Table of Contents
Advertisement
Quick Links
WARNING AND CAUTION
WARNING AND CAUTION
RISK OF ELECTRIC SHOCK
RISK OF ELECTRIC SHOCK
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This symbol warns he user that uninsulated voltage within the unit may have
sufficient magnitude to cause electric shock. Therefore, if it is dangerous to make
any kind of contact with any part inside of the unit.
This symbol alerts the user that important literature concerning the operation
and maintenance of this unit has been included. Therefore, it should be read
carefully in order to avoid any problems.
WARNING
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS UNIT TO RAIN OR
MOISTURE. ALSO DO NOT USE THIS UNITS POLARIZED PLUG WITH AN EXTENSION CORD
RECEPTACLE O R OUTLETS, UNLESS THE PRONGS CAN BE FULLY INSERTED. REFRAIN
FROM OPENING THE CABINET, AS THERE ARE HIGH-VOLTAGE COMPONENTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
DOC COMPLIANCE NOTICE
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations.
WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed t o provide reasonable protection
against harmful interference when the equipment is operated in a residential environment. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment loss cause harmful interference radio or television reception, which can be determined by
powering the unit on and off, the user is encouraged to try to correct the interference of his or hers
own expense.
DO NOT OPEN
DO NOT OPEN
1
Advertisement
Table of Contents
Related Manuals for NEC MultiSync XV2930
Summary of Contents for NEC MultiSync XV2930
- Page 1 RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER-SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol warns he user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock.
-
Page 2: Warnings And Safety Precaution
Moreover, there is a serious risk of electric shock. 6. Do not attempt to service or repair the unit. NEC is not liable for any bodily harm or damage caused if unqualified persons attempt service or open the back cover. Refer all service to authorized NEC Service Centers. -
Page 3: Limited Warranty
LIMITED WARRANTY LIMITED WARRANTY NEC Multimedia Monitor Products NEC Technologies, Inc. (hereafter NECTECH) warrants this product to be free from defects in material and workmanship under the following terms. HOW LONG IS THE WARRANTY Parts and labor are warranted for (1) One Year and CRT’s for (1) One year from the date of the first customer purchase. - Page 4 Due to the size and weight of large screen presentation monitor products, it is preferable to solve problems on-site rather than to incur the expense and risk of damage in return shipping. NEC's service policies and procedures make it an effortless as possible for you to receive factory authorized and trained service of your location.
-
Page 5: Specifications
SPECIFICATIONS SPECIFICATIONS 1. Cathode ray tube a. tube size b. Dot pitch c. Light transmission 2. Power a. Input voltage b. Input current c. Inrush current d. Power consumption e. Line regulation 3. Input signal Video signal a. Type b. Polarity c. - Page 6 6. Horizontal size Vertical size 7. User controls 8. Operating temperature 9. Unit dimension (with base): packaging dimension: 10. Net weight of unit: 11. The table below is required timings and technical description for the 27” tube (H=520mm, V=388mm standard size) Mode No Resolution &...
-
Page 7: Connecting Your Monitor
3. AV2 INPUT: These terminals are for video and stereo audio signals, used with video equipment like a VCR, Laser disc or DVD player. 4. RGB SOUND INPUT: These terminals are for audio signal when the monitor is used in RGB mode. - Page 8 LOCATION OF CONTROLS (ON FRONT PANEL) LOCATION OF CONTROLS (ON FRONT PANEL) Front View...
- Page 9 LOCATION OF CONTROLS (ON FRONT PANEL) LOCATION OF CONTROLS (ON FRONT PANEL)
-
Page 10: Installation
(or video equipment) and display are switched off. High leakage current, earth connection essential before connecting supply. 1. Connect the video cable (AV, S-Video or RGB cable) and audio cable to your monitor. 2. Connect the AC power cord to your monitor. -
Page 11: Using The Monitor's Features
RGB: Rotation, Bass and Treble. Press this button to switch the woofer ON/OFF Each time the button is Each time you turn on your monitor it is automatically degaussed. To view the monitors current settings press menu +/- button and an On... - Page 12 The On-Screen Display menus of RGB mode and AV/S mode appear below. RGB menu On Screen Display AV/S menu On Screen Display To change monitor settings of the Master Picture Menu, you must choose a category, and then adjust the value of each categories. Here’s how to select a category: Press the menu + or menu - button while the master picture menu is on screen.
- Page 13 RGB menu On Screen Display Brightness. Select this icon to adjust the overall picture brightness (image black level). Set the brightness so that the dark areas of the monitor remain black. Press the adj - button to decrease brightness. Press the adj + button to increase brightness.
- Page 14 AV/S menu On Screen Display Brightness. Select this icon to adjust the overall picture brightness (image black level). Set the brightness so that the dark areas of the monitor remain black. Press the adj– button to decrease brightness. Press the adj + button to increase brightness.
-
Page 15: Power Management Function
POWER MANAGEMENT FUNCTION The following is a description of these power states and the power consumed in each state: MODE H-SYNC green Pulse power saving yellow No pulse power saving yellow Pulse power saving yellow No pulse Note: The power management function requires TTL horizontal and vertical sync. Power saving is invalid if display is in AV mode. -
Page 16: Troubleshooting
Trouble condition Cause No Picture 1. Power cord disconnected? 2. Power switch on? 3. Signal cable properly connected? 4. Monitor in power save mode? Color is abnormal 1. Magnetic object nearby? (such as speaker) 2. Direction of screen changed during operation? 3.