn Users

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual VPN Users On the VPN / VPN Users page, you can create user accounts to provide authorized access to a PPTP or L2TP server.
  • Page 147: Eogre

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual EoGRE On the VPN / EoGRE page, you can configure VPN tunnels based on EoGRE technology. EoGRE (Ethernet over GRE) technology allows transferring traffic through VPN tunnels in heterogeneous networks, encapsulating Ethernet frames with the help of GRE protocol and transferring them over a network which uses a network protocol of another level.
  • Page 148 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to assign a tag (VLAN ID) to EoGRE Tagged traffic traffic and specify the needed value in the VLAN ID field displayed.
  • Page 149: Eoip

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual EoIP On the VPN / EoIP page, you can configure VPN tunnels based on EoIP technology. EoIP (Ethernet over IP) technology allows creating an Ethernet tunnel between two routers via connections which can transmit IP packets (e.g., IPIP, PPTP connections).
  • Page 150 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual You can specify the following parameters: Parameter Description Move the switch to the right to enable the EoIP tunnel.
  • Page 151 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To edit the parameters of an existing tunnel, in the Tunnels section, select the relevant tunnel in the table. On the opened page, change the needed parameters and click the APPLY button.
  • Page 152: Wi-Fi

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Wi-Fi In this menu you can specify all needed settings for your wireless network. Basic Settings In the Wi-Fi / Basic Settings section, you can change basic parameters for the wireless interface of the router and configure the basic and additional wireless networks.
  • Page 153 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Basic Settings section, the following parameters are available: Parameter Description To enable Wi-Fi connection, move the switch to the right.
  • Page 154 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Move the switch to the right to let the router search for a free Enable periodic channel in certain periods of time. When the switch is moved to the scanning right, the Scanning period field is available for editing.
  • Page 155 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Wi-Fi Network Network name (SSID) A name for the wireless network. If the switch is moved to the right, other users cannot see your Wi-Fi Hide SSID network.
  • Page 156 Parameter Description If the wireless network broadcasting is disabled, devices cannot connect to the wireless network. Upon that DIR-882 can connect to another access point as a wireless client. To enable/disable broadcasting on a schedule, click the Set schedule button ( ).
  • Page 157 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Security Settings section, you can change security settings of the wireless network. By default, the WPA2-PSK network authentication type of both bands of the wireless network is specified.
  • Page 158 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual The WPA , WPA2 , and WPA/WPA2 mixed authentication types require a RADIUS server. When the Open or WEP value is selected, the following settings are displayed on the page (unavailable for the wireless network operating modes which support the standard 802.11n or...
  • Page 159 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description For Open authentication type only. To activate WEP encryption, move the switch to the right. Upon that...
  • Page 160 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual When the WPA, WPA2, or WPA/WPA2 mixed value is selected, the following settings are displayed on the page: Figure 131. The WPA2 value is selected from the Network authentication drop-down list.
  • Page 161: Client Management

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Client Management On the Wi-Fi / Client Management page, you can view the list of wireless clients connected to the router.
  • Page 162: Wps

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the Wi-Fi / WPS page, you can enable the function for configuration of the WLAN and select a method for connection to the WLAN.
  • Page 163 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If you want to disable activating the WPS function via the hardware button, on the tabs of both bands, move the Enable Wi-Fi when WPS function is activated with hardware button switch to the left and make sure that the WPS function is not activated via the web-based interface.
  • Page 164: Using Wps Function Via Web-Based Interface

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Using WPS Function via Web-based Interface To connect to the basic wireless network via the PIN method of the WPS function, follow the next steps: 1.
  • Page 165: Using Wps Function Without Web-Based Interface

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Using WPS Function without Web-based Interface You can use the WPS function without accessing the web-based interface of the router. To do this, you need to configure the following router's settings: 1.
  • Page 166: Wmm

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the Wi-Fi / WMM page, you can enable the Wi-Fi Multimedia function. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
  • Page 167 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To edit the parameters of an Access Category, left-click the relevant line. In the opened window, change the needed parameters.
  • Page 168 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Acknowledgment. Answering response requests while transmitting. Displayed only in the Access Point section. If the switch is moved to the left, the router answers requests.
  • Page 169: Client

