Table of Contents
Advertisement
1-2-5. Installation and Removal of Boards
c
To avoid shock hazards and/or damage to the mounted circuit boards, be sure to turn off the breaker at the
outside of the control panel or unplug the power cord before installing and/or removing the mounted
circuit boards.
Removal of Retainers
The retainers are installed to the following boards.
. KY-318A, 318B and 318C Boards
. KY-319A, 319B and 319C Boards
. KY-320 Board
. KY-321 Board
. KY-322 Board
. KY-324 Board
. KY-325 Board (BKDS-7032)
. KY-328 Board (BKDS-7030)
. KY-329 Board (BKDS-7031)
. KY-331 Board
. KY-332 Board
. KY-367 Board
. KY-395C Board (BKDS-7033)
(1) Remove the board installing with the retainer.
(2) Pinch the board spacers on the board using a pair of long-nose priers. Pull out the board while
releasing the lock.
n
For the board spacer is necessary to release the lock, the small hole as a mark opens at the side of the
board spacer onto the retainer.
Board
DVS-7000AE MMP1
http://getMANUAL.com
Board spacer (A)
Hole
Retainer
1-2. Control Panel
1-2-5. Installation and Removal of Boards
1-27
Advertisement
Table of Contents
Troubleshooting