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Client On the Wi-Fi / Client page, you can configure the router as a client to connect to a wireless access point or to a WISP.
  • Page 170 Encryption type When you have configured the parameters, click the APPLY button. When connecting to a wireless access point, the wireless channel of DIR-882 will switch to the channel of the access point to which you have connected. In addition, the Connection Information section in which you can view the connection status and the network basic parameters is displayed.
  • Page 171 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If you want to connect to the WISP network, after configuring the device as a client, you need to create a WAN connection with relevant parameters for the WiFiClient_2GHz interface in the 2.4GHz band or for the WiFiClient_5GHz interface in the 5GHz band.
  • Page 172: Additional

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Additional On page of the Wi-Fi / Additional section, you can define additional parameters for the WLAN of the router. To configure the 2.4GHz band or 5GHz band, go to the relevant tab.
  • Page 173 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual The following fields are available on the page: Parameter Description The channel bandwidth for 802.11n standard in the 2.4GHz band (the 2.4 GHz tab).
  • Page 174 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Available on the 5 GHz tab. Move the switch to the right to enable the DFS (Dynamic Frequency Selection) mechanism.
  • Page 175 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Available on the 2.4 GHz tab. The 802.11b and 802.11g protection function is used to minimize collisions between devices of your wireless network.
  • Page 176: Mac Filter

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual MAC Filter On the Wi-Fi / MAC Filter page, you can define a set of MAC addresses of devices which will be allowed to access the WLAN, or define MAC addresses of devices which will not be allowed to access the WLAN.
  • Page 177 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 139. The window for adding a rule for the MAC filter. You can specify the following parameters: Parameter...
  • Page 178 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual After creating the rules you need to configure the filtering modes. To open the basic or additional wireless network for the devices which MAC addresses are specified on this page and to close the wireless network for all other devices, in the section corresponding to the band (2.4 GHz or 5 GHz), left-click the line of the wireless network.
  • Page 179: Super Mesh

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Super Mesh On the Wi-Fi / Super Mesh page, you can enable the Super Mesh function. This function is...
  • Page 180 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 141. The Wi-Fi / Super Mesh page. To activate the Super Mesh function, on the tab of the relevant band, move the Enable Super Mesh switch to the right.
  • Page 181 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description A name of the mesh network. This value should be the same for all devices of your mesh network.
  • Page 182 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The IPv4 and/or IPv6 address of a device. The MAC address of a device. The short name for a mesh network device.
  • Page 183 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The short name for the mesh network device which MAC address is displayed in the Neighbour MAC Address field.
  • Page 184: Roaming

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Roaming On the Wi-Fi / Roaming page, you can enable the function of smart adjustment of Wi-Fi clients. This function is designed for wireless networks based on several access points or routers. If the function is enabled for all access points (routers) which establish a wireless network, then wireless clients will always connect to the device with the highest signal level.
  • Page 185 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To enable the function, click the ENABLE button. Upon that the following settings are available on the page. Parameter...
  • Page 186: Print Server

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Print Server On the Print Server page, you can configure the router as a print server. Being configured in this way, the router will allow your LAN users to share the printer connected to the USB port of the router.
  • Page 187: Usb Storage

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual USB Storage This menu is designed to operate USB storages. Here you can do the following: • view data on the connected USB storage •...
  • Page 188: Usb Users

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual USB Users On the USB Storage / USB Users page, you can create user accounts to provide access to data on the USB storage connected to the router.
  • Page 189: Samba

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Samba On the USB Storage / Samba page, you can enable the built-in Samba server of the router to provide access to the USB storage for users of your LAN.
  • Page 190 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To allow access only to a certain folder of the USB storage, click the ADD ( ) button in the Directories section.
  • Page 191: Ftp

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the USB Storage / FTP page, you can enable the built-in FTP server of the router to provide access to the USB storage for users of your LAN.
  • Page 192 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To disable the built-in FTP server of the router, move the Enable FTP server switch to the left and click the APPLY button.
  • Page 193: Filebrowser

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Filebrowser On the USB Storage / Filebrowser page, you can view the content of your USB storage connected to the router and remove separate folders and files from the USB storage.
  • Page 194: Dlna

    USB storage, or leave the value specified by default (900). In the DLNA server name field, specify a name of the DLNA server which will be displayed for users of your LAN or leave the value specified by default (D-Link DLNA Server). Use digits and/or Latin characters.
  • Page 195 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 152. Specifying a media folder. In the opened window, locate a folder containing files. To do this, click the Search icon ( ) in the Path field.
  • Page 196: Torrent Client

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Torrent Client On the USB Storage / Torrent Client page, you can configure all needed settings for the built-in Transmission client.
  • Page 197 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Locate data of the Transmission client. To do this, click the Search Path ), select the needed value, and click the SELECT button.
  • Page 198 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Web-based interface page field, the address of the web-based interface of the Transmission client is displayed. To access the web-based interface of the Transmission client, click the link.
  • Page 199 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Click the button to restart all downloads. If you limited the maximum number of simultaneous downloads, the Transmission client starts processing of the specified number of torrent files;...
  • Page 200: Xupnpd

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual XUPNPD On the USB Storage / XUPNPD page, you can enable the XUPNPD plug-in. It allows to broadcast media content received from the Internet sources or IPTV service to DLNA-certified devices of your LAN.
  • Page 201: Usb Modem

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual USB Modem This menu is designed to operate USB modems. Some models of USB modems do not allow performing operations available in this menu section through the web-based interface of the router.
  • Page 202: Basic Settings

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Basic Settings On the USB Modem / Modem name / Basic Settings page, you can view data on the USB modem connected to the router, change the PIN code of the SIM card inserted into your USB modem, disable or enable the check of the PIN code.
  • Page 203 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Network information Mode A type of the network to which the USB modem is connected. RSSI The strength of the signal received by the USB modem.
  • Page 204 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If upon one of the operations described above you have entered an incorrect value in the PIN code field three times (the number of remaining attempts is displayed in the PIN input window), the SIM card inserted into your USB modem is blocked.
  • Page 205: Sms

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual When a new text message is received, the relevant notification will be displayed in the top right corner of the page. Click the CHECK button. After clicking the button, the USB Modem / Modem name / SMS page opens.
  • Page 206 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To create and send a text message, click the New message button ( Figure 162. The window for creating a new text message.
  • Page 207: Ussd

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual USSD On the USB Modem / Modem name / USSD page, you can send a USSD command. USSD (Unstructured Supplementary Service Data) is a technology which provides real-time message exchange between a subscriber and a mobile operator's special application.
  • Page 208: Advanced

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Advanced In this menu you can configure advanced settings of the router: • create or edit VLANs • use LAN ports of the router as additional WAN ports and also use the WAN port as a LAN port •...
  • Page 209: Vlan

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual VLAN On the Advanced / VLAN page, you can edit existing and create new virtual networks (VLAN), e.g., for distinguishing traffic or specifying additional WAN interfaces.
  • Page 210 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To create a new VLAN, click the ADD button ( Figure 166. The page for adding a VLAN. You can specify the following parameters:...
  • Page 211 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Select a type for each port included in the VLAN. • Untagged: Untagged traffic will be transmitted through the specified port.
  • Page 212: Wan Assignment

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual WAN Assignment On the Advanced / WAN assignment page, you can use LAN ports of the router as additional WAN ports and also use the WAN port as a LAN port.
  • Page 213: Using Wan Port As Lan Port

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Using WAN Port as LAN Port To configure the WAN port of the router to be used as a LAN port, follow the next steps: 1.
  • Page 214: Snmp

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual SNMP On the Advanced / SNMP page, you can enable and configure the SNMP agent of the router. The SNMP agent is a service which sends data on the state and settings of the device where is it enabled to the SNMP manager (the network management system of your ISP or system administrator).
  • Page 215 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In order to enable the SNMP agent, in the Configuration section, move the Enable SNMP switch to the right. Then specify the needed parameters.
  • Page 216 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual If the SNMP manager operates over SNMPv3, create a read-only user which will be used by the SNMP manager to get data on the device. To do this, in the Users section, click the ADD button ( Figure 169.
  • Page 217 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To edit a user, select the relevant line in the table. In the opened window, change the needed values and click the SAVE button.
  • Page 218: Dns

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the Advanced / DNS page, you can add DNS servers to the system. Figure 170. The Advanced / DNS page.
  • Page 219 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Specify needed settings for IPv4 in the DNS IPv4 section and for IPv6 in the DNS IPv6 section. If you want to configure automatic obtainment of DNS servers addresses, move the Manual switch to the left.
  • Page 220: Ddns

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual DDNS On the Advanced / DDNS page, you can define parameters of the DDNS service, which allows associating a domain name with dynamic IP addresses.
  • Page 221 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the opened page, you can specify the following parameters: Parameter Description Move the switch to the right to enable DDNS.
  • Page 222: Ports Settings

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Ports Settings On the Advanced / Ports Settings page, you can configure or disable autonegotiation of speed and duplex mode or manually configure speed and duplex mode for each Ethernet port of the router.
  • Page 223 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 174. The window for changing the settings of the router's port. In the opened window, specify the needed parameters:...
  • Page 224 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Autonegotiation Modes To enable the needed data transfer modes, move relevant switches to the right. Flow control Move the switch to the right to enable the flow control function for the port.
  • Page 225: Redirect

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Redirect On the Advanced / Redirect page, you can enable notifications on the reason of the Internet connection failure. Notifications will be displayed in the browser window when a user is attempting to open a web site on the Internet.
  • Page 226: Routing

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Routing On the Advanced / Routing page, you can specify static (fixed) routes. Figure 176. The Advanced / Routing page.
  • Page 227 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the route.
  • Page 228: Tr-069 Client

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual TR-069 Client On the Advanced / TR-069 Client page, you can configure the router for communication with a remote Auto Configuration Server (ACS).
  • Page 229 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Inform Settings Move the switch to the right so the router may send reports (data on the device and network statistics) to the ACS.
  • Page 230: Port Mirroring

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Port Mirroring On the Advanced / Port Mirroring page, you can enable the function of mirroring the router’s ports. This function allows to copy traffic from one or several ports to the destination port to monitor network issues with the help of traffic analysis software.
  • Page 231 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Select the mode for each port traffic from which should be copied to the destination port. •...
  • Page 232: Upnp Igd

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual UPnP IGD On the Advanced / UPnP IGD page, you can enable the UPnP IGD protocol. The router uses the UPnP IGD protocol for automatic configuration of its parameters for network applications requiring an incoming connection to the router.
  • Page 233: Udpxy

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual UDPXY On the Advanced / UDPXY page, you can allow the router to use the built-in UDPXY application. The UDPXY application transforms UDP traffic into HTTP traffic. This application allows devices which cannot receive UDP streams to access stream video.
  • Page 234 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To access the status page of the application, click the Status link. Figure 182. The UDPXY application status page.
  • Page 235: Igmp/Mld

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual IGMP/MLD On the Advanced / IGMP/MLD page, you can allow the router to use IGMP and MLD and specify needed settings.
  • Page 236 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Enable Move the switch to the right to enable MLD. MLD version Select a version of MLD from the drop-down list.
  • Page 237: Alg/Passthrough

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual ALG/Passthrough On the Advanced / ALG/Passthrough page, you can allow the router to use RTSP, enable the SIP ALG and PPPoE/PPTP/L2TP/IPsec pass through functions.
  • Page 238 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual The following elements are available on the page: Parameter Description Move the switch to the right to enable SIP. Such a setting allows using the SIP ALG function.
  • Page 239: Coovachilli

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual CoovaChilli The CoovaChilli service provides authorized Internet access for clients in your corporate or public network. On the Advanced / CoovaChilli page, you can add an authorization server.
  • Page 240 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the Main Settings section, you can specify the following parameters: Parameter Description From the drop-down list, select a physical or virtual interface to be used for the authorization server.
  • Page 241 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The password which the router uses for communication with the RADIUS encryption key RADIUS server (the value of this parameter is specified in the RADIUS server settings).
  • Page 242 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 189. The page for adding an authorization server. The UAM section. In the UAM section, you can specify the following parameters:...
  • Page 243: Vrrp

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual VRRP On the Advanced / VRRP page, you can enable VRRP (Virtual Router Redundancy Protocol), which is designed to improve availability of routers acting as default gateways. The protocol enables you to configure several devices as the default virtual router with a common IP address, which is used as the default gateway by LAN clients.
  • Page 244 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual When the protocol is enabled, the following elements are displayed on the page: Parameter Description The operation mode of the router.
  • Page 245 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description The preempt mode enables a backup router to switch to the Master mode if its priority level is higher than the priority of the current Master.
  • Page 246: Firewall

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Firewall In this menu you can configure the firewall of the router: • add rules for IP filtering •...
  • Page 247 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 192. The page for adding a rule for IP filtering. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the rule.
  • Page 248 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description A protocol for network packet transmission. Select a value from the Protocol drop-down list. An IP version to which the rule will be applied. Select the relevant IP version value from the drop-down list.
  • Page 249 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description End IPv4 address / The destination host end IPv4 or IPv6 address. End IPv6 address Subnet IPv4 address / The destination subnet IPv4 or IPv6 address.
  • Page 250: Virtual Servers

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Virtual Servers On the Firewall / Virtual Servers page, you can create virtual servers for redirecting incoming Internet traffic to a specified IP address in the local area network.
  • Page 251 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Figure 194. The page for adding a virtual server. You can specify the following parameters: Parameter Description General Settings Move the switch to the right to enable the server.
  • Page 252 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description A protocol that will be used by the new virtual server. Select a value Protocol from the drop-down list.
  • Page 253 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To edit the parameters of an existing server, select the relevant line in the table. On the opened page, change the needed parameters and click the APPLY button.
  • Page 254: Dmz

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual A DMZ is a host or network segment located “between” internal (local) and external (global) networks. In the router, the DMZ implements the capability to transfer a request coming to a port of the router from the external network to a specified host of the internal network.
  • Page 255 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To set a schedule for the DMZ, click the Set schedule button ( ). In the opened window, you can create a new schedule (see the Schedule section, page 272) or use the existing one.
  • Page 256: Mac Filter

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual MAC Filter On the Firewall / MAC Filter page, you can configure MAC-address-based filtering for computers of the router's LAN.
  • Page 257 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description Move the switch to the right to enable the rule.
  • Page 258: Url Filter

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual URL Filter On the Firewall / URL Filter page, you can specify restrictions on access to certain web sites and define devices to which the specified restrictions will be applied.
  • Page 259 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To specify URL addresses to which the selected filtering mode will be applied, in the Addresses section, click the ADD button ( ).
  • Page 260 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To enable the URL filter for the time specified in the schedule and disable it at the other time, select the Enable rule value from the Action drop-down list and click the SAVE button.
  • Page 261: Adblock

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual AdBlock On the Firewall / AdBlock page, you can enable the function of blocking advertisements which appear during web surfing.
  • Page 262: Remote Access

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Remote Access On the Advanced / Remote Access page, you can configure access to the web-based interface of the router. By default, the access from external networks to the router is closed. If you need to allow access to the router from the external network, create relevant rules.
  • Page 263 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description A name for the rule for easier identification. You can specify any Name name.
  • Page 264 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To remove a rule for remote access, select the checkbox located to the left of the relevant line in the...
  • Page 265: System

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual System In this menu you can do the following: • change the password used to access the router's settings •...
  • Page 266: Configuration

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Configuration On the System / Configuration page, you can change the password for the administrator account used to access the web-based interface of the router and to access the device settings via TELNET...
  • Page 267 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual The following buttons are also available on the page: Control Description Click the button to restore the factory default settings. Also you can...
  • Page 268: Firmware Update

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Firmware Update On the System / Firmware Update page, you can update the firmware of the router and configure the automatic check for updates of the router's firmware.
  • Page 269 Configuring via Web-based Interface User Manual By default, in the Remote server URL field, the D-Link update server address (fwupdate.dlink.ru) is specified. To add one more address, click the ADD button and enter the address in the displayed line. To remove the address, click the Delete icon ( ) in the line of the address.
  • Page 270: Local Update

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Local Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
  • Page 271: Remote Update

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Remote Update Attention! Do not turn off the router before the firmware update is completed. This may cause the device breakdown.
  • Page 272: Schedule

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Schedule On the System / Schedule page, you can enable/disable Wi-Fi connection and the Wi-Fi filter, configure automatic reboot of the device on a schedule, and set a schedule for different rules and settings of the firewall.
  • Page 273 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, in the System Time field, the system time of the device is displayed. You can select the Simplified mode choice of the radio button and specify the following parameters:...
  • Page 274 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To set a schedule for a task which will be applied to a rule or setting of the firewall or will...
  • Page 275 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Simplified mode Specify the time period for performing a task. • Every minute. • Every hour: When this value is selected, the Time field is displayed in the section.
  • Page 276: Log

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual On the System / Log page, you can set the system log options and configure sending the system log to a remote host and/or a USB storage connected to the router.
  • Page 277 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description Logging Select a type of logging from the drop-down list. • Local: The system log is stored in the router's memory. When this value is selected, the Server and Port fields are not displayed.
  • Page 278 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To disable logging of the system events, move the Enable switch to the left and click the APPLY button.
  • Page 279: Ping

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Ping On the System / Ping page, you can check availability of a host from the local or global network via the Ping utility.
  • Page 280 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 210. The System / Ping page. The additional settings window.
  • Page 281: Traceroute

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Traceroute On the System / Traceroute page, you can determine the route of data transfer to a host via the traceroute utility.
  • Page 282 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To specify additional settings, click the MORE SETTINGS button. Figure 212. The System / Traceroute page. The additional settings window.
  • Page 283: Telnet/Ssh

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Telnet/SSH On the System / Telnet/SSH page, you can enable or disable access to the device settings via TELNET and/or SSH from your LAN. By default, access is disabled.
  • Page 284: System Time

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual System Time On the System / System Time page, you can manually set the time and date of the router or configure automatic synchronization of the system time with a time server on the Internet.
  • Page 285 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Additional settings are also available on the page: Parameter Description Move the switch to the right if NTP servers addresses are provided by your ISP.
  • Page 286: Auto Provision

    On the System / Auto Provision page, you can enable the Auto Provision function. The Auto Provision function allows your ISP to manage the device’s settings remotely: DIR-882 connects to the ISP’s server, compares the current configuration file with the configuration file stored on this server, and updates its settings if the files are different.
  • Page 287 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Parameter Description File name The location of the configuration file on the ISP's server. A time period (in seconds) between attempts to compare the current File check period configuration file with the configuration file on the ISP's server.
  • Page 288: Yandex.dns

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Yandex.DNS This menu is designed to configure the Yandex.DNS service. Yandex.DNS is a web content filtering service which provides the DNS server, protects a computer against malicious web sites, and blocks access to adult web sites.
  • Page 289 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual When the service is enabled, the Default Mode section is displayed on the page. Select the needed choice of the radio button to configure filtering for all devices of the router's network.
  • Page 290: Devices And Rules

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Devices and Rules On the Yandex.DNS / Devices and Rules page, you can specify a filtering mode for each device separately.
  • Page 291 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, you can specify the following parameters: Parameter Description The MAC address of a device from the router's LAN. You can enter...
  • Page 292: Skydns

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual SkyDNS This menu is designed to configure the SkyDNS service. SkyDNS is a web content filtering service which provides protection against malicious web sites for devices connected to the router's network, and also allows to configure filtering, block access to adult web sites, and use search engines safely.
  • Page 293: Settings

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Settings On the SkyDNS / Settings page, you can enable the SkyDNS service and specify settings for its operation.
  • Page 294 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual To change the parameters of your account on the SkyDNS service web site, click the Go to personal profile page link.
  • Page 295: Devices And Rules

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual Devices and Rules On the SkyDNS / Devices and Rules page, you can assign a specific filtering profile to a device connected to the router's network.
  • Page 296 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Configuring via Web-based Interface User Manual In the opened window, specify the following parameters: Parameter Description The MAC address of a device from the router's LAN to which the specified filtering profile will be applied.
  • Page 297: Chapter 5. Operation Guidelines

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Operation Guidelines User Manual CHAPTER 5. OPERATION GUIDELINES Safety Rules and Conditions Please carefully read this section before installation and connection of the device. Make sure that the power adapter and cables are not damaged.
  • Page 298: Wireless Installation Considerations

    RF noise in your home or office. To maximize your wireless range, follow the guidelines below. 1. Keep the number of walls and ceilings between the DIR-882 device and other network devices to a minimum – each wall or ceiling can reduce your wireless network range by 3- 90 feet (1-30 meters).
  • Page 299: Chapter 6. Abbreviations And Acronyms

    DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Abbreviations and Acronyms User Manual CHAPTER 6. ABBREVIATIONS AND ACRONYMS Third Generation Access Category Advanced Encryption Standard Access Point Address Resolution Protocol BPSK Binary Phase-shift Keying...
  • Page 300 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Abbreviations and Acronyms User Manual Global System for Mobile Communications HTTP Hypertext Transfer Protocol HTTPS Hypertext Transfer Protocol Secure ICMP Internet Control Message Protocol Identifier...
  • Page 301 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Abbreviations and Acronyms User Manual Maximum Transmission Unit Network Address Translation Network Interface Controller Network Time Protocol OFDM Orthogonal Frequency Division Multiplexing Password Authentication Protocol...
  • Page 302 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Abbreviations and Acronyms User Manual Simultaneous Authentication of Equals Subscriber Identification Module Session Initiation Protocol Server Message Block SNMP Simple Network Management Protocol Secure Shell...
  • Page 303 DIR-882 AC2600 Wave 2 MU-MIMO Wi-Fi Gigabit Router with 3G/LTE Support and 2 USB Ports Abbreviations and Acronyms User Manual Wi-Fi Protected Access Wi-Fi Protected Setup Page 303 of 303...

Table of Contents